• 한국CDE학회논문집
• /
• 제19권2호
• /
• pp.91-102
• /
• 2014

The outer surface of an irregular structure contains panels with two-directional curvature called NURBS. To construct these forms of exterior materials, complex geometric surface should be divided into forms and sizes that can be manufactured and constructed. Because the bigger the curvatures of these divided exterior panel, the more expensive the construction costs, these complex two-directional curvatures should go through optimal process of reinterpretation to minimize the curved surfaces with complex two-directional curvatures. Yet, to gain higher ground in technological competition in the field of irregular structure construction, companies do not share know-how that they obtained. Accordingly, small construction and design companies have trouble calculating even rough estimate and cannot adjust expected construction cost based on comparison of design alternatives. Given this situation, this study conducted the research that can support decision-making in the design stage of the construction and provide basic material for optimal range to reduce manufacturing cost by the minimizing the distorted plane of the irregular structure.

• Structural Engineering and Mechanics
• /
• 제89권3호
• /
• pp.323-334
• /
• 2024

Physical and chemical factors can cause traditional timber constructions to lose structural integrity. Knowing the dynamic properties of the building components is vital to avoid damage to the buildings from dynamic effects, a subset of physical effects. In this work, spruce and scotch pine wooden beams that had been strengthened in three distinct ways with carbon fiber strengthened polymer (CFRP) were investigated for changes in their dynamic properties. For this, CFRP was used to strengthening unstrengthened wooden beams in the form of bottom confinement, U-shaped confinement, and full confinement after the dynamic parameters of the beams were determined. By using experimental modal analysis with both free-free and fixed-fixed boundary conditions, the beams'initial natural frequencies were identified.

• 건축역사연구
• /
• 제8권4호
• /
• pp.39-62
• /
• 1999

Basic concept of this study is that architectural form as a material at present has meaning for the dweller's life on the past historical plane. Main method to recover history is ethnographic interview to dwellers. Secondary method is to analyze ancestors' writings, buildings in the background of the family photos, and past drawings and then to relate them with architectural form at present. Taxonomy is a starting point: general name of the building by outside researcher is quite different from it by inside dwellers. 'Haengrang-chae', servant quarter, has never been used for servants. Function of the haengrang went outside thatched houses at the front village. Firsthand observation or simple analyses as results of several precedent research are reexamined and criticized through this study. The mansion has moaning when we synthesize with the site location based on farming land and tenant farmer, and decline of the Kyongpo Lake. Territoriality of the mansion is reinterpreted to 'In-Out Structure' by Yin-Yang thinking, Dwellers extend buildings gradually to outside village, surrounding rear hills, the lake, DongHae Sea, and finally goes to imaginative Taoist heaven beyond real nature through the literary life. Confucius principle, known to govern upper class house at Yi Dynasty also affect general composition of the buildings: perpetuation of the family by ancestor worship, elder dominance and male dominance, fraternity love in the extended family, charity display by reception of guests, Taoist scholarly life harmonized with nature. However, the study of the particular life and usage of the dwellers reinforces or corrects general supposition of precedent researches. Unique shape of the house has been formed by convenience of the dwellers' life style, early modernized free thought over the rigid Confucius design principle, and female power in male dominant society.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제24권4호
• /
• pp.59-67
• /
• 2018

Purpose: The concept of the Barrier-Free Design has steadily expanded into a basic principle of design, which can provide safe and convenient lives not only limited to the disables, elders, and pregnant women, but also to all members of the society. This is what we now know as the Universal Design. In other words, Barrier-Free Design for all is Architectural Approach of Universal Design. Thus, as a future-oriented alternative to school facilities according to social change, this study suggests basic direction of school building planning and concept of universal design considering school facilities characteristics. Methods: The characteristics of school facilities are understood from the perspective of Universal Design. In addition, a survey is conducted to identify the current state of school facilities. Result: Findings from this study are as follows. First, Universal Design of School Building is an integrated characteristic. Integration is intended to create and manage an integrated environment instead of an individual and one-time approach to installation and maintenance of convenience facilities. Second, It is a flexible characteristic to be sustainable. In other words, they aim to be selectable to respond to change. Third, It is a characteristic of accumulation of outstanding cases. This means that not only individual schools but also entire school spaces will be applied to Universal Design to form a virtuous circle of environment improvement. Implications: The results of this study may serve as a basic concept in the design of school buildings.

• 한국건축시공학회지
• /
• 제23권3호
• /
• pp.251-260
• /
• 2023

비정형 건축물은 외부면이 다양한 곡선이기 때문에 비정형 거푸집은 맞춤제작되어 사용된다. 비정형 거푸집 제작에 있어 재활용이 가능한 Phase Change Material(PCM)과 곡률구현에 용이한 Ultra-High Performance Concrete(UHPC)가 사용된다. 그러나 PCM은 약 58~64℃가 융점이며, UHPC의 수화열로 PCM 거푸집이 손상될 수 있어 실험을 통해 형상을 확인한다. 실험은 제작한 PCM 거푸집에 Silicone sheet 3mm를 설치한 (A)와 설치하지 않은 (B) 거푸집에 UHPC를 타설한다. 실험결과 (A) 3.793mm, (B) 5.72mm가 측정되었으며, (B) 거푸집이 수화열에 취약한 것으로 분석되었다. 이러한 연구는 초고강도 비정형 패널 및 PCM 거푸집 제작 관련 기초자료로 활용될 것으로 기대된다.

• Structural Engineering and Mechanics
• /
• 제11권4호
• /
• pp.357-372
• /
• 2001

In this paper, cantilevered tall structures are treated as cantilever bars with varying cross-section for the analysis of their free longitudinal (or axial) vibrations. Using appropriate transformations, exact analytical solutions to determine the longitudinal natural frequencies and mode shapes for a one step non-uniform bar are derived by selecting suitable expressions, such as exponential functions, for the distributions of mass and axial stiffness. The frequency equation of a multi-step bar is established using the approach that combines the transfer matrix procedure or the recurrence formula and the closed-form solutions of one step bars, leading to a single frequency equation for any number of steps. The Ritz method is also applied to determine the natural frequencies and mode shapes in the vertical direction for cantilevered tall structures with variably distributed stiffness and mass. The formulae proposed in this paper are simple and convenient for engineering applications. Numerical example shows that the fundamental longitudinal natural frequency and mode shape of a 27-storey building determined by the proposed methods are in good agreement with the corresponding measured data. It is also shown that the selected expressions are suitable for describing the distributions of axial stiffness and mass of typical tall buildings.

• 한국공간구조학회논문집
• /
• 제23권3호
• /
• pp.71-78
• /
• 2023

Recently, Free-Form and Irregular Shape high-rise buildings are constructed by IT technology development. Tilted shaped high-rise building which is one of Irregular shape high-rise buildings can cause lateral displacement by gravity load and lateral load due to tilted elevation shape. Therefore, it is necessary to review the behavior and structural aspects of the Tilted shape high-rise building by gravity load. In this paper, the dynamic characteristics of a tilted structure with a dual-core were analyzed with the core location as a design variable, and response behavior, vulnerable members, and vulnerable layers to earthquake loads were analyzed. As a result of the analysis, as the location of the core moved in an tilted direction, the eccentric distance and eccentric load decreased, reducing the axial force of the vertical members. However, the location of the core had little effect on the response.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.154-155
• /
• 2021

Appearance finish is important for amorphous buildings to maximize amorphousness, and GFRC, glass, and metal are mostly used as exterior materials for amorphous buildings currently applied. However, the existing exterior materials showed limitations in amorphous expression, texture, and color expression. In this study, a 3D stereoscopic panel mold was manufactured using the FDM method, one of the 3D printing technologies, and 3D stereoscopic panel production was reviewed using Ultra High Performance Concrete (UHPC), which has excellent physical and mechanical performance and expression. In order to overcome the limitations of unstructured expression, a UHPC 3D stereoscopic panel using the FDM method, one of the 3D printing technologies, was manufactured. Unlike steel molds, FRP molds, and EPS molds, the FDM method can be applied to various materials, and complex shapes are implemented. If it is used using recyclable materials as well as PLA filaments used in the FDM method, it will overcome the limitations of amorphous expression and activate the production of 3D stereoscopic panels that have secured eco-friendliness.

• 건축역사연구
• /
• 제4권1호
• /
• pp.43-70
• /
• 1995

This paper aims to clarify the historical background and the architectural purpose of the buildings in NakSunJae area to the original state. Through the investigation, the clarified facts are as follows. 1. The relation with the buildings for the Crown Prince in the ChangDok Palace By constructing buildings in the NakSunJae area, the spatial conception of the Royal Palace was changed, that is, buildings for the Crown Prince in the ChangDok Palace disappeared and they became to belong to the ChangGyeong Palace. Moreover, by constructing the NakSunJae and its attached buildings, the area for the Crown Prince shifted to use as a private area for the king. 2. The date and the purpose of the construction The NakSunJae area is consisted of three compounds of building: NakSunJae, SukBokHun and SooKangJae. The NakSunJae was constructed for the king HunChong's private occupancy in 1847 and the SukBokHun for a residence of a royal concubine Kim, in 1847. The SooKangJae was originally built in 1785 in the SooKang Palace where the ex-king took up as his residence after abdicate the throne. Later on, it was repaired as the residence of the Queen SoonWon, king HunChong's grandmother, in commemoration for the 60th anniversary of her birth in 1848. 3. Architectural features of the NakSunJae area at the time of construction First, as the NakSunJae area is surrounded by quite high hills in northeast and by low hills in southwest, it is naturally distinguished from its surroundings and gives a cosy feeling. Second, the NakSunJae area shows very untrammeled style of arrangement in general, because it was constructed as a private occupancy for the king. other buildings are arranged in the latticing orderly, nonetheless, they are free by themselves from a strict form and make themselves an area full of variety. Third, the buildings in the NakSunJae area have a characteristic of naivety of common people's houses, because they were not an official but private place for the king, his concubine and his grandmother. Forth, the ornaments in the NakSunJae area are variously, elegantly and harmoniously patterned with the meaning of good luck. Fifth, back garden in the NakSunJae area was made by taking advantage of sloping hills. The back garden is beautifully configurated by arranging various constituent elements of pavilions, tiered flower beds, chimneys, decorated walls, small doors between walls, stoneworks and trees.

• 한국실내디자인학회논문집
• /
• 제26권6호
• /
• pp.163-171
• /
• 2017

Brick is not only aesthetically beautiful and emotional material, but also eco-friendly and good building commodity for human health. Nonetheless, the use of brick has declined, due to the difficulty of building high-rise buildings and the limitation of the free form implementation. However, modern society is increasingly interested in environmentally friendly finishing materials for solving environmental problems. From this point of view, the brick architecture is being reexamined as a material to improve the living environment and to provide comfort without destroying nature. In addition, the development of digital technology enables the implementation of various types of masonry method and curved forms. Parametric design is one of the ways to realize the curved forms and various architectural expressions for brick architecture. In this background, the purpose of this study is to develop algorithms that can easily generate curved brick walls through parametric design, enable various pattern designs, and respond to real-time feedback. The details of the study are as follows. First of all, we examine organic architecture, the trend of brick architecture, and the concept of parametric design. Secondly, In order to generate curved surface with complex curvature, major planning factors affecting form generation are examined. Finally, we develop a parametric design method that consists of generating a curved surface for brick arrangement, implementing a parametric algorithm, and generating a curved form using bricks. Consequentially, we propose an algorithm that can maximize the use of ready-made bricks without using cut bricks to design curved walls and present efficient and economical design alternatives.