• 한국안전학회지
• /
• 제37권5호
• /
• pp.7-13
• /
• 2022

Digital image correlation (DIC) is a method used to measure the displacement and strain of structures. It involves transforming and analyzing images before and after deformation using correlation coefficients from irregular light and shade on the surface of structures. In the present study, a microspeckle pattern was applied to the surface of a specimen to identify initial cracking. The test specimen constituted CFRP composites laminated on a curved Al liner The specimen was manufactured by stacking 100 ply of CFRP prepregs in the 0° and 90° directions in a three-point bending test. The equivalent strain was evaluated through DIC analysis after monitoring deformation using a CCD camera. Fracture shape was observed using a microscope. The equivalent strain contour distribution was checked until the maximum load fracture occurred at the center of the test specimen. Variations in the strain indicated the initial occurrence and progression of microcracks. These results can be used to improve the accuracy of detecting micro crack initiation and to achieve structural stability.

• 한국기계가공학회지
• /
• 제11권5호
• /
• pp.13-20
• /
• 2012

In order to clarify the effect of overload on crack growth behaviors, fatigue tests for overload were carried out for round plain specimens of SM45C steel. In the experiment, typical semi-elliptical crack shape was found and further crack growth behaviors were tested. Using three types of single overload fatigue tests, Crack growth retardation phenomenon were examined. The growth rate of surface crack(da/dN) during retardation period was analyzed in terms of ${\Delta}K$ and ${\Delta}K_{eff}$. On the growth rate of surface crack analyzed by ${\Delta}K$, the dependence of overload stress levels appears. However, on the growth rate by ${\Delta}K_{eff}$ obtained by Willenborg analysis, there is a non-liner relationship between da/dN and ${\Delta}K_{eff}$ with narrow scatter band.

• 한국기계가공학회지
• /
• 제9권4호
• /
• pp.44-52
• /
• 2010

Recently, with the high performance and efficiency of machine, there have been required the multi-functions in various machine parts, such as the heat resistance, the abrasion resistance and the stress resistance as well as the strength. Fatigue crack growth tests were carried out to investigate the fatigue characteristics of high carbon steel (SM53C) experienced by high-frequency induction treatment. The influence of high-frequency induction treatment on fatigue limit was experimentally examined with the specialfocus on the variation of surface microstructure and the fatigue crack initiation and propagation through fractography. Also, the shape of hardening depth, hardened structure, hardness, and fatigue-fracture characteristics of SM53C composed by carbon steel are also investigated.

• 한국기계가공학회지
• /
• 제11권4호
• /
• pp.82-89
• /
• 2012

In order to clarify the effect of overload on crack growth behaviors, fatigue tests for overload were carried out for round plain specimens of SM45C steel. In the experiment, typical semi-elliptical crack shape was found and further crack growth behaviors were tested. Using three types of single overload fatigue tests, Crack growth retardation phenomenon were examined. The growth rate of surface crack(da/dN) during retardation period was analyzed in terms of ${\Delta}K$ and ${\Delta}K_{eff}$. On the growth rate of surface crack analyzed by ${\Delta}K$, the dependence of overload stress levels appears. However, on the growth rate by ${\Delta}K_{eff}$ obtained by Willenborg analysis, there is a liner relationship between da/dN and ${\Delta}K_{eff}$ with narrow scatter band.

• 공업화학
• /
• 제5권5호
• /
• pp.878-888
• /
• 1994

ABS 수지의 파단 거동을 살펴 보기 위해 rubber content, molecular weight, lubricant의 종류 및 양과 파단 speed, 주위 환경온도를 변수로 측정한 후 전자현미경 사진으로 그 파단면을 살펴 보았다. Tension하에서 rubber content와 lubricant content는 감소할수록, molecular weight와 tension speed는 증가할수록 strength는 증가하였으며, 파단면은 rubber content, speed, molecular weight는 감소할수록, liquid lubricant를 사용할수록 파단부위 주변의 변형이 일어나지 않았으며, 파단면도 수지가 서로 미끄러져 파단되는 상태가 아닌 상분리와 같은 형상으로 분리파단되었다. Impact하에서 rubber content, molecular weight, 주위 환경온도, lubricant content가 증가할수록 strength도 증가하였으며, 파단면은 사진상의 파단표면적이 작은 것이 높은 strength를 나타내고 있다.

• Journal of Mechanical Science and Technology
• /
• 제20권4호
• /
• pp.473-481
• /
• 2006

Predicting fatigue life by numerical methods was almost impossible in the field of rubber materials. One of the reasons is that there is not obvious fracture criteria caused by nonstandardization of material and excessively various way of mixing process. But, tearing energy as fracture factor can be applied to a rubber-like material regardless of different types of fillers, relative to other fracture factors and the crack growth process of rubber could be considered as the whole fatigue failure process by the existence of potential defects in industrial rubber components. This characteristic of fatigue failure could make it possible to predict the fatigue life of rubber components in theoretical way. FESEM photographs of the surface of industrial rubber components were analyzed for verifying the existence and distribution of potential defects. For the prediction of fatigue life, theoretical way of evaluating tearing energy for the general shape of test-piece was proposed. Also, algebraic expression for the prediction of fatigue life was derived from the rough cut growth rate equation and verified by comparing with experimental fatigue lives of dumbbell fatigue specimen in various loading condition.

• 화약ㆍ발파
• /
• 제34권1호
• /
• pp.11-18
• /
• 2016

도심지나 보안건물과 근접한 곳에서 폭약을 사용하는 발파작업이 수행되는 경우 지반진동 및 소음의 영향을 최소화 시킬 필요가 있다. 이러한 지반진동과 소음은 암반의 천공내에 장전된 폭약이 기폭되며 주변 암반을 파괴하고 남은 일부 충격에너지에 의하여 발생된다. 최근 천공 내 U형 철재장약홀더를 삽입하여 충격파의 전파방향을 제어하여 자유면방향으로 파쇄효과를 유지하며 암반 내로 전파하는 충격진동을 감쇄시키는 발파 공법이 제안되었다. 본 연구에서는 U형 철재장약홀더를 적용한 암반발파에서 충격파의 전파특성을 파악하기 위하여, AUTODYN 소프트웨어를 이용하여 장약홀더 내 장전된 폭약의 폭굉을 모사하고 주변암반에 전달된 충격파를 측정하였다. 또한 장약홀더 발파의 암파쇄 효과를 파악하기 위하여 동적파괴과정해석코드인 DFPA(Dynamic Fracture Process Analysis)를 적용하여 장약홀더를 이용한 장약조건을 고려한 2자유면 발파를 모사하였다. 일반발파의 장약조건을 고려한 충격파 발생 및 파괴과정해석을 추가적으로 수행하여 장약홀더의 암파쇄효과를 비교하였다.

• 한국전기전자재료학회논문지
• /
• 제17권3호
• /
• pp.267-271
• /
• 2004

The joint strength and fracture surface of Sn-Pb solder bump in photo diode packages after isothermal aging testing were studied experimentally. Cu/Sn-Pb solders were adopted, and aged for up to 900 hours at 12$0^{\circ}C$ and 17$0^{\circ}C$ to analyze the effect of intermetallic compound(IMC). In 900-hour aging experiments, the maximum shea strength of Sn-Pb solder decreased by 20％ and 9％. The diffraction patterns of Cu$_{6}$Sn$_{5}$, scallop-shape IMC, and planar-shape Cu$_3$Sn were observed by Transmission Electron Microscopy (TEM).EM).

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1995년도 특별강연 및 춘계학술발표 개요집
• /
• pp.155-159
• /
• 1995

A16061 alloy reinforced with 10 vol% $\delta$-A1$_2$O$_3$ short fiber have been fabricated by Rheo-compocasting and squeeze casting and extruded at high temperature using conical shape die and curved shape die with various extrusion ratios.. Tensile and hardness tests were carried out to examine mechanical properties of extruded materials and SEM observation of fractured surface was capable of accounting for fracture mechanism and bonding state of fiber and matrix.

• 대한기계학회논문집
• /
• 제14권6호
• /
• pp.1515-1522
• /
• 1990

본 연구에서는 천연다이아몬드의 인선형상을 R형과 S형으로 구분하여 제작하 고 미세이송과 절삭속도 변화를 주어 이에 얻어지는 표현거칠기, 칩 생성기구 및 경면 성을 검토하였다.