• The Journal of the Acoustical Society of Korea
• /
• v.29 no.4
• /
• pp.270-277
• /
• 2010

In this paper, we proposed an algorithm that improves tone quality of noisy audio signals by using ICA(Independent Component Analysis) algorithm and perceptual filters. Many algorithms have been proposed to eliminate the noise from the audio signals, such as spectral subtraction method, perceptual filter, etc. The perceptual filter uses a noise that is acquired from silent ranges in the input signal. In this case, the improvement rate of tone quality decreases if the noise energy is changed by the environmental variation in a signal frame. But the proposed method estimates a noise that is changed at each frame using ICA algorithm. The estimated noise is applied to perceptual filter. To show the performance of the proposed algorithm, several tests are performed to various input signals. With the proposed algorithm, we could confirm the enhancement of tone quality in terms of segmental SNR (SSNR), noise-to-mask ratio (NMR) and Degradation Category Rating (DCR) test.

• Journal of Korea Multimedia Society
• /
• v.7 no.7
• /
• pp.896-904
• /
• 2004

In this paper, We present an efficient variable rate speech coder for spectral efficiency and packet processing technique for packet loss compensation of a voice codec with 10msec frame in VoIP service. Through disconnecting the users from the spectral resource during silence interval of about 60% period, a variable rate voice coder based on a voice activity detection(VAD) can increase spectral gain by two times. The performance of the method was analyzed by variation of detected voice activity factor and degraded speech frame ratio under various background noise level, and compared those of G.729B of ITU-T 8kbps standard speech codec. A method to compensate lost packets utilized addition of recovery data to a main stream and error concealment scheme for speech quality enhancement, the performance is verified by reconstructed speech quality. The proposed scheme can achieve spectral gain by two times or enhance speech quality by 3dB through reserved bandwidth of VAD. Therefore, the proposed method can enhance a spectral efficiency or speech quality of VoIP.

• Journal of Biomedical Engineering Research
• /
• v.34 no.3
• /
• pp.135-140
• /
• 2013

We have developed an ultra wide-field of view Optical Coherence Tomography(OCT) which has capability to 2D and 3D views of cross-sectional structure of in vivo human retina. Conventional OCT has a limitation in visualizing the entire retina due to a reduced field of view. We designed an optical setup to significantly improve the lateral scanning range to be more than 20 mm. The entire human retinal structure in 2D and 3D was reported in this paper with the developed OCT system. Also, we empirically searched an optimized image size for real time visualization by analyzing variation of the frame rate with different lateral scan points. The size was concluded to be $1024{\times}2000{\times}300$ pixels which took 9 seconds for visualization.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.772-777
• /
• 2006

An acoustic finite element model of a bridge is developed to evaluate the noise generated by the traffic-induced vibration of the bridge. The dynamic response of a multi-girder bridge, modeled by a 3-dimensional frame element model, is analyzed with a 3-axle(8DOF) truck model and a 5-axle(l3DOF) semi-trailer. The flat plate element is used to analyze the acoustic pressure due to the fluid-structure interactions between the vibrating surface and contiguous acoustic fluid medium. The radiation fields of noise with a specified distribution of vibrating velocity and pressure on the structural surface are also computed using the Kirchhoff-Helmholtz integral. In an attempt to illustrate the influence of the structural vibration noise of a bridge to total noise level around the bridge, the random function is used to generate the vehicle noise source including the engine noise and the rolling noise interacting between the road and tire. Among the diverse parameters affecting the dynamic response of bridge, the vehicle velocity, the vehicle weight, the spatial distribution of the road surface roughness, the stiffness degradation of the bridge and the variation of the air temperature changing the air density are found to be the main factors that increase the level of vibration noise. Consequently, The amplification rate of noise increases with the traveling speed and the vehicle weight.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.4
• /
• pp.570-578
• /
• 1997

At design stage of new motor or when taking remedial action of old motor, a lot of information can be obtained from thermal parameters analysis. This study focused on the temperature rise of TEFC induction motor with respect to various thermal parameters. Frame heat transfer had the most important effect on coil temperature rise. But those of air gap and rotor fan had no effect. This fact shows fan action is more important than fin action in the case of rotor fan. Coil temperature can be more decreased by cooling near the heat sources than any other parts from the results of thermal conductivity and loss tests. Variation of cooling air flow rate and motor volume effects on coil temperature were also tested. These tests suggest that improvement of cooling fan performance is important in reducing the coil temperature rise. Thermal equivalent program was verified by comparison of some experimental results.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.283-286
• /
• 2003

In this paper, we represent an implementation of burst QPSK receiver for underwater acoustic communication. Transmitter sends 5,000 symbols at 25kHz frequency with 200 kHz D/A sampling rate. The received signal is sampled at 100 kHz. Implemented receiver acquires the frame synchronization, coarse symbol timing estimate, and coarse phase offset estimate using 32 symbol length preamble. The estimated phase offset is used to initiate of 2nd order PLL. The transmission experiment results show that PLL is a mandatory to compensate Doppler shift due to the variation of tidal current.

• Journal of Information Science Theory and Practice
• /
• v.11 no.4
• /
• pp.40-50
• /
• 2023

Research in interdisciplinary fields like biomechanics is published in a variety of journals whose visibility depends on bibliometric indexing that is often driven by citation analysis of bibliometric databases. This study documented variation in publication metrics and research subject categories assigned to 14 biomechanics journals. Authors, citation, and citation rate (CR) were collected for the top 15 cited articles in the journals retrieved from the Google Scholar service. Research subject categories were also extracted for journals from three databases (Dimensions, Journal Citation Reports, and Scopus). Despite the focus on biomechanics for the journals studied, these biomechanics journals have widely varying CR and subject categories assigned to them. There were significant (p=0.001) and meaningful (77-108%) differences in median CR between average, low, and high CR groups of these biomechanics journals. Since CR are primary data used to calculate most journal metrics and there is no one biomechanics subject category, field normalization for journal citation metrics in biomechanics is difficult. Care must be taken to accurately interpret most citation metrics of biomechanics journals as biased proxies of general usage of research, given a specific database, time frame, and area of biomechanics research.

• Journal of Broadcast Engineering
• /
• v.21 no.3
• /
• pp.349-356
• /
• 2016

In this paper, we propose an efficient assignment method that assigns quantization parameter (QP) in accordance with group of picture (GOP) structure given in HEVC encoder. Each video frames can have difference QP values based on given GOP configuration for HEVC encoding. Particularly, for important frames we can assign low QP values, and vice versa. However, there has not been thorough investigation on efficient QP assignment method by far. Even in HEVC reference software encoder, only monotonic QP assignment method is employed. Thus, the proposed method assign adaptive QP values to each GOP so that temporal dynamic activity between GOPs can be exploited. Through the experiment, the proposed method showed a 7.3% gain of compression performance in terms of BD-rate compared to HEVC test model (HM) in low-delay configuration, and outperformed the existing QP assignment study on average.

• Health Policy and Management
• /
• v.30 no.1
• /
• pp.37-49
• /
• 2020

Background: Unmet healthcare needs have many advantages for measuring inequalities in healthcare use. However, the existing indicator is difficult to capture the reality of unmet healthcare needs sufficiently and is not quite appropriate in comparing regional inequality. The purpose of this study is to critically analyze the utilization of the unmet healthcare need indicator for regional healthcare inequalities research. Methods: We used the level of healthcare accessibility and healthcare need to categorize the regions that are known to cause differences in healthcare utilization between regions and verified how existing unmet healthcare need indicator is distributed at the regional level. Results: Four types of regions were classified according to the high and low levels of healthcare needs and accessibility. The hypothesis about the regional type expected to have the highest unmet healthcare need was not proved. The hypothesis about the lowest expected regional type was proved, but the difference in the average rate of unmet healthcare needs among regional types was not significant. The standard deviation of the rate of unmet healthcare needs among regions within the same type was also higher than the overall regional variation, which also disproved the whole frame of hypothesis. Conclusion: Failure to prove the hypothesis means the gap between the supposed meaning of the indicator and the reality. In order to understand the current state of healthcare utilization of people in various regions of Korea and to resolve inequality, fundamental research on the in-depth structure and mechanisms of healthcare utilization is needed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.4 no.4
• /
• pp.50-58
• /
• 2000

Burning rate of the matrix propellant($r_{sb}$) and burning rate along the metal wire($r_w$) were measured and analyzed for the HTPB/AP/Al propellant embedded with Ag wire($\phi$0.15mm) according to weight % of RDX(0~20%). Variation of burning rate increment ratio($r_w$/$r_{sb}$) and pressure exponent(n) was studied for the nitramine propellant having 10% RDX embedded with three kinds of metal(Ag, Cu, and Ni-Cr) of which diameter range is between 0.1~0.6mm. Maximum burning rate increment ratio of the nitramine propellant embedded with Ag wire($\phi$0.1mm) was 5.94 at $20^{\cire}C$, 1000 psia, 16.4% faster than that of HTPB/AP propellant, it is because that autoignition temperature of the nitramine propellant was higher than that of HTPB/AP propellant. Standard deviation of absolute ($r_{wc}$/$r_{we}$)/$r_{we}$ calculated by using new empiracal equation composed of four dimensionless groups, is 6.11% less than that calculated by using original empirical equation composed of three dimensionless group. The new empiracal equation is derived from Buckingham pi theorem using the parameters such as thermal diffusivity, melting temperature. wire diameter, propellant sample diameter, frame temperature, autoignition temperature and matrix burning rate which influence on $r_w$.