• 한국BIM학회 논문집
• /
• 제5권4호
• /
• pp.53-62
• /
• 2015

Korea has been at the forefront of green growth initiatives. In 2008, the government declared the new vision toward 'low-carbon society and green growth'. The government subsidies and Feed-in Tariff (FIT) increased domestic usage of solar power by supplying photovoltaic housing and photovoltaic generation systems. Since 2000, solar power industry has been the world's fastest growing source with the annual growth rate of 52.5%. Especially, BIPV(Building Integrated Photovoltaic) systems are capturing a growing portion of the renewable energy market due to several reasons. BIPV consists of photovoltaic cells and modules integrated into the building envelope such as a roof or facades. By avoiding the cost of conventional materials, the incremental cost of photovoltaics is reduced and its life-cycle cost is improved. When it comes to atypical building, numerous problems occur because PV modules are flat, stationary, and have its orientation determined by building surface. However, previous studies mainly focused on improving installations of solar PV technologies on ground and rooftop photovoltaic array and developing prediction model to estimate the amount of produced electricity. Consequently, this paper discusses the problem during a planning and design stage of BIPV systems and suggests the method to select optimal design of the systems by applying the national strategy and economic policies. Furthermore, the paper aims to develop BIM tool based on the engineering knowledge from experts in order for non-specialists to design photovoltaic generation systems easily.

• 한국BIM학회 논문집
• /
• 제12권4호
• /
• pp.19-31
• /
• 2022

With the development of 3D-based CAD (Computer Aided Design), attempts at freeform building design have expanded to small and medium-sized buildings in Korea. However, a standardized system for continuous utilization of shape data and BIM conversion process implemented with 3D-based NURBS is still immature. Without accurate review and management throughout the Freeform building project, interference between members occurs and the cost of the project increases. This is very detrimental to the project. To solve this problem, we proposed a continuous utilization process of 3D shape information based on BIM parameters. Our process includes algorithms such as Auto Split, Panel Optimization, Excel extraction based on shape information, BIM modeling through Adaptive Component, and BIM model utilization method using ID Code. The optimal cutting reference point was calculated and the optimal material specification was derived using the Panel Optimization algorithm. With the Adaptive Component design methodology, a BIM model conforming to the standard cross-section details and specifications was uniformly established. The automatic BIM conversion algorithm of shape data through Excel extraction created a BIM model without omission of data based on the optimized panel cutting reference point and cutting line. Finally, we analyzed how to use the BIM model built for automatic conversion. As a result of the analysis, in addition to the BIM utilization plan in the general construction stage such as visualization, interference review, quantity calculation, and construction simulation, an individual management plan for the unit panel was derived through ID data input. This study suggested an improvement process by linking the existing research on atypical panel optimization and the study of parameter-based BIM information management method. And it showed that it can solve the problems of existing Freeform building project.

• 한국실내디자인학회논문집
• /
• 제41호
• /
• pp.88-95
• /
• 2003

The paradigm of contemporary times became different from paradigm of modem times. The change of paradigm is caused by the side effect of paradigm of pre-times. It could be said that contemporary paradigm is pluralism. In the forms of contemporary building and interior design, the informal form is the result of pluralism. This study is researching and analyzing the informal design tendency in the interior space composition of contemporary architecture. the 1950's free form movement, 1960's Informal movement and pluralism after 1970's affected the latest informal forms. The tendencies of contemporary informal design are organic-degital tendency and deconstructive tendency. Along this two kinds of tendencies, I studied the specific characters in expression and analyzed some natural-degital, deconstructive building.

• 대한건축학회논문집:계획계
• /
• 제35권9호
• /
• pp.89-99
• /
• 2019

In the representation of buildings with continuous changes in the curved shape of the surface, countless plans or sections are required, or none of the traditional drawings can explain the geometry of it. In other words, in no case can an ordinary drawing achieve the efficient and clear communication capability which is inherent function of the drawings. As a result, the current architects are introducing their own way of drawing technique which is developed in accordance with a specific curved shape, construction method or company resources, but this is not what can be applied to other cases because it has not been ever shared or agreed in the industry. In this process, the drawing or construction of curved building has been recognized as the exclusive property of a specific expert, or the design and construction without the in-depth understanding of the technology have resulted in the appearance of poor buildings. Therefore, this study aims to present an elements and method that can convey shape information more effectively and clearly in the drawing representation of non-linear buildings and, thus, contributes to lowering the barriers to entry into the field by providing the information to be easily applied to related projects. In order to attain this goal, the drawings of recently completed projects of free form building are analyzed to reveal the method used to effectively express the shape information of the building and to derive new drawing elements that have not been applied to the existing drawings.

• 대한기계학회논문집A
• /
• 제33권11호
• /
• pp.1262-1266
• /
• 2009

The slab(flat) truss plate used for building construction is analyzed for vibration and noise. Using floor impact test and numerical method (FEM), both net form and traditional form are compared for vibration and noise. The results show that the frequencies of a net form are lower than those of a traditional form in the case of free vibration, and the noise values of a net form are lower than those of a traditional form for the range from 500 Hz to 2000 Hz.

• 한국건설관리학회논문집
• /
• 제12권3호
• /
• pp.11-21
• /
• 2011

비정형 건축물은 건축가의 디자인 의도를 반영한 다양한 형태의 외장 디자인을 포함한다. 이러한 비정형 형태의 외장부재는 NURBS (Non-Uniform Rational B-Spline) 라 불리는 이 방향 곡률로 구성된 불규칙한 자유곡선면을 포함하고 있어 실제 외장부재의 생산 및 시공을 위해서는 3차원 비정형 BIM 기술을 적용한 패널최적화 단계를 거쳐야 한다. 본 연구에서는 역공학(Reverse Engineering) 기법을 근간으로 사례연구를 통해 비정형 건축물 BIM 도구인 디지털 프로젝트를 활용하여 패널형태를 구축하고 패널 최적화 결과를 도출한다. 최적화 결과 도출된 비정형 패널부재의 곡률 형상에 따른 Mock-Up 패널제작을 통해 패널종류에 따른 제작 용이성을 테스트하고 레이저 스케닝 기술을 사용하여 설계한 패널과 생산된 패널과의 데이터를 비교함으로써 이방향 곡률 곡면부재의 제작정밀도를 분석한다. Mock-Up 부재 제작 시 전문가 인터뷰를 통하여 국내에서 수행되고 있는 현행 비정형 외장부재 생산방식의 문제점을 도출하고 개선방안을 제시한다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.181-182
• /
• 2015

The production technologies of free-form concrete panels are emerging to satisfy the need of modern complex shaped in architectural design. This study aims for introducing and improvising the innovative technique called Rod type mold that overcomes the difficulties in some extent by enabling the mold to be used many times, making the shape of the mold adjustable in a flexible way and describing its production process to provide the alternative solution for the construction of free-form mold with considering the features including reusability and optimization cost across its production process. In this study, the freeform concrete panel shape was designed and experiment was done using computerized numeric control machine and rod type mold. The problems appeared on achieving desired shape while operating on rod type mold. The process of identifying all the root causes and contributing causes that may have generated an undesirable condition were done. Consequently, the conical or semicircular shaped was proposed for the end of Numerical control rod and replaced it with the existing flat shaped end to avoid the detachable problem and to improve rod type mold performance.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.272-273
• /
• 2014

Existing the free-form concrete segments (FCS) mold is produced by state of solid such as steel, wood, Styrofoam that can not be recycled. Using FCS mold result in delay on schedule and decrease of productivity because it consists of irregular curved variety and it requires more time than fixed mold. Thus, FCS mold should be developed which can reduce the costs and also it can be used as semipermanent. The aim of this study is to suggest of flexible mold production process for using the phase change materials(PCM). PCM is maintain that its solid state at low temperature but it changes phase to liquid state by heating. PCM is suitable material for flexible mold due to change of phase in relatively high temperature compare to other phase change materials such as water. Flexible mold is possible that reuse semi-permanently made by PCM. Thus, this study is proposed the process of flexible mold production for using the PCM. The study results will be used as the basic theory for studies on production and installation of FCS.

• Interaction and multiscale mechanics
• /
• 제3권2호
• /
• pp.123-143
• /
• 2010

The essential idea of the element-free Galerkin method (EFG) is that moving least-squares (MLS) approximation are used for the trial and test functions with the variational principle (weak form). By using the weighted orthogonal basis function to construct the MLS interpolants, we derive the formulae for an improved element-free Galerkin (IEFG) method for solving three-dimensional problems in linear elasticity. There are fewer coefficients in improved moving least-squares (IMLS) approximation than in MLS approximation. Also fewer nodes are selected in the entire domain with the IEFG method than is the case with the conventional EFG method. In this paper, we selected a few example problems to demonstrate the applicability of the method.

• 한국건축시공학회지
• /
• 제18권4호
• /
• pp.321-327
• /
• 2018

본 논문은 한국 철강 생산업체에서 발생되고 있는 ERS의 free CaO를Ethylene glycol법을 이용하여 정량 평가하였다. ERS 생산업체 2곳을 선정하여 ERS의 물리적 특성 및 화학성분 분석을 비교하였으며, Ethylene glycol법을 이용하여 생산업체별, 입경 차이(size), 야적 위치(IN, OUT), 에이징 기간(1day, 7days, 14days, 21days, 28days)에 따른 분류로 free CaO 정량 평가를 진행하였다. 본 연구의 실험결과 ERS의 생산업체별 화학 성분이 일부 차이를 나타내고 있었으며, 야적 위치별, 입경, 에이징 기간에 따른 free CaO의 함량 차이가 나타남을 확인하였다. 이는 free CaO가 비정질 물질로서 에이징 기간이 증가하여도 결정화 되지 못한 것으로 사료된다.