• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1194-1197
• /
• 2004

High temporal-resolution and accurate measurement of skin impedance locus provides useful data for the identification of the physiological/psychological changes and also the identification of acupuncture point. An impedance spectroscopy method using digitally constructed current waveform consisting of many frequency components (multiples of 1Hz) was reported3. The time resolution of the method depends on the lowest frequency used in the waveform construction, and therefore, the measurement would be faster if the lowest frequency is the higher. However, it was not clear that how many and how low frequencies must be used for the estimation of the skin impedance parameters from which the impedance locus can be drawn. This study shows the relationship between the estimation error of the impedance parameters and the frequency coverage of the spectroscopy. The results of this study are expected to serve as the reference of the frequency selection in the impedance spectroscopy.

• 한국소음진동공학회논문집
• /
• 제16권7호
• /
• pp.769-776
• /
• 2006

A measured frequency response function can be represented as a ratio of two polynomials. A curve-fitting of frequency responses with Legendre polynomialis suggested in the paper. And the suggested curve-fitting algorithm is based on the least-square error method. Since the Legendre polynomials satisfy the orthogonality condition, the curve-fitting with the polynomials results to more reliable curve-fitting than ordinary polynomial method. Though the proposed curve-fitting with Legendre polynomials cannot cover all frequency range of interest, example shows that the suggested method is quite applicable in a limited frequency band.

• 소음진동
• /
• 제9권3호
• /
• pp.570-576
• /
• 1999

This paper presents numerical and experimental results of modal parameter identification in a generator stator frame for 500 MW fossil power plants. A commercial finite element analysis S/W was employed for modal analysis. The generator is excited by alternating electromagnetic forces, mainly of 120 Hz in 60 Hz machines, due to magnetic field and electric current in windings. It is necessary to verify that the stator frame has adequate frequency margin from the excitation frequency to avoid possible resonance when operating. Thus, frequency margin required for the stator frame is established using the numerical and experimental results. The results show that the stator frame meets the frequency-margin requirements. Also, results of modal analysis for design modification in order to reduce weights of the stator frame without deteriorating vibration characteristics are presented.

• 말소리와 음성과학
• /
• 제8권1호
• /
• pp.37-44
• /
• 2016

The goal of the current study is to investigate how the sound change is reflected in production or in perception, and what the effect of lexical frequency is on the loss of sound contrasts. Specifically, the current study examined whether the vowel length contrasts are retained in Korean speakers' productions, and whether Korean listeners can distinguish vowel length minimal pairs in their perception. Two production experiments and two perception experiments investigated this. For production tests, twelve Korean native speakers in their 20s and 40s completed a read-aloud task as well as a map-task. The results showed that, regardless of their age group, all Korean speakers produced vowel length contrasts with a small but significant differences in the read-aloud test. Interestingly, the difference between long and short vowels has disappeared in the map task, indicating that the speech mode affects producing vowel length contrasts. For perception tests, thirty-three Korean listeners completed a discrimination and a forced-choice identification test. The results showed that Korean listeners still have a perceptual sensitivity to distinguish lexical meaning of the vowel length minimal pair. We also found that the identification accuracy was affected by the word frequency, showing a higher identification accuracy in high- and mid- frequency words than low frequency words. Taken together, the current study demonstrated that the speech mode (read-aloud vs. spontaneous) affects the production of the sound undergoing a language change; and word frequency affects the sound change in speech perception.

• 대한기계학회논문집A
• /
• 제28권10호
• /
• pp.1467-1474
• /
• 2004

In this study, a new damage identification method for beam-like structures with a fatigue crack is proposed. which does not require comparative measurement on an intact structure but require several measurements at different level of excitation forces on the cracked structure. The idea comes from the fact that dynamic behavior of a structure with a fatigue crack changes with the level of the excitation force. The 2$^{nd}$ spatial derivatives of frequency response functions along the longitudinal direction of a beam are used as the sensitive indicator of crack existence. Then, weighting function is employed in the averaging process in frequency domain to account for the modal participation of the differences between the dynamic behavior of a beam with a fatigue crack at the low excitation and one at the high excitation. Subsequently, a damage index is defined such that the location and level of the crack may be identified. It is shown from the analysis of vibration measurements in this study that comparison of frequency response characteristics of a beam with a single fatigue crack at different level of excitation forces enables an effective detection of the crack.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.79-85
• /
• 2003

One of unique characteristics of guided waves is a dispersive behavior that guided wave velocity changes with an excitation frequency and mode. In practical applications of guided wave techniques, it is very important to identify propagating modes in a time-domain waveform for determination of defect location and size. Mode identification can be done by measurement of group velocity in a time-domain waveform. Thus, it is preferred to generate a single or less dispersive mode But in many cases, it is difficult to distinguish a mode clearly in a time-domain waveform because of superposition of multi modes and mode conversion phenomena. Time-frequency analysis is used as efficient methods to identify modes by presenting wave energy distribution in a time-frequency. In this study, experimental guided wave mode identification is carried out in a steel plate using time-frequency analysis methods such as wavelet transform. The results are compared with theoretically calculated group velocity dispersion curves. The results are in good agreement with analytical predictions and show the effectiveness of using the wavelet transform method to identify and measure the amplitudes of individual guided wave modes.

• Transactions on Electrical and Electronic Materials
• /
• 제11권1호
• /
• pp.20-23
• /
• 2010

The analog front end (AFE) of a radio frequency identification transponder using the ISO 14443 type A standard with a 100% amplitude shift keying (ASK) modulation is proposed in this paper and verified by circuit simulations and measurements. This AFE circuit, using a 13.56 MHz carrier frequency, consists of a rectifier, a modulator, a demodulator, a regulator, a power on reset, and a dynamically enabled digital phase locked loop (DPLL). The DPLL, with a charge pump enable circuit, was used to recover the clock of a 100% modulated ASK signal during the pause period. A high voltage lateral double diffused metal-oxide semiconductor transistor was used to protect the rectifier and the clock recovery circuit from high voltages. The proposed AFE was fabricated using the $0.18\;{\mu}m$ standard CMOS process, with an AFE core size of $350\;{\mu}m\;{\times}\;230\;{\mu}m$. The measurement results show that the DPLL, using a demodulator output signal, generates a constant 1.695 MHz clock during the pause period of the 100% ASK signal.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.837-840
• /
• 1997

This paper provides an experimental verification of an FRF-based structural damage identification method (SDIM) developed by the authors for beam structures. The FRF-based SDIM requires the following data : (1) natural frequencies and mode shapes measured at the intact state and (2) the FRF-data measured at the damaged state. Experiments are conducted for the cantilevered beam with one slot and three slots. It is shown that the FRF-based SDIM developed by the authors provide very successful damage identification results which agree well with true damage state.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 봄 학술발표회 논문집
• /
• pp.292-299
• /
• 2002

In this paper a new damage identification theory is developed in order to identify the locations, severities, and orientations of local damages, all together at a time, by using the frequency response functions measured from damaged plate. Finally, the effects of damage orientation on the vibration responses of a plate are numerically investigated, and the numerically simulated damage identification tests are conducted to verify the present damage identification theory.

• 대한기계학회논문집A
• /
• 제22권2호
• /
• pp.458-466
• /
• 1998

In this work, a frequency domain method is tested numerically and experimentally to improve nonlinear model parameters using the frequency response function at the nonlinear element connected point of structure. This method extends the force-state mapping technique, which fits the nonlinear element forces with time domain response data, into frequency domain manipulations. The force-state mapping method in the time domain has limitations when applying to complex real structures because it needd a time domain lumped parameter model. On the other hand, the frequency domain method is relatively easily applicable to a complex real structure having nonlinear elements since it uses the frequency response function of each substurcture. Since this mehtod is performed in frequency domain, the number of equations required to identify the unknown parameters can be easily increased as many as it needed, just by not only varying excitation amplitude bot also selecting excitation frequency domain method has some advantages over the classical force-state mapping technique in the number of data points needed in curve fit and the sensitivity to response noise.