• 제목/요약/키워드: Freeze and burst

검색결과 13건 처리시간 0.028초

빅데이터 기반 인공지능 동파위험 정보서비스 개발을 위한 연구 (A Study on the development of big data-based AI water meter freeze and burst risk information service)

  • 이진욱;김성훈;이민재
    • 한국건설관리학회논문집
    • /
    • 제24권3호
    • /
    • pp.42-51
    • /
    • 2023
  • 겨울철 동파는 물사용 불가, 2차 피해 및 계량기 교체비용 발생 등 많은 사회적 비용을 발생시키고 있다. 정부에서는 지방상수도 시설의 현대화를 위해 많은 노력을 기울이고 있으며, 특히나 전국적으로 SWM 사업을 추진 중에 있다. 본 연구에서는 수용가의 최접점에 설치되는 스마트 미터링에 착안하여 기존의 대기온도가 아닌 계량기 함내 온도를 기반으로 하는 새로운 동파위험 알림 정보서비스를 계획하였다. 또한 본 연구에서는 전국적으로 설치된 스마트미터의 수량적인 한계를 극복하기 위하여, 온도센서로부터 취득된 자료들을 바탕으로 물리적인 온도센서가 없는 지역의 온도를 예측하는 인공지능 기반의 온도예측 모델을 개발하였고, 최적화 과정을 통해 전국을 대상으로 하는 수도계량기 동파위험 정보서비스(안)을 구상하였다.

혹한기 지역에서의 자연순환형 태양열 시스템 동파방지 (Freeze Protection for Passive Solar Water Heating System in Bitter Cold Areas)

  • 권재욱;김종현;홍희기
    • 한국태양에너지학회 논문집
    • /
    • 제31권5호
    • /
    • pp.41-46
    • /
    • 2011
  • In the present work, a new freeze protection method has been proposed for a natural circulation system of solar water heater. Though electrothermal wire is popularly used for the purpose, there are freezing troubles by wire cut-off and excessive electric power consumption. In the experimental device, hot water in a storage tank was circulated by a small pump and used to heat the outdoor pipes if the cold water pipe surface temperature falls lower than a set point. As a result, It was observed that there was no hot water waste while the solar water heating system operated without freeze and burst.

대학건물의 에너지 소비 특성에 관한 사례분석 (A Case Study of Electric Power Consumption Characteristics in University Building)

  • 이왕제;이동원;이재범;윤종호;신우철
    • 한국태양에너지학회 논문집
    • /
    • 제32권4호
    • /
    • pp.90-95
    • /
    • 2012
  • Of school buildings, university building requires various case analysis unlike buildings in the elementary, middle and high schools in accordance with its characteristic for variables such as characteristic of department, construction structure and material, the number of persons admitted and schedule. Through the case research on the 'D' university located in Daejeon, this study made a comparison on the monthly and yearly consumption of gas and electricity of the most recent 3 years and implemented analysis on the usage pattern and standby power of air conditioning and heating by the hour and month using PCCS(Power Consumption Consulting System) as respects electricity that is considered to have a possibility of energy-saving. The result of analysis showed that enormous amount of electric power was used during the night time for freeze protection and burst in winter season and standby power was increased in winter season as a result.

대학건물의 전력소비 특성에 관한 사례분석 (A Case Study of Electric Power Consumption Characteristics in University Building)

  • 이왕제;윤종호;백남춘;신우철
    • 한국태양에너지학회:학술대회논문집
    • /
    • 한국태양에너지학회 2011년도 추계학술발표대회 논문집
    • /
    • pp.282-287
    • /
    • 2011
  • Of school buildings, university building requires various case analysis unlike buildings in the elementary, middle and high schools in accordance with its characteristic for variables such as characteristic of department, construction structure and material, the number of persons admitted and schedule. Through the case research on the 'D' university located in Daejeon, this study made a comparison on the monthly and yearly consumption of gas and electricity of the most recent 3 years and implemented analysis on the usage pattern and standby power of air conditioning and heating by the hour and month using PCCS(Power Consumption Consulting System) as respects electricity that is considered to have a possibility of energy-saving. The result of analysis showed that enormous amount of electric power was used during the night time for freeze protection and burst in winter season and standby power was increased in winter season as a result.

  • PDF

무선 TCP 성능 향상을 위한 SACK-SNOOP 프로토콜 (SACK-SNOOP Protocol for Wireless TCP Performance Improvement)

  • 안치현;김형철;우종정;김장형;이대영;전계석
    • 한국정보통신학회논문지
    • /
    • 제11권2호
    • /
    • pp.392-401
    • /
    • 2007
  • TCP는 무선링크에서 무선망의 특징으로 인한 패킷 손실을 혼잡으로 인식하여 성능저하를 일으킨다. 이를 개선하기 위해 제안된 다양한 무선 TCP 방법 중에서 SNOOP은 무선구간에서 지역적 재전송을 통해 FH에서의 빠른 재전송이나 혼잡제어를 방지함으로써 TCP의 성능을 향상시킨다. 하지만 SNOOP은 무선구간에서 연집오류를 처리하는데 있어서 개선해야 할 부분이 있다. 본 논문에서는 Freeze-TCP의 ZWA 메시지를 이용해서 FH에서 타임아웃이나 혼잡제어 발생을 막고 무선구간에서 손실된 패킷을 재전송하는 시간을 보호하면서 지 역적 연집오류 재전송을 위한 방법으로 SACK-SNOOP을 제안한다. SACK-SNOOP는 기존의 SACK을 개선하여 오류환경에 따라 ACK에 포함될 오류 패킷의 시퀸스 번호의 개수를 줄임으로써 ACK의 생성과 전송, 해석에 따른 처리시간을 향상시켜 무선구간의 지역적 연집오류의 재전송을 위한 충분한 시간을 확보할 수 있다. 또한 재전송시의 오류에 대비해 FH의 지연시간을 연장함으로써 능동적으로 재전송 오류에 대처한다. 제안 방법은 실험을 통해 연집오류에 의한 패킷손실에서 기존의 방법보다 효율성이 향상됨을 검증하였다.

이식형 단백질 전달체로서 메톡시 폴리(에틸렌 글리콜)/폴리카프로락톤 블록 공중합체의 합성 및 알부민의 방출 거동 (Synthesis of Methoxy Poly(ethylene glycol)-b-poly($\varepsilon$-caprolactone) Diblock Copolymers and Release Behavior of Albumin for Implantable Protein Carriers)

  • 서광수;전세강;김문석;조선행;이해방;강길선
    • 폴리머
    • /
    • 제28권3호
    • /
    • pp.232-238
    • /
    • 2004
  • 약물 전달체로서 메톡시 폴리(에틸렌 글리콜) (MPEG, methoxypolyethylene glycol)과 생분해성 폴리에스테르 계열의 카프로탁톤 ($\varepsilon$-CL, $\varepsilon$-caprolactone)으로 구성된 MPEG-PCL 블록 공중합체를 개환중합을 통해 합성하였다. MPEG-PCL의 결정성과 열적특성은 X선 굴절계와 시사주차열량계를 통하여 분석하였다 모델 단백질로서 알부민 (FITC-BSA, albumin bovine-fluorescein isothiocyanate)과 블록 공중합체를 동결 제분 후, 직접압축 성형방법에 의해 웨이퍼를 제조하였다. 알부민의 방출은 pH 7.4 인산염완충액을 사용하여 37$^{\circ}C$에서 14일 동안 관찰하였다. 알부민의 방출양은 형광분광기를 통하여 FITC의 강도에 의해 결정되었다. 웨이퍼의 형태학적 관찰은 디지털 카메라와 전자주사현미경을 통하여 관찰하였다. 알부민의 방출 속도와 초기 burst는 MPEG-PCL 블록 공중합체의 분절 내에서 폴리(에틸렌 글리롤)의 분자량이 증가할수록 또한 폴리카프로락톤의 분자량이 감소할수록 많은 초기방출과 단축된 방출기간을 보였다.

무선 셀에서의 혼잡 발생을 피하는 핸드오프 방안 (A Handoff Mechanism to Avoid Congestion in Wireless Cells)

  • 변해선;이미정
    • 한국정보과학회논문지:정보통신
    • /
    • 제30권5호
    • /
    • pp.595-603
    • /
    • 2003
  • 이동노드에게 지속적인 통신서비스를 제공하기 위해서는 핸드오프 시 발생하는 패킷손실을 최소화하는 것이 매우 중요하다. 핸드오프가 발생했을 때 패킷손실과 이에 따른 TCP 성능 저하를 일으킬 수 있는 요인이 여러 가지가 있는데 그 중 하나가 이동해 간 노드에 의한 무선 셀에서의 혼잡발생이다. 이와 같은 혼잡은 이동하는 노드뿐만 아니라 이동해 간 셀에서 기존에 통신하고 있던 다른 이동노드들의 통신 성능에도 영향을 미친다. 이에 본 논문에서는 계층적 FA(Foreign Agent) 트리 구조를 기반으로 하는 무선 네트워크 도메인 환경에서 노드의 이동으로 인한 무선 셀에서의 혼잡 발생을 피하는 새로운 핸드오프 방안을 제안하고 이를‘패킷잠금제어’라 부르기로 한다. 패킷잠금제어에서는 노드 이동에 따라 트래픽 버스트가 새로운 셀로 한꺼번에 진입하는 것을 막기 위해 무선 네트워크 도메인에서 패킷 전달 경로에 해당하는 계층적 트리 브랜치 상의 FA들이 이동한 노드의 패킷들을 버퍼링 하면서 점진적으로 새로운 셀로 전달하는 패킷의 수를 늘려 가도록 한다. 시뮬레이션 결과, 이동노드가 가용대역폭이 상이한 셀간에 이동 해 나갈 때 제안하는 패킷잠금제어가 기존의 지역적 등록보다 패킷 손실이 낮음을 보일 뿐 아니라 노드가 이동한 셀에서 이미 통신하고 있던 다른 이동노드들의 TCP 처리율도 향상시킴을 볼 수 있었다.

Characterization of starch and gum arabic-maltodextrin microparticles encapsulating acacia tannin extract and evaluation of their potential use in ruminant nutrition

  • Adejoro, Festus A.;Hassen, Abubeker;Thantsha, Mapitsi S.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제32권7호
    • /
    • pp.977-987
    • /
    • 2019
  • Objective: The use of tannin extract and other phytochemicals as dietary additives in ruminants is becoming more popular due to their wide biological actions such as in methane mitigation, bypass of dietary protein, intestinal nematode control, among other uses. Unfortunately, some have strong astringency, low stability and bioavailability, and negatively affecting dry matter intake and digestibility. To circumvent these drawbacks, an effective delivery system may offer a promising approach to administer these extracts to the site where they are required. The objectives of this study were to encapsulate acacia tannin extract (ATE) with native starch and maltodextrin-gum arabic and to test the effect of encapsulation parameters on encapsulation efficiency, yield and morphology of the microparticles obtained as well as the effect on rumen in vitro gas production. Methods: The ATE was encapsulated with the wall materials, and the morphological features of freeze-dried microparticles were evaluated by scanning electron microscopy. The in vitro release pattern of microparticles in acetate buffer, simulating the rumen, and its effect on in vitro gas production was evaluated. Results: The morphological features revealed that maltodextrin/gum-arabic microparticles were irregular shaped, glossy and smaller, compared with those encapsulated with native starch, which were bigger, and more homogenous. Maltodextrin-gum arabic could be used up to 30% loading concentration compared with starch, which could not hold the core material beyond 15% loading capacity. Encapsulation efficiency ranged from $27.7%{\pm}6.4%$ to $48.8%{\pm}5.5%$ in starch and $56.1%{\pm}4.9%$ to $64.8%{\pm}2.8%$ in maltodextrin-gum arabic microparticles. Only a slight reduction in methane emission was recorded in encapsulated microparticles when compared with the samples containing only wall materials. Conclusion: Both encapsulated products exhibited the burst release pattern under the pH conditions and methane reduction associated with tannin was marginal. This is attributable to small loading percentages and therefore, other wall materials or encapsulation methods should be investigated.

패시브 공동주택 계획을 위한 설계 중점항목 및 관련 기준 연구 (A Study of Critical Items and Related Standards on Designing for Passive Apartments)

  • 이명주
    • 대한건축학회논문집:계획계
    • /
    • 제34권7호
    • /
    • pp.21-29
    • /
    • 2018
  • This study aimed to find and suggest the purpose of future plans, critical items on designing and Related standards to amend construction standards for domestic energy saving and environmentally friendly housings. It would also activate and increase the supplies of passive house minimizing the problems on current apartment housings in winter and reducing heating energy which brings fine dust pollution. After defining the standard model of Korean apartment housings(reference model), this study calculated the amount of heating energy demand per unit area annually as applying the yearly changed standards from 2008 to 2017 to existing standard model. It turned out that applying 2017 construction standards of energy saving and eco-friendly housings to reference model has saved up to 75% of heating energy demand comparing to the one applied 2008's. However, it still could not solve the fundamental problems such as winter fungus, condensation, freezing, freeze and burst, and insulation weakness space, and could not be free from fine dust particles. To solve them, this study suggested improved standards adding critical items on design related to outside insulation, cut off the heat-bridge, enforce air-tightness and heat change efficiency on heat recovery ventilator. As a result, it has reduced more than 10% of heat demand from 2017. It would be more than 90% of savings from 2008 if we make the amount of heat loss be zero on heat bridge on designing stage in the future.

알부민을 함유한 메톡시 폴리(에틸렌 글리콜)- 폴리(L-락타이드-co-글리콜라이드) 웨이퍼의 제조 및 방출거동 (Preparation and Release Behavior of Methoxy poly(ethylene glycol)- poly(L-lactide-co-glycolide) Wafer Containing Albumin)

  • 서광수;김문석;김경자;조선행;이해방;강길선
    • 폴리머
    • /
    • 제28권4호
    • /
    • pp.328-334
    • /
    • 2004
  • 단백질 전달체로 이용하기 위한 폴리(에틸렌 글리콜)-폴리(락타이드-co-글리콜라이드) 공중합체는 카비톨 (134 g/mole)과 550, 2000 및 5000g/mole의 각기 다른 분자량을 가진 메톡시 폴리(에틸렌 글리콜)을 개시제로 하여 촉매인 Sn(Oct)$_2$를 사용하여 L-락타이드와 글리콜라이드의 개환중합에 의해 합성되었다. $^1$H-NMR, GPC, 그리고 XRD를 이용하여 합성된 블록 공증합체의 특성을 결정하였다. 이식형 웨이퍼를 준비하기 위하여 동결분쇄기를 이용하여 형광이 결합된 1% 소 혈청 알부민과 고분자를 균일 혼합 후에 3mm${\times}$1mm의 크기로 웨이퍼를 제조하였다. 형광 알부민의 방출 거동과 pH 변화는 pH 7.4의 인산염완충용액을 이용하여 37$^{\circ}C$, 100rpm의 항온조에서 30일 동안 관찰하였다. 알부민의 방출양은 형광분광기를 통하여 FITC의 강도에 의해 결정되었다. 알부민의 방출 거동은 블록 공중합체내에서 MPEG의 분자량이 증가할수록 빠른 초기방출을 보였고, PLGA의 분자량을 조절함으로서 약물의 방출기간을 결정할 수 있었다. 이러한 결과로 생분해성 PLGA에 친수성인 MPEG의 도입을 통해 약물의 방출거동을 조절할 수 있었다.