• Journal of the Korean Society of Costume
• /
• v.38
• /
• pp.179-191
• /
• 1998

On this thesis, the focus is that studying costumes which have been affected by deconstructionism that is based on chaos and fractal the-ory. Chaos and fractal theory is accepted as a new paradigm for open world which is changing very vast and fast. And this theory is needed for artists and designers who should have spacetime conciousness and open mind and attitude towark open world. In the results, various costume typess of deconstructionism have been shown by fashion designers and artists' works. Thoes are as follows; 1. normal relationship of costume changes to abnormal relationship 2. three-dimentional structure of costume changes to two-dimentional structure. 3. open to materials and techniques. 4. separated costume parts reconstruct as ambiguous whole on function. 5. body absence and accessorizing.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.43-46
• /
• 2000

In this study, (Ba, Sr)$TiO_3$ (BST) ceramics thin films were prepared by Sol-Gel method. BST solution was made and spin-coated on Pt/$TiO_2$/Si substrate at 4000 [rpm] for 10 seconds. Coated specimens were dried at 150[$^{\circ}C$] for 5 minutes. Coating process was repeated 3 times and then sintered at 750[$^{\circ}C$] for 30 minutes. Structure and electrical characteristics of specimen was analyzed by Fractal Process. Thickness of BST ceramics thin films are about 2800[$\AA$]. Dielectric constant and loss of thin films was little decreased at 1[kHz]~1[MHz]. Dielectric constant and loss to frequency were 250 and 0.02 in BST3. The property of leakage current as the relation between the current and the voltage was that change of the leakage current was stable when the applied voltage was 0~3[V].

• Korean Chemical Engineering Research
• /
• v.60 no.2
• /
• pp.260-266
• /
• 2022

Average aggregate size in particulate suspensions is estimated with scaling theories based on fractal concept and elasticity of colloidal gel. The scaling theories are used to determine structure parameters of the aggregates, i.e., fractal dimension and power-law exponent for aggregate size reduction with shear stress using scaling behavior of elastic modulus and shear yield stress as a function of particle concentration. The structure parameters are utilized to predict aggregate size which varies with shear stress through rheological modeling. Experimentally rheological measurement is conducted for aqueous suspension of zinc oxide particles with average diameter of 110 nm. The predicted aggregate size is about 1135 nm at 1 s^-1 and 739 nm at 1000 s^-1 on the average over the particle concentrations. It has been found that the predicted aggregate size near 0.1 s^-1 agrees with that the measured one by a dynamic light scattering analyzer operated un-sheared.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.24-25
• /
• 2017

Gamma-C₂S (γ-C₂S) is a substance that is difficult to react with water under normal temperature but can absorb a large amount of CO₂ in the air. The addition of γ-C₂S to cementitious materials through the curing of CO₂ can improve the pore structure and improve the durability of the material. In this study, three kind of Ca-bearing materials : CaO, Ca(OH)₂, CaCO₃, were calcined 2.5h at 1450℃ to synthesize γ-C₂S after mixing with SiO₂ respectively. Among them, Ca(OH)₂ mixed with SiO₂ after calcining shows highest content. Synthesized γ-C₂S was added to the cement mortar, after water curing for 1 month, accelerated carbonation test was experimented. After 28d accelerated carbonation test, pore structure will be detectived by MIP. Based on the MIP result, following the calculation method of Fractal theory, the pore structure will be quantitative described.

• Journal of The Korean Astronomical Society
• /
• v.37 no.4
• /
• pp.137-141
• /
• 2004

We have estimated the fractal dimension of the molecular clouds in the Antigalactic Center based on the $^{12}CO$ (J = 1- 0) and $^{13}CO$ (J = 1- 0) database obtained using the 14m telescope at Taeduk Radio Astronomy Observatory. Using a developed code within IRAF, we were able to identify slice-clouds, and determined the dispersions of two spatial coordinates as well as perimeters and areas. The fractal dimension of the target region was estimated to be D = 1.34 for low resolution $^{12}CO$ (J = 1 - 0) database, and D = 1.4 for higher resolution $^{12}CO$ (J = 1 - 0) and $^{13}CO$ (J = 1 - 0) database, where $P {\propto} A^{D/2}$. The sampling rate (spatial resolution) of observed data must be an important parameter when estimating fractal dimension. Our database with higher resolution of 1 arcminute, which is corresponding to 0.2 pc at a distance of 1.1 kpc, gives us the same estimate of fractal dimension to that of local dark clouds. Fractal dimension is apparently invariant when varying the threshold temperatures applied to cloud identification. According to the dispersion pattern of longitudes and latitudes of identified slice-clouds, there is no preference of elongation direction.

• Journal of the Korean Society of Visualization
• /
• v.22 no.1
• /
• pp.79-84
• /
• 2024

As microchips' degree of integration is getting higher, its cooling problem becomes important more than ever. One of the promising methods is using fractal microchannel heat sink by mimicking nature's Murray networks. However, most of the related works have been progressed only by numerical analysis. Perhaps such lack of direct experimental studies is due to the technical difficulty of the temperature and heat flux measurement in complex geometric channels. Here, we demonstrate the direct visualization of in situ temperature profile in a fractal microchannel heat sink. By using the temperature-sensitive fluorescent dye and a transparent Polydimethylsiloxane window, we can map temperature profiles in silicon-based fractal heat sinks with various fractal scale factors (a=1.5-3.5). Then, heat transfer rates and pressure drops under a fixed flow rate were estimated to optimize hydrodynamic and thermal characteristics. Through this experiment, we found out that the optimal factor is a=1.75, given that the differences in heat transfer among the devices are marginal when compared to the variances in pumping power. This work is expected to contribute to the development of high-performance, high-efficiency thermal management systems required in various industrial fields.

• Journal of Korea Water Resources Association
• /
• v.41 no.8
• /
• pp.797-806
• /
• 2008

The geometric properties of the drainage structures are analyzed through depicting the drainage network which is composed of the whole drainage paths in the natural basin defined at the specific scale. The theoretical consideration is performed on the general structures of networks organized by ramification process based on Fractal tree and Horton's law. The drainage network is generated via ArcGIS, ordered by Strahler's ordering scheme and investigated with Strahler's order. As a results of the Richardson's method it is shown that there may exist the distinct behavioral characteristics between overland-flow and channel flow and the natural stream networks would be space-filling Fractals. As a result, it is shown that the values estimated by considering the overland-flow on being applied to the field data give the different results from the empirical method applied until now. As expected, therefore the results obtained from this study are sure to be devoted further researches on the channel networks.

• IE interfaces
• /
• v.17 no.spc
• /
• pp.46-51
• /
• 2004

In order to quickly respond to the rapidly changing manufacturing environment, it is imperative for the system to have such capabilities as flexibility, adaptability, reusability, etc. One of the promising approaches for new manufacturing paradigm satisfying those capabilities is the fractal manufacturing system (FrMS). The FrMS can be optimized by reorganizing the structure of fractals through the dynamic restructuring process (DRP) to deal with the changes of environment. Through the DRP, the logical connections between fractals and roles of fractals are autonomously changed. To determine an appropriate fractal structure, certain rules are needed to build and evaluate alternative structures for fractals involved in the DRP. In this paper, an algorithm for the DRP-, which is invoked when some equipment are unavailable, is introduced and explained with examples.

• Journal of Advanced Navigation Technology
• /
• v.15 no.6
• /
• pp.1008-1014
• /
• 2011

In this paper, multi-band fractal microstrip patch antenna which is possible for WLAN band and WiMax band is designed and made. For multi-resonance of developed antenna, resonance frequency, impedance matching, polarity and reflection pattern can mad perfectly, then to make satisfied multi-independent frequency three kind of half circle fractal patch is inserted. In the situation continuously happening half circle in designed structure, antennas one of half-circle band is shown.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1389-1390
• /
• 2008

In this paper, a This paper presents the Hilbert curve Fractal Antenna has properties of Self-similarity and Plane-Filling. In case of fractal antenna is very useful to be small and multiple resonant. The antenna has a resonant frequency of 910MHz and 2450MHz base on RFID(Radio Frequency IDentification). In particular, we designed tag antenna by the $4^{th}$ repeat. According to the repeated number of fractal structures, resonance frequency became looking downward. Theses presented Frequency, Such as 910MHz and 2450MHz, at $S_{11}$ is -31dB and -19dB, bandwidth 120MHz and 90MHz to VSWR 2:1.