• 제목/요약/키워드: Frequency Separation

검색결과 570건 처리시간 0.028초

생체 청각기구를 모사한 폴리머 박막의 주파수 분리 특성 평가 (Characterization of Frequency Separation in Polymer Membranes Mimicking a Human Auditory System)

  • 송원준;배성재;김완두
    • 비파괴검사학회지
    • /
    • 제31권5호
    • /
    • pp.516-521
    • /
    • 2011
  • 청각기관인 달팽이관에 존재하는 기저막의 중요한 기능은 등자뼈로부터 전달되는 진동에너지를 주파수별로 분리하는 것이다. 본 연구에서는 인간 기저막의 형상을 모사하여 설계한 매크로 스케일의 폴리머 박막을 사용하여 주파수 분리 특성을 연구하였다. 각각의 폴리머 박막상의 위치에 따른 변위 분포는 LDV (laser Doppler vibrometer) 스캐닝 기법을 이용하여 측정하였고, 측정된 결과는 후처리 과정을 거쳐 주파수별로 분리하였다. 인가된 주파수에 따른 최대 변위 발생 위치를 추출하여 각 박막에 대한 주파수-최대 변위 발생 위치 관계를 도식화하였다. 아울러 박막 두께 및 물성치가 주파수-최대 변위 발생 위치 관계에 미치는 영향에 대해서도 논하였다.

시간-주파수 마스킹과 고차 신호 통계를 이용한 음향 반향신호 제거 (Acoustic Echo Cancellation using Time-Frequency Masking and Higher-order Statistics)

  • 김경재;남상원
    • 전기학회논문지
    • /
    • 제56권3호
    • /
    • pp.629-631
    • /
    • 2007
  • In hands-free full-duplex communication systems, acoustic signals picked up by the microphones can be mixed with echo signals as well as noises, which may result in poor performance of the corresponding communication system. Also, the system performance may decrease further if the reverberation occurs since it is harder to estimate the impulse response of the demixing system. For blind source separation (BSS) in such cases, a time-frequency masking approach can be employed to separate undesired echo signals and noises, but, permutation ambiguities also should be solved for the echo cancellation. In this paper, we propose a new acoustic echo cancellation (AEC) approach utilizing the time-frequency masking and higher-order statistics, whereby a desired signal selection, based on coherence and third-order statistics (i.e., kurtosis), is introduced along with output signal normalization. Simulation results demonstrate that the proposed approach yields better echo and noise cancellation performances than the conventional AEC approaches.

X 대역 해상이동위성업무 추가 주파수 분배를 위한 지구탐사위성업무와의 양립성 연구 (A Compatibility Study Between New Allocation to Maritime Mobile Satellite Service and Earth Exploration Satellite Service in X-band)

  • 오대섭;정남호;김수영
    • 한국위성정보통신학회논문지
    • /
    • 제8권3호
    • /
    • pp.41-46
    • /
    • 2013
  • 본 논문은 현재 ITU-R에서 논의되고 있는 7/8 GHz대역 해상이동위성업무를 위한 신규 주파수 분배 연구 중 8025 - 8400 MHz 대역에서 지구탐사위성업무와의 주파수 공유 가능성을 검토하였다. 8 GHz 대역을 이용하려는 해상이동위성업무의 송신 지구국은 동대역에서 운용되는 지구탐사위성업무의 수신 지구국으로 해로운 간섭 영향을 미칠 수 있다. 따라서 본 논문에서는 8 GHz 대역에서 해상이동위성업무의 상향링크가 동 대역에 이미 주파수가 분배된 지구탐사위성업무로 미치는 간섭 영향에 대해 분석하고, 주파수 대역을 공유하기 위한 공유 조건으로 두 업무의 무선국간 이격거리를 제시하였다. 우리나라는 2017년경에 정지궤도 복합위성을 발사할 예정이며 이 위성을 이용한 지구탐사업무 지구국과 동 대역의 해상이동위성업무 송신 지구국의 시스템 파라미터를 이용하여 두 업무간 간섭량 및 주파수 공유를 위한 이격 거리를 계산하였다. 최악 조건을 가정한 본 연구의 분석 결과에 따르면 가시 경로가 존재하는 경우 및 지형 조건을 고려하여 비가시 경로에 대한 이격거리는 각각 약 474 km, 약 200 km 정도 이다.

A survey of experience-based preference of Nickel-Titanium rotary files and incidence of fracture among general dentists

  • Lee, WooCheol;Song, Minju;Kim, Euiseong;Lee, Hyojin;Kim, Hyeon-Cheol
    • Restorative Dentistry and Endodontics
    • /
    • 제37권4호
    • /
    • pp.201-206
    • /
    • 2012
  • Objectives: The purpose was to investigate the preference and usage technique of NiTi rotary instruments and to retrieve data on the frequency of re-use and the estimated incidence of file separation in the clinical practice among general dentists. Materials and Methods: A survey was disseminated via e-mail and on-site to 673 general dentists. The correlation between the operator's experience or preferred technique and frequency of re-use or incidence of file fracture was assessed. Results: A total of 348 dentists (51.7%) responded. The most frequently used NiTi instruments was ProFile (39.8%) followed by ProTaper. The most preferred preparation technique was crown-down (44.6%). 54.3% of the respondents re-used NiTi files more than 10 times. There was a significant correlation between experience with NiTi files and the number of re-uses (p = 0.0025). 54.6% of the respondents estimated experiencing file separation less than 5 times per year. The frequency of separation was significantly correlated with the instrumentation technique (p = 0.0003). Conclusions: A large number of general dentists in Korea prefer to re-use NiTi rotary files. As their experience with NiTi files increased, the number of re-uses increased, while the frequency of breakage decreased. Operators who adopt the hybrid technique showed less tendency of separation even with the increased number of re-use.

퍼텐셜 자료의 깊이 분리 (Separation-sounding Filter for Potential Data)

  • 박영수;임무택;임형래
    • 지구물리와물리탐사
    • /
    • 제15권2호
    • /
    • pp.51-56
    • /
    • 2012
  • 특정한 지질 구조에 의한 이상을 분리하는 문제, 특히 깊이가 다른 샘들에 의하여 중첩된 이상을 수직적으로 분리하는 문제는 중력과 자력탐사 자료 해석에서 매우 필수적이며 중요한 과정이라 할 수 있다. 측정된 퍼텐셜 자료를 단순하게 광역 효과와 남은 이상의 합으로 가정할 수도 있지만, 수직적으로 여러 층인 구조인 경우로 확장하여 특정한 층에 의한 효과를 분리해 내거나 분리된 이상을 깊이에 관하여 정량적으로 규정할 수 있으면, 이것은 깊이 분리라고 부를 수 있을 것이다. 깊이 분리 필터로서 로그 파워 빛띠 분석을 이용한 진동수 필터를 제안한다. 이것을 수치 모델링과 흥해 일대에서 얻은 실제 중력탐사 자료에 적용하였으며, 2 배 깊이만큼 위로 연속 필터와 비교, 검토해 보았다. 수치 모델링과 실제 중력 자료에 적용한 바에 의하면, 이 논문에서 제안한 깊이 분리 필터는 지구물리적인 의미가 있는 중력 불연속면까지의 중력 효과를 잘 벗겨냄으로써 불연속면의 중력 분포를 추정하여 지질 구조를 해석하는 데에 유용한 도구임을 보여주었다.

이차원 타원형 날개꼴의 실속제어에서 간헐제트 브로잉의 효과 (Effects of Pulsating Jet Blowing on Stall Control of Two Dimensional Elliptic Airfoil)

  • 이기영;손명환;정형석
    • 한국항공우주학회지
    • /
    • 제33권9호
    • /
    • pp.1-8
    • /
    • 2005
  • 이차원 타원형 날개꼴에서 펄스제트 브로잉에 의한 박리 제어 효과에 대하여 연구하였다. 박리 유동의 능동제어기술 개발을 위하여 압축공기를 사용하는 연속제트/간헐제트 엑츄에이터를 설계제작하여 타원형 날개 풍동 실험 모델에 장착하였다. 아음속 유동에서 날개 주위 유동장의 PIV 측정과 유동의 가시화을 통하여 간헐제트 브로잉의 타원형 날개의 실속제어 효과와 실용성에 대해 실험연구를 수행하였다. PIV 실험 결과 제트 브로잉에 의해 난류 후류 영역과 박리 버블의 크기를 현저하게 감소시킴으로써 박리제어가 가능함을 보였다. 간헐제트는 연속제트보다 박리제어에 보다 효과적이었다. 간헐제트의 주파수를 증가시키면 보다 높은 받음각에 이르기까지 난류 박리 후류를 효과적으로 억제할 수 있었다.

첩릿변환을 이용한 비틀림 유도파 모드분리 (Mode Separation in Torsional Guided Waves Using Chirplet Transform)

  • 김영완;박경조
    • 한국소음진동공학회논문집
    • /
    • 제24권4호
    • /
    • pp.324-331
    • /
    • 2014
  • The sensor configuration of the magnetostrictive guided wave system can be described as a single continuous transducing element which makes it difficult to separate the individual modes from the reflected signal. In this work we develop the mode decomposition technique employing chirplet transform based on the maximum likelihood estimation, which is able to separate the individual modes from dispersive and multimodal waveform measured with the magnetostrictive sensor, and estimate the time-frequency centers and individual energies of the reflection, which would be used to locate and characterize defects. Simulation results on a carbon steel pipe are presented, which show the accurate mode separation and more discernible time-frequency representation could become enabled using the proposed technique.

A Study on Vocal Separation from Mixtured Music

  • Kim, Hyun-Tae;Park, Jang-Sik
    • Journal of information and communication convergence engineering
    • /
    • 제9권2호
    • /
    • pp.161-165
    • /
    • 2011
  • Recently, According to increasing interest to original sound Karaoke instrument, MIDI type karaoke manufacturer attempt to make more cheap method instead of original recoding method. Separating technique for singing voice from music accompaniment is very useful in such equipment. We propose a system to separate singing voice from music accompaniment for stereo recordings. Our system consists of three stages. The first stage is a spectral change detector. The second stage classifies an input into vocal and non vocal portions by using GMM classifier. The last stage is a selective frequency separation stage. The results of removed by listening test from the results for computer based extraction simulation, spectrogram results show separation task successfully. Listening test with extracted MR from proposed system show vocal separating and removal task successfully.

Post-Processing with Frequency Domain Wiener Filter for Blind Source Separation

  • Park, Keun-Soo;Park, Jang-Sik;Kim, Hyun-Tae;Son, Kyung-Sik
    • The Journal of the Acoustical Society of Korea
    • /
    • 제25권2E호
    • /
    • pp.36-42
    • /
    • 2006
  • In this paper, a novel post processing using Wiener filtering technique is proposed to p rm further interference reduction in FDICA. Using the proposed method, the target signal components are remained with little attenuation while the interference components are drastically suppressed. The results of experiments show that the proposed method achieves a reduction of the residual crosstalk. Compared to the NLMS method, the proposed method has slightly better separation performance in SIR, and even requires much less computational complexity.

Blind Source Separation for OFDM with Filtering Colored Noise and Jamming Signal

  • Sriyananda, M.G.S.;Joutsensalo, Jyrki;Hamalainen, Timo
    • Journal of Communications and Networks
    • /
    • 제14권4호
    • /
    • pp.410-417
    • /
    • 2012
  • One of the premier mechanisms used in extracting unobserved signals from observed mixtures in signal processing is employing a blind source separation (BSS) algorithm. Orthogonal frequency division multiplexing (OFDM) techniques are playing a prominent role in the sphere of multicarrier communication. A set of remedial solutions taken to mitigate deteriorative effects caused within the air interface of OFDM transmission with aid of BSS schemes is presented. Four energy functions are used in deriving the filter coefficients. Energy criterion functions to be optimized and the performance is justified. These functions together with iterative fixed point rule for receive signal are used in determining the filter coefficients. Time correlation properties of the channel are taken advantage for BSS. It is tried to remove colored noise and jamming components from themixture at the receiver. Themethod is tested in a slow fading channel with a receiver containing equal gain combining to treat the channel state information values. The importance is that, these are quite low computational complexity mechanisms.