• Nuclear Engineering and Technology
• /
• 제51권4호
• /
• pp.1142-1153
• /
• 2019

This paper presents the effect of fusion procedure on the fusion performance of the thermal butt fusion in the safety class III buried HDPE piping per various tests performed, including high speed tensile impact, free bend, blunt notched tensile, notched creep, and PENT tests. The suitability of fusion joints and qualification procedures was evaluated by comparing test results from the base material and buttfusion joints. From the notched tensile test result, it was found that the fused joints have much lower toughness than the base material. It was also identified that the notched tensile test is more desirable than the high speed tensile impact and free bend tests presented in the ASME Code Case N-755-3 as a fusion qualification test method. In addition, with regard to the single low-pressure fusion joint performances, the procedure given by the ISO 21307 was determined to be better that the one specified in the Code Case N-755-3.

• 한국주조공학회지
• /
• 제6권1호
• /
• pp.27-35
• /
• 1986

The gating design of gray cast iron was programmed in a Personal computer. By this program, casting test was done. The results obtained are as follows. 1. Gating design that can calculate the velocity of metal flow and size in each gate section by knowing the loss coefficient caused by friction loss and bend loss was programmed. 2. In the test casting, the gating ratio was changed into 1.1:1.3:1, 1:2:2, 1:4:4. And sound casting, free of sand washing defect, was obtained at the velocity of 35.5cm/sec in ingate.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 춘계학술발표대회 논문집
• /
• pp.13-18
• /
• 2001

This paper deals with finite element analysis for free vibration and forced sine vibration of Ka- and Ku- bend antenna structures using MSC/PATRAN/NASTRAN. The structures are designed to satisfy minimum resonance frequency requirement in order to decouple the dynamic interaction of the satellite with the spacecraft bus structure. From the forced sinusoidal vibration, we have observed output acceleration versus input in X-,Y- and Z- direction, based on base excitation using large mass method. The results of finite elements analysis can be used as the reference data for the experimental test of satellite antenna, resulting in the reduction of cost and time by predicting and complementing experimental data.

• 국제물리치료학회지
• /
• 제7권2호
• /
• pp.1051-1055
• /
• 2016

The purpose of this study was to investigate the effect of the screen size of smart devices on the bending angle of the cervical spine. The subjects of this study were 30 healthy adults(15 men and 15 women) who used smartphones and tablet PC(personal computer). The changes in the bending angle of the upper and lower cervical spine were measured in the subjects after they had used a smartphone and a tablet PC for 300 seconds each. To make sure that all subjects began in the same starting position, an angle-measuring instrument was used to set the angles of the ankle, knee, hip, and arm joints to 90 degree. The subjects were asked to keep the trunk straight. They were asked to hold a smartphone in their hand and to bend their neck so that they could look down at the screen. Once they began using the smartphone in this manner, they were free to change their posture. We used a paired t-test to compare the bending angle of the cervical spine on subjects who used smartphones and tablet PC in the long-term and short-term there production error of cervical and the significance level was cervical. The results showed that, when using a smartphone and a tablet PC for 300 seconds, there was no significant difference in the bending angle of the upper cervical spine(p>.05), although there was a significant difference in the bending angle of the lower cervical spine(p<.05).

• Corrosion Science and Technology
• /
• 제14권3호
• /
• pp.120-126
• /
• 2015

The usage of bending products recently have increased since many industries such as automobile, aerospace, shipbuilding, and chemical plants need the application of pipings. Bending process is one of the inevitable steps to fabricate the facilities. Induction heat bending is composed of compressive bending process by local heating and cooling. This work focused on the effect of induction heat bending process on the properties of ASME SA312 Gr. TP304 stainless steel pipes. Tests were performed for base metal and bended area including extrados, intrados, crown up, and down parts. Microstructure was analyzed using an optical microscope and SEM. In order to determine intergranular corrosion resistance, Double Loop Electrochemical Potentiokinetic Reactivation (DL-EPR) test and ASTM A262 practice A and C tests were done. Every specimen revealed non-metallic inclusion free under the criteria of 1.5i of the standard and the induction heat bending process did not affect the non-metallic inclusion in the alloys. Also, all the bended specimens had finer grain size than ASTM grain size number 5 corresponding to the grain sizes of the base metal and thus the grain size of the pipe bended by induction heat bending process is acceptable. Hardness of transition start, bend, and transition end areas of ASME SA312 TP304 stainless steel was a little higher than that of base metal. Intergranular corrosion behavior was determined by ASTM A262 practice A and C and DL-EPR test, and respectively step structure, corrosion rate under 0.3 mm/y, and Degree of Sensitization (DOS) of 0.001~0.075% were obtained. That is, the induction heat bending process didn't affect the intergranular corrosion behavior of ASME SA312 TP304 stainless steel.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권5호
• /
• pp.82-90
• /
• 2018

원자력 발전소에는 No.36(D36)이상의 대구경 철근이 사용되는데 이러한 대구경 철근으로 갈고리 정착을 할 경우, 기준에서 요구하는 구부림 및 갈고리 길이로 인해 설계 및 배근에 있어 큰 어려움을 겪을 수 있다. 이러한 문제를 해결하기 위한 방안으로 확대머리 철근을 사용할 수 있다. 2008년 개정된 ACI 318에서는 확대머리철근의 정착길이식을 도입하였으며, 제정 배경 연구를 근거로 하여 횡보강근의 영향력을 무시하고 있다. 그러나 확대머리 철근이 겹침이음이나 컷오프 구간에서 사용될 경우, 인장재에 의해 피복 콘크리트를 밀어내는 힘이 발생하여 횡보강근에 작용하는 인장력이 크게 증가한다. 본 연구의 목적은 휨을 받는 부재 내에 정착된 확대머리 철근의 정착성능에 대한 횡보강근의 영향력을 평가하는 것으로, 이를 위해 횡보강근의 간격을 변수로 한 대구경 확대머리 철근의 정착실험을 수행하였다. 실험방법으로는 컷오프 구간을 모사한 실험을 수행하였으며, 확대머리 철근으로는 D43의 대구경 철근을 사용하였다. 실험 결과, 횡보강근이 없는 실험체의 경우 정착구간의 쪼갬파괴에 이어 단부의 하중이 확대머리 부근의 콘크리트에 직접적으로 작용하면서 상부 피복 콘크리트가 부재에서 탈락하는 취성적인 파괴형태가 나타났다. 또한 확대머리 철근의 발현강도가 항복강도의 절반밖에 못 미치는 매우 낮은 내력을 보였다. 이에 반해 횡보강근이 배근된 실험체의 경우 경우 횡보강근이 실험체 단부의 하중에 직접적으로 저항함에 따라 실험체 내력이 큰 폭으로 상승하였다.