• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.22 no.1
• /
• pp.86-91
• /
• 2000

Autogenous bone graft is the useful technique for management of various bone defect in oral and maxillofacial surgery. The most common site for bone graft harvest is the anterior iliac crest. There is usually considerable cancellous bone graft available and it can be obtained with minimal morbidity. However, complications noted in iliac crest grafts include prolonged postoperative pain, hematoma and fracture, gluteal muscle weakness. Occasionally, when large amounts of bone graft are needed and previous harvest procedure had used, iliac bone harvest may be not adequate. Like the iliac crest, the greater trochanter has abundant cancellous bone and is readily accessible with acceptable morbidity. The purpose of this study was to assess the availability of cancellous bone graft from the greater trochanter, compare the quantity with that available from the anterior iliac crest, investigate anatomical hazards, and make recommendations for consistent harvest.

• Journal of Industrial Technology
• /
• v.31 no.A
• /
• pp.45-51
• /
• 2011

A study has been made on defects which are formed in manufacturing processes of engine bearing and also on fatigue crack growth behavior in each step of bearing metal manufacturing. After the first step (sinter brass powder on steel plate ; Series A) many voids are made on brass surface and its size is decreased at the second step (rolling process of sintered plate ; Series B). After the third step (re-sintering step of brass powder and rolling ; Series C) the number of voids is decreased and its type shows line. The time of fatigue crack initiation and the growth rate of fatigue crack are in order of Series A, Series B, Series C. These reasons are that void fosters the crack initiation and growth, and residual stress made by rolling process affects on the crack growth rate in Series B, C. In forming and machining processes by use of final bearing metal, crack was observed at internal corner of flange and peeling off was observed at interface between steel and brass. Owing to the above crack and peeling off, it is considered that there is a possibility of fatigue fracture during the application time.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.11
• /
• pp.1036-1041
• /
• 2008

According to previous report, aged sleeves of old transmission line showed several defaulted installation patterns, which was biased or corrosive-fractured of steel sleeve installed cases. These defects can cause serious accidents such as rapid increasing of sag or falling out of overhead conductor from sleeves. Consequently, the defects lead to the major power outage. Corrosion of steel sleeve is a typical defect by aging of sleeves. And it occupied almost 25 percent of investigated aged sleeves. This paper studied thermal properties and tension for ACSR conductor in case of fractured steel sleeve model by corrosion. The temperature distribution within overhead conductor has a specific gradient. Thermal properties of splice connectors(sleeve and clamp) showed normal behavior. However, mechanical properties were worse than normal sleeves. The detailed results were presented in the text.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.633-634
• /
• 2006

The aim of present work is to link geometrical parameter of maximum area of structural defect $\sqrt{area}\;_{max}$ (proposed by Y. Murakami, 1983) with surface fatigue mechanisms. Determined relations allow making predictions of surface fatigue properties of cemented carbides (WC-Co hardmetal - H15 - 85wt% WC and 15wt %Co, TiC-based cermets - T60/8 - 60wt %TiC and Fe/8wt% Ni and T70/14 - 70wt %TiC and Fe/14wt% Ni) in conditions of rolling contact and impact cycling loading. Pores considered being equivalent to small defects. Three comparative defects conditions are distinguished: surface pore, just below free surface and interior pores. The Vickers hardness of binder (as main responsible for the fracture mechanism of hardmetal and cermets) assumed to be the basis of such assumption. The estimate of this prediction has been done by analyzing the pore sizes using the statistics of extremes. The lower bound of fatigue properties can be correctly predicted by considering the maximum occurring pore size.

• Laser Solutions
• /
• v.11 no.2
• /
• pp.8-14
• /
• 2008

Sintered specimen which used for a blade of diamond tool was manufactured in order to verify $CO_2$ laser weldability depend on sintered temperature. Five kind of specimen were prepared and the range of temperature is from $600^{\circ}C$ to $1000^{\circ}C$ at intervals of $100^{\circ}C$. As a result of the sintered density test, the porosity rate appeared in the range of $2.1%{\sim}21.4%$. After welding, the most segments had exceeds the minimum fracture stress (600MPa, The Standard Safety of Europe) at the welding strength test except on the sintered at $600^{\circ}C$. In case of the sintered at $700^{\circ}C$, even satisfied the safety allowable stress but cannot get the good quality for bead appearance because of humping defect. In the conclusion, we could know that it showed not only relatively soundness bead but also enough welding strength when the sintered blade of diamond tool is included less than 4% of porosity rate.

• Journal of the Korean Society for Railway
• /
• v.11 no.6
• /
• pp.524-529
• /
• 2008

The damaged wheel in railway vehicle would cause a poor ride comfort, a rise in the maintenance cost and even fracture of the wheel, which then leads to a tremendous social and economical cost. The defect initiation and crack propagation in wheel may result in the damage of the railway vehicle or derailment. Therefore, it is important to evaluate the characteristics of the wheel tread. In the present paper, the characteristics of wheel tread based on contact positions, running distance and brake pattern are evaluated. The result shows that the damaged wheel tread is remarkably depended on the contact positions between wheel and rail.

• Archives of Craniofacial Surgery
• /
• v.17 no.3
• /
• pp.128-134
• /
• 2016

Background: Blowout fracture is one of the most common facial fractures, and patients usually present with accompanying ocular complications. Many studies have looked into the frequency of persistent ocular symptoms, but there is no study on assault patients and related ocular symptoms. We evaluated the incidence of residual ocular symptoms in blowout fractures between assaulted and non-assaulted patients, and sought to identify any connection among the degree of enophthalmos, defect size, and assault-related injury. Methods: A retrospective review was performed for any patient who sustained a unilateral blowout fracture between January 2010 to December 2014. The collected data included information such as age, gender, etiology, and clinical ocular symptoms as examined by an ophthalmologist. This data was analyzed between patients who were injured through physical altercation and patients who were injured through other means. Results: The review identified a total of 182 patients. Out of these, 74 patients (40.7%) have been struck by a fist, whereas 108 patients (59.3%) have sustained non-assault related injuries. The average age was 36.1 years, and there was a male predominance in both groups (70 patients [94.6%] in the assaulted group and 87 patients [80.6%] in the non-assault group). Diplopia and enophthalmos were more frequent in patients with assault history than in non-assaulted patients (p<0.05). Preoperatively, 25 patients (33.8%) with assault history showed diplopia, whereas 20 patients (18.5%) showed diplopia in the non-assaulted group (p<0.05). Preoperative enophthalmos was present in 34 patients (45.9%) with assault history, whereas 31 patients (28.7%) showed enophthalmos in the non-assaulted group (p<0.05). Conclusion: Patients with an assault history due to a fist blow experienced preoperative symptoms more frequently than did patients with non-assault-related trauma history. Preoperative diplopia and enophthalmos occurred at a higher rate for patients who were assaulted. Surgeons should take into account such characteristics in the management of assaulted patients.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.31 no.6
• /
• pp.544-549
• /
• 2009

Failure to use effective methods of reduction, fixation and immobilization may lead to osteomyelitis with the exposed necrotic bone, as the overzealous use of transosseous wires & plates that devascularizes bone segments in the compound comminuted fractures of mandible. Once osteomyelitis secondary to fractures has become established, intermaxillary fixation should be instituted as early as possible. Fixation enhances patient comfort and hinders ingress of microorganisms and debris by movement of bone fragments. Teeth and foreign materials that are in the line of fracture should be removed and initial debridement performed at the earliest possible time. Grossly necrotic bone should be excised as early as possible ; no attempt should be made to create soft tissue flaps to achieve closure over exposed bone. The key to treatment of chronic osteomyelitis of the mandible is adequate and prolonged soft tissue drainage. If good soft tissue drainage is provided over a long period, sequestration of infected bone followed by regeneration or fibrous tissue replacement will occur so that appearance and function are not seriously altered. Localization and sequestration of infected mandible are far better performed by natural mechanism of homeostasis than by cutting across involved bone with a cosmetic or functional defect. As natural host defenses and conservative therapy begin to be effective, the process may become chronic, inflammation regresses, granulation tissue is formed, and new blood vessels cause lysis of bone, thus separating fragments of necrotic bone(sequestra) from viable bone. The sequestra may be isolated by a bed of granulation tissue, encased in a sheath of new bone(involucrum), and removed easily with pincettes. This is a case report of the long-term conservative drainage care in osteomyelitis associated with mandibular fractures.

• The Korean Journal of Nuclear Medicine
• /
• v.35 no.6
• /
• pp.371-377
• /
• 2001

Purpose: One or more abnormal vertebrae detected on bone scintigraphy is a common finding in clinical practice, and it could pose a diagnostic dilemma especially in cancer patients. as either metastasis or benign disease may cause scintigraphic abnormality. The purpose of this study was to determine whether additional spine SPECT has a role in differentiating malignant from benign lesions in patients with back pain. Materials and Methods: We reviewed spine SPECT studios obtained over a three-year period in 108 patients. Among them, forty-five patients with abnormal SPECT and clinically followed records were evaluated (20 cancer patients were included). Uptake patterns were classified as follows: 1. Body: diffusely increased uptake, linear increased uptake of end plate, segmental increased uptake, and cold defect, 2. Posterior element: posterior to body (pedicle), posterior to Intervertebral disc space (facet joint), and spinous process. Lesions were correlated with radiological findings and with final diagnosis. Results: Sixty-nine bone lesions were detected on SFECT images, including 18 metastases, 28 degenerative diseases and 21 compression fractures. Cold defect (6) and segmental increased uptake (5) were dominant findings in metastasis; linear increased uptake (12), and facet joint uptake (15) were in degenerative change; and diffuse increased uptake (9), and linear increased uptake (9) were in compression fracture. Conclusion: Cold defect and segmental increased uptake of body were characteristic findings of metastasis, but care should be taken because compression fracture also shows segmental increased uptake in some cases. Degenerative disease was easily diagnosed because of the typical finding of linear increased uptake of end plate and facet joint. Therefore, additional bone SPECT after planar bone scan would be helpful for differentiating metastasis from benign condition in cancer patients.

• Journal of Periodontal and Implant Science
• /
• v.27 no.4
• /
• pp.867-882
• /
• 1997

Safflower(Carthamus tinctorius $Linn\acute{e}$ has been traditionally used for the treatment of blood stasis, and Dipsasi Radix has been used as a drug for fracture in Chinese medicine. The purpose of present study was to examine the biologic effects of safflower extract and Disasi radix extracts on the periodontal. ligament cells and osteoblastic cells and on the wound healing of rat calvarial defect. The ethanolic extract of safflower blossom, safflower seed and Dipsasi Radix(125, 250, and 500 ${\mu}g/ml$) were prepared as test group, and PDGF-BB(lOng/ml) and unsafonifiable fraction of Zea Mays L.(125, 250, and 500 ${\mu}g/ml$) were employed as positive control. The effects of each agents on the growth and survival, ALPase activity, expression of PDGF-BB receptor, chemotactic response of PDL cell and ATCC human osteosarcoma MG63 cells in vitro were examined. The tissue regenerative effect of each extracts was evaluated by histomorphometric measuring of newly formed bone on the 8mm defect in rat calvaria after oral administration of 3 different dosages groups : 0.02, 0.1 and 0.35g/kg, per day. It was also employed the same dosages of unsaponifiable fraction of Zea Mays L. as positive controls. Safflower blossom extract, safflower seed extract, and Dipsasi Radix extract stimulate the cellular activity of MG63 cells in concentration range of $125-500{\mu}g/ml$, and safflower bolssom extract and safflower seed extract stimulate also the cellular activity of periodontal ligament cells in concentration range of $250-500{\mu}g/ml$. In activity of ALPase, $250-500{\mu}g/ml$ of safflower blossom extracts showed significant stimulating effects on MG63 cells, and the same concentration range of safflower seed extracts showed significant effect on periodontal ligament cells. In the recovery on PDGF-BB receptor expression which was depressed by $IL-1{\beta}$, $125-250{\mu}g/ml$ of safflower blossom extracts and $250-500{\mu}g/ml$ of safflower seed extracts showed significant increasing effect on MG63 cells, and $500{\mu}g/ml$ of safflower blossom extract and $250-500{\mu}g/ml$ of safflower seed extracts showed significant effect on periodontal ligament cells. In chemotactic response, among all tested group, safflower seed extracts only were chemotactic to MG63 cells and periodontal ligament cells in concentration range of $125-500{\mu}g/ml$. Also in the view of bone regeneration in rat calvarial defect model, the only group that was orally administrated 0.35g/kg, day of safflower seed extract showed significant new bone formation. These results suggested that safflower extracts might have a potential possibilities as an useful drug for adjunct to treatment for regeneration of periodontal defect.