• Journal of Photoscience
• /
• 제5권1호
• /
• pp.33-37
• /
• 1998

One macroscopic effect in the free-running Er:YAG laser is an accumulation of microscopic effects. Understanding of the exogenous water induced mechanical effect on the dental hard tissue by the Qswitched Er:YAG laser has an important impact on the further understanding of the free-running Er:YAG laser ablation on the dental hard tissue. The Q-switched Er:YAG laser (1-$\mu$s-long pulse width) was used in the recoil pressure measurement with an aid of water-jet system and a pressure transducer. The amplitude of the recoil pressure depends on the tooth surface conditions (dry and wet) and the volume of the water upon it. Wet surfaces yielded higher recoil pressure than that of dry, surface, and as the volume of the exogenous water drop increased, the amplitude of the recoil pressure increased also.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표대회 논문집(III)
• /
• pp.883-887
• /
• 1998

Hydration is the main reason for the growth of the material properties. A exact parameter to control the chemical and physical process is not the time, but the degree of hydration. Therefore, it is reasonable that development all material properties should be formulated in terms of degree of hydration. Mathematical formulation of degree of hydration is based on combination of reaction rate functions. The effect of moisture conditions as well as temperature on the rate of reaction is considered in the degree of hydration model. This effect is subdivided into two contributions: water shortage and water distribution. The former is associated with the effect of on the progress of hydration. The water needed for progress of hydration do not exist and there is not enough space for the reaction products to form. The latter is associated with the effect of free capillary water distribution in the pore system. Physically absorption layer does not contribute to progress of hydration and only free water is available for further hydration.

• International Journal of Fluid Machinery and Systems
• /
• 제3권4호
• /
• pp.285-291
• /
• 2010

To provide required flow rates of cooling or circulating water properly, approach flow conditions of vertical pump systems should be in compliance with state of the art acceptance criteria. The direct inflow should be vortex free, with low pre-rotation and symmetric velocity distribution. Physical model investigations are common practice and the best tool of prediction to evaluate, to optimize and to document flow conditions inside intake structures for vertical pumping systems. Optimization steps should be accomplished with respect to installation costs and complexity on site. The report shows evaluation of various approach flow conditions inside a compact waste water pumping station. The focus is on the occurrence of free surface vortices and the evaluation of air entrainment for various water level and flow rates. The presentation of the results includes the description of the investigated intake structure, occurring flow problems and final recommendations.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권2호
• /
• pp.219-235
• /
• 2014

With the development of the technology of underwater moving bodies, the need for developing the knowledge of surface effect interaction of free surface and underwater moving bodies is increased. Hence, the two-phase flow is a subject which is interesting for many researchers all around the world. In this paper, the non-linear free surface deformations which occur during the water-exit of a circular cylinder due to its buoyancy are solved using finite volume discretization based code, and using Volume of Fluid (VOF) scheme for solving two phase flow. Dynamic mesh model is used to simulate dynamic motion of the cylinder. In addition, the effect of cylinder mass in presence of an external force is studied. Moreover, the oblique exit and entry of a circular cylinder with two exit angles is simulated. At last, water-exit of a circular cylinder in six degrees of freedom is simulated in 3D using parallel processing. The simulation errors of present work (using VOF method) for maximum velocity and height of a circular cylinder are less than the corresponding errors of level set method reported by previous researchers. Oblique exit shows interesting results; formation of waves caused by exit of the cylinder, wave motion in horizontal direction and the air trapped between the waves are observable. In 3D simulation the visualization of water motion on the top surface of the cylinder and the free surface breaking on the front and back faces of the 3D cylinder at the exit phase are observed which cannot be seen in 2D simulation. Comparing the results, 3D simulation shows better agreement with experimental data, specially in the maximum height position of the cylinder.

• 대한화학회지
• /
• 제36권5호
• /
• pp.632-637
• /
• 1992

물-아세틸아세톤 용매계에서 과염소산나트륨과 과염소산구리의 표준이동 자유에너지는 갈바니전지의 기전력을 측정하여 구하였으며, 이 용매계에서 나트륨이온과 구리이온의 표준이동 자유에너지는 extrathermodynamic procedure로서 테트라페닐붕산 테트라부틸암모늄 가정을 써서 계산하였다. 물로부터 아세틸아세톤 용매로 나트륨이온과 구리이온이 이동할 때의 표준자유에너지값은 25${\circ}C$에서 각각 5.09 및 4.16 kcal/mol이었다. 이 값은 아세틸아세톤이 물보다 나트륨이온과 구리이온에 대하여 약한 donor solvent임을 뜻한다. 물로부터 소량의 아세틸아세톤을 포함하는 혼합용매로 구리이온이 이동할 때의 표준자유에너지값은 이상하게 (-)값을 나타내는데, 이것은 아세틸아세톤이 구리이온과 반응하여 킬레이트를 생성하는 효과 때문이다.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2003년도 춘계 학술발표회 논문집
• /
• pp.431-435
• /
• 2003

Because the Tissue Bound Tritium of food irradiates the organic tissues of a man during a longer time than the Tissue Free Water Tritium, we found the ratio of labile and bound hydrogen, which is the direct source of TBT concentration, in grain such as rice and barley. Tissue free water was extracted from rice and barley sampled, adjacent to Wolsung nuclear power plants of CANDU type, by freeze-drying. Tissue bound water was taken from some of the dried samples by high-pressure combustion. The other of the samples was washed by tritium-free water for 2-3 hours, and dried again by freeze-drying. Tissue bound water was taken again from some of the second dried samples by the combustion. The extracted tissue free and bound waters were distilled and TFWT and TBT concentrations of them were counted by a liquid scintillation counter. Through alternating washing, drying and combustion until the concentration of TBT would be constant, the tritium concentration existing as bound hydrogen was found. The ratios of labile and bound hydrogen of rice and barley were determined by TR concentration, initial TBT concentration and bound tritium concentration. The ratios of bound hydrogen of rice and barley were 0.55, 0.60 relatively.

• 자원리싸이클링
• /
• 제7권4호
• /
• pp.35-42
• /
• 1998

오늘날 전자부품 산업에 실장기술은 크게 각광을 받고 있다. 페라이트 칩인덕터와 같이 전자부품의 소형화를 위해서는, 쉬트 적층법이나 스크린 인쇄법 등을 위하여 유기용매를 사용하는 세라믹 습식공정이 널리 사용되고 있다. 본연구에서는 물이 혼합된 용매계를 이용한 NiCuZn Ferrite(NCZF) 슬러리와 그린쉬트의 제조 및 평가에 관한 연구를 하였다. 볼밀링에 의하여 21 vol%의 NCZF 슬러리를 제조하였으며, polacrylic vinyl copolymer를 바인더로서 사용하였다. 용매로서는 isopropyl alcohol과 2-butoxy ethanol에 40∼80% 물을 혼합하여 사용하였다. 그 결과, NCZF 슬러리의 분산안정성은 입자의 정전기적 힘보다는 free polymer에 의해 나타났으며, 슬러리의 점성은 용매중의 물함량에 크게 의존하였다.

• Journal of Periodontal and Implant Science
• /
• 제53권1호
• /
• pp.85-95
• /
• 2023

Purpose: In recent years, guided implant surgery has been widely used for the convenience of patients and surgeons. Further streamlining the surgical procedure would make implant surgery more convenient. Low-speed water-free conditions are often used in guided implant surgery. Therefore, in this study, we attempted to confirm once again whether drilling was safe at a low speed without water. The main purpose of this study was to evaluate whether a simplified drilling protocol that omits some intermediate steps in the drilling process was safe from the viewpoint of heat generation. Methods: D1 density artificial bone blocks were drilled under 50 rpm, 10 N·cm water-free conditions, and the surface temperature was measured using a digital infrared camera. First, drilling was performed with the sequential drilling method, which is the most widely used technique. Second, for each drill diameter, the temperature change was measured while performing simplified drilling with omission of the previous 1, 2, or 3 steps. Results: In sequential drilling, the heat generated during drilling at all diameters was less than the critical temperature of osteonecrosis (47℃) except for the ⌀2 drill. Statistical significance was observed in all groups when comparing sequential and simplified drilling in the ⌀3.2, ⌀3.8, and ⌀4.3 drills (P<0.001). However, in the simplified drilling procedures, the temperature was below the osteonecrosis threshold temperature (47℃) except for the ⌀4.3 drill with the omission of the previous 3 steps (⌀3.0, ⌀3.2, and ⌀3.8). Conclusions: In general, drilling under low-speed, water-free conditions has shown stable results in terms of heat generation. Simplified drilling showed statistically significantly greater heat generation than sequential drilling. However, most of the diameters and omitted steps seem to be clinically acceptable, so it will be useful if an appropriate selection is made according to the patient's clinical condition.

• 한국해양공학회지
• /
• 제34권1호
• /
• pp.1-12
• /
• 2020

Although there are many kinds of advanced ballast water management systems, pioneering studies for ballast-water free ship and minimal ballast water ship concepts are in progress. In this study, the existing alternatives of ballast water are reviewed and a new design concept is studied on the basis of the existing bulk carrier hull form. To develop a new design alternative which has minimal ballast for ballast water discharge free operation, the new concept should have technical feasibilities that are related to the role of the ballast water, berth access, loading constraints, etc. For this purpose, a simplified systems engineering basis design approach is adopted using a business model as the system analysis and control tool. To check the performance feasibility of the new concept, ship resistance performance is reviewed based on a model scale ship resistance performance analysis.

• 한국환경보건학회지
• /
• 제25권3호
• /
• pp.77-82
• /
• 1999

This study was carried to investigate the characteristics of chloramination as a disinfection in drinking water distribution system. The raw water comes from midstream of Han river. In the range of pH 6~8, preformed chloramine of $Cl_2/NH_3-N$ ratio 5:1 had the HPC inactivation of more than 99% with lower pH and shorter contact time and available chloramine residual was decreased a little. In the chloramines of $Cl_2/NH_3-N$ ratio 3:1~5:1, the higher $Cl_2/NH_3-N$ ratio, the much inactivation of HPC was increased, but as contact time was longer, HPC inactivation of $Cl_2/NH_3-N$ ratio 3:1~5:1 were equaled. Bactericidal activity of three chlorine and postammoniation was influenced by free available chlorine completely and that of preammoniation was as follows : free chlorine ${\fallingdotseq}$ postammoniation>preammoniation>preformed chloramine.