• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.1
• /
• pp.123-128
• /
• 2006

Enzymatic deinking method can avoids the alkaline environment as usual required in chemical deinking, which consequently cuts chemical costs and reduced the white water pollution. The electrostatic wastepaper was dinked with commercial cellulolytic enzymes and surfactant in neutral pH and the effectiveness of deinking and the physical properties of deinked pulp were evaluated. The disintegrating efficiency of the electrostatic wastepaper in neutral pH was enhanced with enzyme treatments. Although the freeness of deinked pulp with enzymes was higher than that of deinked pulp with chemical deinking agents, the brightness of the enzymatic deinked pulp was slightly lower than that of the chemical deinked pulp. But, by additions of nonionic surfactants, the brightness of deinked pulp was increased with less residual ink particles and mechanical properties of enzymatic deinked pulp was improved compared to the deinked pulp of conventional alkaline method.

• 펄프종이기술
• /
• 제31권2호
• /
• pp.50-57
• /
• 1999

This study was carried out to compare a conventional alkaline flotation deinking conditions with neutral deinking conditions with and without enzyme addition with respect to the ink removal efficiency and theflotation deinking filtrate quality such as chemical oxygen demand, cationic demand, suspended solids. Based on ink removal rate the neutral deinking condition without enzyme was better than the alkaline deinking condition, and the neutral deinking with enzyme addition turned out to be the best. The brightness of the deinked pulp was found to be the same trend as the ink removal rate. Flotation reject rate for the neutral deinking condition without enzyme was higher than that of the alkaline deinking condition, but that of the neutral deinking condition with enzyme was lower than that of the alkaline and the neutral deinking condition without enzyme. On the freeness of the deinked pulp, the neutral deinking condition with enzyme had the highest value and the alkaline deinking condition had the lowest value among the conditions tested. On the filtrate of the flotation stage, the cationic polymer demand of the neutral deinking condition with enzyme was much lower than the other conditions. Suspended solids and chemical exygen demand for the neutral flotation deinking filtrate was lower than those of the alkaline flotation deinking filtrate.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2000년도 추계학술발표논문집
• /
• pp.115-115
• /
• 2000

제지 공정의 효율적인 운영을 위해 공정변수를 확인하는 작업은 매우 중요하다. 탈수 특성 평가를 위하여 SR(Shopper- RegIer)과 CSF(Canadian Standard Freeness tester) 그리고 원형 수초지기 동의 비난류 상태의 자연탈수 특성 평가 장치와 동적 조건의 감압식 탈수성 분석기 퉁이 도입되어 있으나 제지 공정에 보다 더 근접한 탈수, 보류 특성을 평가 하기 위하여 특히 wet-end 첨가제들의 효능을 보다 정확히 분석할 수 있도록 난휴 발생과 감압 탈수 둥을 유도한 탈수 특성 평가 장치 개발의 필요성이 커지고 있다Il, 2) 이미 소개된 RDA-HSF

• 펄프종이기술
• /
• 제39권5호
• /
• pp.12-19
• /
• 2007

Enzymatic deinking method can avoids the alkaline environment as usual required in chemical deinking, which consequently cuts chemical costs and reduced the white water pollution. The electrostatic wastepaper was dinked with commercial cellulolytic enzymes and surfactant in neutral pH and the effectiveness of deinking and the physical properties of deinked pulp were evaluated. The disintegrating efficiency of the electrostatic wastepaper in neutral pH was enhanced with enzyme treatments. Although the freeness of deinked pulp with enzymes was higher than that of deinked pulp with chemical de inking agents, the brightness of the enzymatic deinked pulp was slightly lower than that of the chemical deinked pulp. But, by additions of nonionic surfactants, the brightness of deinked pulp was increased with less residual ink particles and mechanical properties of enzymatic deinked pulp was improved compared to the deinked pulp of conventional alkaline method.

• 한국멀티미디어학회논문지
• /
• 제13권10호
• /
• pp.1557-1564
• /
• 2010

본 연구에서는 아코디언의 연주 과정을 도형화하고 분석하여 연주법에 대한 운용 체계를 패트리 넷으로 제안한다. 특히 아코디언 연주의 객체들을 플레이스와 트랜지션으로 분리하여 연주법을 도식화함으로서 연주 교육을 자동화 할 수 있는 기틀을 제시한다. 여기에서는 아코디언 연주 과정의 가시화와 운지법의 병세화로 순환 멈춤을 없게 하여 유연한 연주를 하는데 그 목적이 있다. 본 논문은 여러 약기들의 연주에도 패트리 넷으로 모델링하여 연주 과정을 이해함으로서 효율적이며 창의적으로 활용할 수 있는 충분한 효과가 있다. 본 연구에서는 패트리 넷을 이용한 아코디언 연주 모텔을 처음으로 제안하여 실제적인 연주 사례를 들어 그 효율성을 검증한다.

• 보존과학회지
• /
• 제5권1호
• /
• pp.94-104
• /
• 1996

This study was carried on paper mulberry bast fibers, which were cut in the length of it's chip by three kinds. And they cooked by sodium hydroxide (NaOH) and ammonium oxalate (AMOX), and pulping process was studied to inquire some properties of hand made papers. The results were as follows. AMOX pulps had $10\~17\%$ higher than NaOH, but amounts of the residual lignin of it's pulps and residual ash were high, and it surely can't be superior. In the freeness of pulps, AMOX pulps were higher than that of NaOH, but they showed tendency to opposite in view of relation of chip's length kinds. For the AMOX pulps, the physical characteristics test results were higher long fiber pulps than short fiber pulps. Specially, in folding endurance long fiber pulps were a very strong. NaOH pulp's physical characteristics test had shown results that were opposite of there of the AMOX pulps, if the length of the fiber is longer, the strengthts generally decreased. To get the optimum fiber's length according to use of paper and pulping method, they must be fractionate chip's length. The long fibers in NaOH pulps affected the paper quality greatly to length of chips.

• 펄프종이기술
• /
• 제47권5호
• /
• pp.104-111
• /
• 2015

Factors influencing penetration of PVAm solution into paper during impregnation were investigated with ultrasonic Penetration Evenness Analyzer (PEA). Paper structure was varied by changing basis weight, freeness of pulp, calendering, and filler addition, and hydrophobicity of paper was varied by adding AKD. In addition, the viscosity of PVAm solution was varied by changing the concentration of PVAm solution. Important factors influencing penetration of PVAm solution into paper were found to be the pore structure and the hydrophobicity of paper, and the viscosity of PVAm solution. Pore structure of paper could be controlled by refining degree and filler addition and hydrophobicity of paper could be controlled by internal sizing. Denser structure of paper, higher hydrophobicity and higher liquid viscosity slowed down the penetration of PVAm solution into paper.

• 펄프종이기술
• /
• 제45권4호
• /
• pp.27-33
• /
• 2013

Manufacturing fabrics from dissolving cellulosic pulp is increasing in these days. For making high quality of cellulose-based fabrics, control of cellulose DP (degree of polymerization), its alpha cellulose content, its brightness, and its crystallinity are important. To process the cellulosic raw material, refining of cellulosic fibers is essential, and it is important to know if refining affects those important cellulose properties. The effects of PFI mill and Valley beater refining on the alpha-cellulose content, cellulose DP, crystallinity, and paper mechanical properties of wood and two different cotton fibers were studied. The results showed that PFI mill refining rarely affected those properties. Fibers refined by a Valley beater displayed a small reduction in fiber length in comparison with those refined by a PFI mill. However, the Valley beater refining method produced almost no changes in cellulose properties, either. The refining process seemed to have very little effect on the cellulose DP, crystallinity index, or alpha-cellulose content until the freeness decreased to around 300 mL CSF for wood and 100 mL CSF for cotton fibers, respectively. There were also no differences in tensile strength development in two refining methods.

• Journal of the Korean Wood Science and Technology
• /
• 제23권2호
• /
• pp.37-46
• /
• 1995

The substitution of carboxymethylated hydroxyl group in pulp revealed more hydrophilic than hydroxyl group. And then fibers were more flexible, swell more which leads to better conformation between fibers in turn this raise paper strength. In this paper, we tried to chemical modifyings of recycled fiber, OCCs(old corrugated containers). Many researchers have examined chemical modification of papermaking fiber by partial carboxymethylation(PCM) using a organic solvent processes. We made modified PCM processes adapted waters m replace of the organic solvent. Our testings for the optimum conditions on the new method, conditions as reaction time, temperature, liquor ratios were designed likely plant system. Freenesses(SR$^{\circ}$) were increased following on carboxyl content of the samples. Handsheets of untreated samples and partial carboxymethylated OCCs were made by optimum conditions on different concentrations of the reagent. As results, maximum 25% strength increasing effects were obtained by the new method.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 Proceedings of Pre-symposium of the 10th ISWPC
• /
• pp.172-177
• /
• 1999

Effect of fiber treatment with cellulase (Liftase A40), and with two refining methods (Valley beating and impact refining) on wood fiber and handsheet properties were investigated at three refining levels (300, 400, and 500ml) for two furnishes (NBKP and LBKP). Part of the treated furnishes were classified by 150 mesh screen into fine-free fiber, and fines. Fiber length analysis, WRV, zero-span strength, and other handsheet mechanical properties were compared. The study showed that Liftase A40 lowered the zero-span and the folding endurance of both furnishes (NBKP much more and LBKP much less). Pretreatment with Liftase A 40 followed by refining significantly lowered the fiber length and refining energy to reach to the target freeness. Impact refining, which is done by hitting the fibers vertically with rod at 20% solid content, kept the fiber length increased WRV, and improved handsheet mechanical properties much more than valley beating. Properties of fines from different sources were compared in detail in the study.