• Journal of the Korean Geographical Society
• /
• v.41 no.6 s.117
• /
• pp.657-669
• /
• 2006

Rates and processes of bare patch denudation were observed at Janggumokoreum(1,710m) and Minoruem(1,600m) in order to clarify some characteristics of turf exfoliation in the subalpine grassland of Mt. Halla. The bare patches have marginal terrace fronts with a maximum height of 85 cm. The terrace risers usually develop an overhanging edge 2 to 38 cm long that eventually hangs down and protects the riser beneath. The patches are largely covered with angular pebbles and cobbles. The mean rate of riser retreat for the period 2002-2004 is 39.2 mm, equivalent to 19.6 mm/yr. However, there is a disparity of the rate of riser retreat at individual sites. The maximum rate is 131 mm measured at Janggumokoreum patch while the minimum rate is 0 mm at Minoreum patch. The rate of riser retreat also varies with seasons. The thawing season of April exhibits a maximum rate of retreat. The freezing season of October and November and the rainy season of June and July show relatively high rates of retreat. Several Processes such as frost action, aeolian deflation, rainwash, rainsplash and fauna activity cause the denudation of bare patches. In particular, the needle ire action which is combined with rainwash or deflation plays a primary role in turf exfoliation due to the diurnal freeze-thaw cycles occurred over 100 days, melted snow and strong wind in the subalpine zone of Mt. Halla. Rainwash is also an important contributing process in the rainy season because Mt. Halla has the highest precipitation in Korea. By contrast, rainsplash erosion has a minor effect on the bare patch denudation due to the overhanging edge of terrace risers. Recent increase in roe deer appears to be responsible for turf destruction.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.1
• /
• pp.1-7
• /
• 2016

In this research, it used cement powder and reduction slag, which generates high hydration heat in hydration reaction without heat cure below $-5^{\circ}C$ degree. Purpose of final research is preventing freezing and thawing by making the compressive strength 5MPa in 3days below zero temperature due to own heat of concrete. and it is the result of physical characteristic and thermal property evaluation of reduction slag. Because reduction slag generates high hydration heat, compressive strength development is excellent. By generating highly hydration heat by $C_{12}A_7$ and $C_3A$ in reduction slag, compressive strength is developed in low temperature. In case of displacing only reduction slag without $SO_3$, it is indicated that quick-setting occurs by shortage of $SO_3$. For preventing quick-setting, gypsum is used essentially. According to this research result, in case of using reduction slag and gypsum as a ternary system, compressive strength developed 5MPa in 3 days below zero temperature. It is identified to prevent early frost damage of concrete below zero temperature.

• Journal of the Korea Concrete Institute
• /
• v.15 no.4
• /
• pp.529-540
• /
• 2003

Recently, the researches on the durability design of concrete structures have been studied. As the examples, models to evaluate the service life prediction of the structure have been developed. The purpose of this article is to develop the model for predicting remaining service life. The final aim is to provide the user time for repairing the concrete structures. In addition, it makes possible to maintain the concrete structure economically. 70 reservoirs out of the inland concrete structures were selected and concrete structures of their components were surveyed. Two methods were used for measuring carbonation; TG/DTA method and Phenolphtalein indicator and, the value of pH was measured by the pH meter, After deriving correlations of calcium carbonate and used year, duration from completion year to 2002, pH value, and concrete cover depth the model was developed for predicting remaining service life by measuring data as small as possible. The conventional models had been developed on the basis of experiment data obtained from the restricted lab environment like as carbon gas exposure. On the other hand this model was developed on the basis of measuring data obtained from the real field that the complex deterioration actions are occurred such as freezing and thawing, carbonation, steel corrosion, and so on. The reliability of the developed model will be evaluated high in this point and this model can help to maintain concrete structures economically by providing the manager time to repair the deteriorated concrete structures in site of facility management.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.2
• /
• pp.246-253
• /
• 2012

In this study, we determined the optimum blanching conditions for pretreatment of Aster scaber prior to freezing to ensure its long, safe preservation as a fine cooking ingredient. Frozen-thawed A. scaber did not significantly differ between blanching groups, but the blanched group showed significantly higher Hunter L, a, and b values than the un-blanched group (p<0.05). Higher temperatures and longer treatment times increased softness; hardness did not significantly differ between the blanched and un-blanched groups of frozen-thawed A. scaber (p<0.05). Total bacterial counts and the presence of coliforms seemed to decline with blanching treatments, but treatment temperature and time did not influence this reduction. Over 95% of peroxidase activity was inactivated by blanching treatment but increased slightly after thawing. The sensory evaluation of the frozen-thawed A. scaber by test group showed the A. scaber blanched at $90^{\circ}C$ for 3 min to be the most highly preferred (p<0.05).

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.4
• /
• pp.1499-1508
• /
• 2013

Freeze-thaw tests were performed on gneiss samples collected from Terra Nova Bay, Antarctica in order to examine the engineering properties of rocks with slightly weathered (SW) and moderately weathered (MW). The tests were conducted under temperature ranging from $20{\pm}2^{\circ}C$ to $-20{\pm}2^{\circ}C$. A cycle of test consisted of 5 hours of freezing followed by another 5 hours of thawing under full saturation. In this paper, total 200 cycles of freeze-thaw test were performed with measurements of porosity, absorption, ultrasonic velocity, and shore hardness per each 20 cycle and that of uniaxial compressive strength (UCS) per each 50 cycle. The UCS of the SW rocks approximately decreased 0.07 MPa per a single cycle, while that of MW rocks decreased around 0.2 MPa per a single cycle. During the 200 cycles of SW rocks, the absorption increased from 0.23% to 0.39%, the P-wave velocity decreased from 4,054 m/s to 3,227 m/s and S-wave velocity decreased from 2,519 m/s to 2,079 m/s. Similarly, those of MW rocks changed from 0.65% to 1.6%, 3,207 m/s to 2,133 m/s and 2,028 m/s to 1,357 m/s. In conclusion, it was inferred that the properties of SW rocks experienced approximately 200-300 cycles of freeze-thaw process become close to those of MW rocks.

• Journal of Life Science
• /
• v.22 no.5
• /
• pp.587-594
• /
• 2012

TMR (total mixed ration) feed was developed by adding mugwort and was fed to Korean black cattle. The effects on the physicochemical properties of the Korean black cattle, when fed mugwort, were investigated, as was the feasibility of producing beef with high quality and functionality. Korean black cattle were reared by using basal TMR (control) and basal TMR supplemented with mugwort of middle fattening 4.6% and late fattening 6.5% (treatment). The content of total catechin in Korean black cattle fed with the control and treatment was 0.262 and 0.379 mg/kg, respectively, while the content of epicatechin was 0.042 and 0.059 mg/kg, respectively, both of which were a significant increase from feeding the cattle TMR with mugwort ($p$ <0.05). There was no significant difference between the control and treatment in terms of $L^*$ (lightness), $b^*$ (yellowness), pH, VBN (volatile basic nitrogen) content, bacterial counts, water-holding capacity, freezing loss, thawing loss, cooking loss, cohesiveness, chewiness, shear force, and sensory score. TBARS (2-thiobarbituric acid reactive substances) and springiness for the control were significantly higher than the treatment ($p$ <0.05). The $a^*$ (redness), EDA (electron donating ability), hardness, and gumminess for the treatment were significantly higher than for the control ($p$ <0.05). These results suggest that the feed containing mugwort can be used to improve color and increase antioxidant ability as functional feed.

• Korean Journal of Food Science and Technology
• /
• v.34 no.1
• /
• pp.24-29
• /
• 2002

The study was performed to investigate the degrees of gelatinization at various processing steps during the preparation of Dangmyuns using sweet potato, potato, corn and tapioca starches, and also determined the rehydration of the freeze dried sweet potato Dangmyun. The degrees of gelatinization after extrusion cooking showed higher value than other processing steps. The degrees of gelatinization after extrusion cooking were 63.5% in sweet potato, 80.0% in potato, 82.3% in corn, and 86.5% in tapioca Dangmyuns. The degree of gelatinization in Dangmyuns after extrusion cooking step decreased as the processing steps, such as cold storage, freezing, thawing, and sun drying, progressed. L values of color in Dangmyuns decreased in the order of corn>tapioca>potato>sweet potato Dangmyuns. The cooking loss decreased in the order of tapioca>corn>potato>sweet potato Dangmyuns. The percentage of weight gain was the highest in sweet potato Dangmyun followed by corn, potato, and tapioca Dangmyuns. The water absorption rate constant was the highest in sweet potato Dangmyun followed by corn, potato, and tapioca Dangmyuns. In the rehydration of freeze dried Dangmyuns, freeze dried sweet potato Dangmyun showed better than the others. An increase from 60% to 70% of the added amount of water in the mixing step resulted in an increase of the degrees of gelatinization after extrusion cooking from $63.4{\sim}70.7%$ to $73.8{\sim}75.0%$. An increase of the added water in the mixing step and a decrease of diameter in the extrusion cooking step slightly improved the rehydration in the boiled water of freeze dried sweet potato Dangmyun.

• Asian Journal of Turfgrass Science
• /
• v.16 no.2
• /
• pp.65-73
• /
• 2002

Studies were conducted to determine the effect of undersoil heating on growth and quality of turfgrasses including Kentucky bluegrass (Poa pratensis L.‘Nuglade’), perennial ryegrass (Lolium perenne L.‘Accent’), tall fescue (Festuca arundinacea Schreb.‘Pixie’), and Korean lawngrass (Zoysia japonica Steud.) in simulated athletic field during winter season in Korea. Mineral contents in clippings of turfgrasses grown at different soil mixtures and temperatures were also analyzed. Undersoil heating (approximately 20$\pm$2$^{\circ}C$) was effective in protecting turfgrasses except Korean lawngrass from freezing injury and discoloration of shoots due to extremely cold temperatures during midwinter. Among turfgrasses grown at undersoil heating zone, tall fescue and perennial ryegrass showed the highest clipping weights and chlorophyll contents, respectively. However, anthocyanin contents of shoots were higher in Kentucky bluegrass. There was little or no difference in clipping weights, chlorophyll contents, anthocyanin contents and greenness of shoots between turfgrasses grown at two soil mixtures composed of 80% sand＋10% peat moss＋10% soil (v/v/v) and 80% sand＋20% pea moss (v/v). Contents of mineral K, Ca and Mg in clippings of cool-season turfgrasses were comparatively higher in a soil mixture composed of 80% sand＋10% peat moss＋10% soil, but little difference in contents of N and P was observed between two soil treatments. Results indicated that undersoil heating can improve quality of turf surface by thawing soil, melting snow, and maintaining shoot growth and greenness of turfgrasses in sports field during winter season.

• Journal of Embryo Transfer
• /
• v.22 no.1
• /
• pp.21-26
• /
• 2007

본 연구는 mSOF(modified synthetic oviduct fluid medium) 배양액을 이용하여 $100{\mu}1$와 $10{\mu}1$ 배양 소적에서 일본 흑우의 수정란 생산 효율을 개선하기 위하여 수행하였다. 난구세포가 부착된 미성숙 난자는 각각 단독 배양조건($S;\;10{\mu}1$ 소적) 및 그룹 배양 조건 ($G;\;100{\mu}1$ 소적)에서 실시하였고 배양액은 TCM-199의 기본 배지에 10% FCS, 0.02IU/ml FSH와 $1{\mu}g/ml$ $estradiol-17{\beta}$를 첨가하여 사용하였다. 배반포 단계로 발육한 수정란은 1.5M ethylene glycol로 직접 이식법에 의한 동결 방법으로 동결을 실시하였고, 세포수는 융해 후 생존 수정란에 대해 조사하였다. 체외 배양 시간이 $16{\sim}17$시간 배양 조건에서 난자의 성숙율은 그룹 배양 조건$(27.1{\pm}16.8%)$보다는 단독 배양조건$(57.1{\pm}15.0%)$에서 성숙율이 높았다(p<0.05). 그러나 체외 배양 시간이 $18{\sim}19$ 시간과 $20{\sim}21$시간 배양시는 유사한 성숙율을 보였다. 난자의 체외 배양율은 체외 배양 시간의 증가에 의해 성숙도가 $86.3{\pm}9.9%$로 증가하였다. 접합체(zygote)의 분할율은 단독이나 그룹 배양 조건에서도 유사한 결과를 얻었다. 배반포 발달율은 배양 $7{\sim}8$일째에 조사한 결과 단독 배양 방법보다는 그룹 배양 방법에서 발달율이 높았으나, 분할된 접합체를 기준으로 한 경우 배반포 발달율$(S;\; 21.4{\pm}10.6%,\;G;\;39.0{\pm}13.1%)$에서는 유의적인 차이가 없었다. 단독 배양과 그룹 배양에서 $6.5{\pm}8$일 사이에 배반포로 발달된 수정란의 세포수 조사에서는 유사한 결과를 얻었다. 동결 융해 후 24시간 배양 후 배반포 생존율(5; 24.2%, G; 30.2%), 부화율(S: 20.9%, G: 12.7%) 및 생존 수정란수(S; 45.2%, G: 42.8%)에서도 배양 조건에 따른 유의적인 차는 없었다. 결론적으로 mSOF배양액을 이용하는 경우 미성숙 난자의 체외 성숙 유도 배양 시 단독이나 그룹 배양 시 배반포 발달율에서 그룹간에 유의적인 차가 인정되었다(p<0.01).

• Journal of the Korean GEO-environmental Society
• /
• v.18 no.8
• /
• pp.23-32
• /
• 2017

For exposed slopes, the weathering degree over time has a major effect on the engineering properties of rocks and the slope stability. Rocks are gradually changed by weathering into soil over time, and the resulting physical, chemical and mechanical changes of rocks affect the engineering stability of the slope. However, there are not many ways to objectively evaluate the weathering degree of a slope. In this study, therefore, to investigate the weathering characteristics of rocks, granite, gneiss and shale distributed in the Chungbuk region were sampled by weathering stage and changes in their component minerals and tissues were investigated. Furthermore, artificial weathering was induced using the freezing and thawing test and quantitatively investigated through porosity and absorption rate. In addition, the changes of microcracks due to artificial weathering were evaluated through box fractal dimension ($D_B$). Through mineralogical study the phase change of constituting minerals, the growth of secondary minerals, the development of micro-cracks and the fabric changes due to weathering were observed. The mineralogical, chemical and engineering evaluations of the weathering degree through the experimental results in this study are expected to be useful for analyzing the weathering characteristics and causes by rock type and for proposing a methodology to evaluate the degradation of physical properties comparatively and quantitatively.