• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.418-421
• /
• 2001

The ceramic filters were developed using technology similar to that of quartz crystal and electromechanical filter. However, the key to this development involved the theoretical analysis of vibration modes and material improvements of piezoelectric ceramics. The primary application of ceramic filters has been for consumer-market use. Accordingly, a major emhpasis has involved mass production technology, leading to low-priced devices. A typical ceramic filter includes monolithic resonators and capacitors packaged in unique configurations. Nakazawa developed a double-mode resonator as two acoustically coupled single resonators. And he developed 10.7MHz crystal filters using multi-energy trapping mode of thickness shear vibration. He succeeded in realizing a two-pole band pass filter response without external inductance by splitting a dot electrode to creat coupled symmetric and antisymmetric vibration modes. Accordingly, the simulation for ceramic filter were important. So that, this paper were investigated the pass frequency of filter on the electrode length and thickness of ceramic.

• Current Optics and Photonics
• /
• 제7권2호
• /
• pp.207-212
• /
• 2023

In this paper, we introduce our system for manufacturing a Rb vapor cell and describe its fabrication process in a sequence of removing impurities, cold trapping, and sealing off. Saturated absorption spectroscopy was performed to verify the quality of our cell by comparing it to that of a commercial one. By using the lab-fabricated Rb vapor cell, we observed electromagnetically induced transparency in a ladder-type system corresponding to the 5S_1/2-5P_3/2-28D_5/2 transition of the ⁸⁵Rb atom. A highly excited Rydberg atomic system was prepared using two counter-propagating external cavity diode lasers with wavelengths of 780 nm and 480 nm. We also observed the Autler-Townes splitting signal while a radio-frequency source around 100 GHz incidents into the Rydberg atomic medium.

• 한국통신학회논문지
• /
• 제30권5A
• /
• pp.436-444
• /
• 2005

다중 안테나 시스템에서 UMM (unitary matrix modulation)을 사용한 방법을 USTM (unitary space-time modulation)이라 부른다. OFDM 시스템에서 coherence bandwidth 만큼의 이격을 두고 UMM의 대각 행렬을 이용한 방법이 제안되고 있다. 또한 최근에 디코딩 방법이 간단하고 좋은 성능을 갖는 LDPC (low density parity check) 코드에 대한 연구가 진행되고 있다. 본 논문에서 UMM (unitary matrix modulation)을 사용하고 LDPC 코디드 된 OFDM 시스템을 제안한다. 또한 다중 송신 안테나를 사용하여 송신 diversity 이득을 얻는 것이 아니라, 하나의 송신 안테나를 이용하여 채널의 coherence bandwidth 만큼의 주파수 간격 (splitting)을 두어 채널에 대한 주파수 이득을 고려하여 UMM/OFDM 시스템을 설계 하였다. 이 방법을 이용하여 본 논문에서 제안된 UMM-S/OFDM에 대한 성능 특성을 다중 경로 Rayleigh 페이딩 채널 환경에서 시뮬레이션을 통하여 검증하였다.

• 방송공학회논문지
• /
• 제20권2호
• /
• pp.215-223
• /
• 2015

에너지 하베스팅 기술은 에너지가 제약적인 환경에 있는 통신 기기가 정보 송신에 필요한 에너지를 얻는 충전 기술이다. 최근에 제안된 에너지 하베스팅 기술은 주변의 무선 고주파 신호로부터 에너지를 저장한다. 대표적으로 시간 전환 (time switching, TS) 과 전력 분할 (power splitting, PS) 의 기술이 있다. 본 논문은 무선 인지 중계 네트워크에서 이차 사용자의 중계기가 정보 전송을 위해 에너지 하베스팅 기술을 사용할 때 최적의 에너지 하베스팅 시간을 분배하는 방법을 제안한다. 이차 사용자의 중계기는 시간 전환 기술을 사용하여 이차 사용자의 송신기에서 보낸 신호로부터 정보와 에너지를 전달받는다. 이차 사용자의 순시적 처리량을 최대화 하기 위하여 이차 사용자 중계기의 하베스팅 시간을 최적화 한다. 컴퓨터 시뮬레이션을 통해 고정된 하베스팅 시간을 사용하는 방식보다 본 논문에서 제안한 방법으로 구한 최적의 하베스팅 시간을 사용하는 것이 더 큰 순시적 처리량을 얻음을 확인하였다.

• 한국항행학회논문지
• /
• 제26권1호
• /
• pp.15-21
• /
• 2022

본 논문은 부하에 서로 다른 복소 임피던스로 종단되면서 출력 분배 비율이 다른 비대칭 전력 분배기를 구현하는 방법을 제안하였다. 제안된 방법은 출력의 종단된 복소 임피던스를 전송선로만을 이용하여 특정 임피던스 또는 특정 복소임피던스 값으로 정합하는 방법을 사용하여 설계하였으며, 또한 종단 복소 임피던스 포트 사이의 고립도를 만족하기 위한 고립회로를 설정하는 방법을 제시하였다. 이러한 방법의 타당성을 증명하기 위해서, 입력포트는 50 Ω이고 서로 다른 출력 복소 임피던스를 갖으면서 분배 비율이 k² = 3 dB 와 1.7 dB 인 경우와 모든 포트가 서로 다른 복소 임피던스로 종단되어 있으면서 분배 비율이 k² = 3 dB를 갖는 비대칭 전력분배기를 중심주파수 2 GHz에서 설계하였으며, 전기적 특성의 실험 결과는 시뮬레이션과 잘 일치함을 확인하였다.

• 한국전산유체공학회지
• /
• 제13권4호
• /
• pp.33-38
• /
• 2008

For study on the unsteady blockage effect, flows around a rotationally oscillating circular cylinder with relatively low forcing frequency in closed test-section wind tunnels have been numerically investigated by solving compressible Navier-Stokes equations. The numerical scheme is based on a node-based finite-volume method with the Roe's flux-difference splitting and an implicit time-integration method coupled with dual time-step sub-iteration. The computed results of the oscillating cylinder in the test section showed that the fluctuations of lift and drag are augmented by the blockage effects. The drag further increases because of low base pressure. The pressure on the test section wall shows the harmonics having the oscillating and the shedding frequencies contained in the blockage effect.

• ETRI Journal
• /
• 제37권1호
• /
• pp.61-65
• /
• 2015

In this paper, a novel filtering power divider with external isolation resistors is presented. The proposed power divider can be considered as an integration of a bandpass filter and a Gysel power divider. Based on the circuit topology, a high-order filtering power divider can be easily realized. Odd- and even-mode models are employed to analyze the filtering and power splitting functions. For demonstration, a third-order filtering power divider operating at 1.5 GHz is designed and implemented. The measured results exhibit an isolation between the output ports that is better than 20 dB at around the center frequency.

• 대한기계학회논문집B
• /
• 제30권1호
• /
• pp.8-15
• /
• 2006

A Sparse Point Representation(SPR) based on interpolation wavelets is presented. The SPR is implemented for the purpose of CFD data compression. Unlike conventional wavelet transformation, the SPR relieves computing workload in the similar fashion of lifting scheme that includes splitting and prediction procedures in sequence. However, SPR skips update procedure that is major part of lifting scheme. Data compression can be achieved by proper thresholding method. The advantage of the SPR method is that, by keeping even point physical values, low frequency filtering procedure is omitted and its related unphysical thresholing mechanism can be avoided in reconstruction process. Extra singular feature detection algorithm is implemented for preserving singular features such as shock and vortices. Several numerical tests show the adequacy of SPR for the CFD data. It is also shown that it can be easily extended to nonlinear adaptive wavelets for enhanced feature capturing.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 제11회 정기총회 및 00년 동계학술발표회 논문집
• /
• pp.124-125
• /
• 2000

We introduce a scheme with a maximized efficiency of detecting atoms passing through an optical standing-wave mode cavity. Consider a standing-wave optical cavity illuminated by a weak probe beam through one of its mirrors where the transmission through the other mirror is monitored by a photodetector. If an atom is put in the cavity, the atom-cavity coupling shifts the resonance frequency of the system via the so-called normal mode splitting, and thereby the transmission power will drop. In fact, this type of atom detection scheme has been used in recent single atom trap experiments In practice, however, the field in a standing-wave mode will have a geometrical structure having nodes and antinodes that when the atom traverses the cavity through one of the nodes, there will be no such effect of atom-field interaction. (omitted)

• 한국전산유체공학회지
• /
• 제10권2호
• /
• pp.60-68
• /
• 2005

For study on the unsteady wall interference effect, flows around a forced oscillating airfoil in closed test-section wind tunnels have been numerically investigated by solving compressible Navier-Stokes equations. The numerical scheme is based on a node-based finite-volume method with the Roe's flux-difference splitting and an implicit time-integration method coupled with dual time-step sub-iteration. The Spalart-Allmaras one-equation model is employed for the turbulence effect. The computed results of the oscillating airfoil having a thin wake showed that the lift curve slope is increased and the magnitude of hysteresis loop is reduced by the interference effects. Since the vortex around the airfoil is generated and convected downstream faster than the free-air condition, the phase of lift, drag and pitching moment coefficients was shifted. The pressure on the test section wall shows harmonic terms having the oscillating frequency contained in the wail effect.