• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.6
• /
• pp.2734-2747
• /
• 2018

In this study, a novel fractal ring antenna with a compact size of $24{\times}9{\times}0.8mm^3$ was configured using three iterations. Low profile, circular polarization, and measured operating bands (4.5-6.5 GHz) meet specifications of the upper band used in Wi-Fi and WiMAX applications. The antenna featured, stable radiation properties, especially gain and efficiency, in the notched band (92%). In deep, the antenna impedance, reflection coefficients, surface current distribution and circular polarization for the three iterations had been studied to improve the process of antenna design and its radiation characteristics.

• Journal of the Korean Society of Safety
• /
• v.16 no.1
• /
• pp.31-36
• /
• 2001

Surface crack growth characteristics and influence of the stress amplitude in rotary bending fatigue test were evaluated for annealed S35C steel, and than fractal dimensions of fatigue crack paths estimated using the box counting method. The following results that will be helpful to understand the fatigue crack growth mechanism were obtained. (1) Crack growth rate ds/dN and db/dN (s : half crack length at the surface crack, b : crack depth) depended on stress amplitude (${\Delta}{\sigma}/2$), stress intensity factor range (${\Delta}K_A, {\Delta}K_C$) and crack length. (2) At the effect area of 0.3 mm hole notch (s＜0.5 mm) crack growth rate did not depend on these factors. (3) The fractal dimensions (D) increased with stress amplitude (${\Delta}{\sigma}/2$) but decreased with cyclic number.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.3
• /
• pp.440-444
• /
• 2002

A microstrip patch antenna with circular polarization based on the Sierpinski fractal geometry is proposed. The Sierpinski fractal is composed of 3 equilaterial triangular patch and is easy to produce a circular polarization by sequentially rotation techniques. The characteristics of a 1x3 antenna array from Sierpinski geometry are investigated, i.e. port isolation and AR(axial Ratio).

• Proceedings of the KIEE Conference
• /
• 2003.10a
• /
• pp.25-28
• /
• 2003

Fractal mathematics is being highlighted as a research method for classification of image. But the application of Fractal dimension(FB) has been required the complicated calculation method because of its complex repetition progressing. In this paper, it has been developed the new approach method to express the Fractal Dimension(FB) for aging level calculation and estimation system of outside insulator using special image processing algorithm. As a result after FD testing, the recognized aging estimation of FD has a very characteristics compared to the conventional visual inspection.

• Proceedings of the KOSOMBE Conference
• /
• v.1994 no.12
• /
• pp.169-171
• /
• 1994

This paper is to find out more reliable analyzing method of heart rate variability. Heart rate variability analysis is to evaluate cardiovascular stability and also have used as an indicator of autonomic nervous system activity. In this study, time domain analysis, spectral analysis and state space analysis method are applied to analyze heart rate variability. Because of nonlinear characteristics of heart rate, we need not only spectral analysis, but also state space analysis. Fractal dimension of spectral estimation is useful indicator of autonomic nervous activity.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.94-94
• /
• 2010

The result was estimated on the fractal characteristics as possibilities of identification of manufacture state for long period stabilities. At the second, the dangerous area was easily found to the recurrent phenomena of FD output. However, such area is very difficult to analysis of mechanism and to predict the lifetime in present state, it is possible to discriminate by means of data accumulation.

• ETRI Journal
• /
• v.23 no.3
• /
• pp.129-137
• /
• 2001

A random sampling or systematic sampling method is commonly used to assess the accuracy of classification results. In remote sensing, with these sampling methods, much time and tedious work are required to acquire sufficient ground truth data. So, a more effective sampling method that can represent the characteristics of the population is required. In this study, fractal analysis is adopted as an index for reference sampling. The fractal dimensions of the whole study area and the sub-regions are calculated to select sub-regions that have the most similar dimensionality to that of the whole area. Then the whole area's classification accuracy is compared with those of sub-regions, and it is verified that the accuracies of selected sub-regions are similar to that of whole area. A new kind of reference sampling method using the above procedure is proposed. The results show that it is possible to reduce sampling area and sample size, while keeping the same level of accuracy as the existing methods.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.10a
• /
• pp.245-252
• /
• 2002

The roughness of Joomoonjin sand and the Dongchun river sand was analysed by the fractal theory. It was found that the fractal dimension(D$\_$F/) of Joomoonjin sand is a little smaller than the Dongchun river sand. That means Joomoonjin sand is smoother than the Dongchun river sand. The measurements of D$\_$F/ of different fraction of the Donchun river sand showed that large particles were rougher than fine particles. The shapes of both sands were analysed by the Discrete Fourier Transform(DFT) and the Grid-based(GB) method. Normalization of coefficients with respect to size, starting point and its orientation made the coefficients invaried to these characteristics. The mean of the normalized coefficients was used to reconstruct the average shape for both sands, respectively. The measurements of the ellipticity ratio of different fraction of both sands showed that Joomoonjin sand is slightly flatter than the Dongcun river sand.

• Journal of information and communication convergence engineering
• /
• v.1 no.1
• /
• pp.53-57
• /
• 2003

Chaos theory is a study researching the irregular, unpredictable behavior of deterministic and non-linear dynamical system. The interpretation using Chaos makes us evaluate characteristic existing in status space of system by tine series, so that the extraction of Chaos characteristic understanding and those characteristics enables us to do high precision interpretation. Therefore, This paper propose the new method which is adopted in extracting character features and recognizing characters using the Chaos Theory. Firstly, it gets features of mesh feature, projection feature and cross distance feature from input character images. And their feature is converted into time series data. Then using the modified Henon system suggested in this paper, it gets last features of character image after calculating Box-counting dimension, Natural Measure, information bit and information dimension which are meant fractal dimension. Finally, character recognition is performed by statistically finding out the each information bit showing the minimum difference against the normalized pattern database. An experimental result shows 99% character classification rates for 2,350 Korean characters (Hangul) using proposed method in this paper.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.43-46
• /
• 2000

In this study, (Ba, Sr)$TiO_3$ (BST) ceramics thin films were prepared by Sol-Gel method. BST solution was made and spin-coated on Pt/$TiO_2$/Si substrate at 4000 [rpm] for 10 seconds. Coated specimens were dried at 150[$^{\circ}C$] for 5 minutes. Coating process was repeated 3 times and then sintered at 750[$^{\circ}C$] for 30 minutes. Structure and electrical characteristics of specimen was analyzed by Fractal Process. Thickness of BST ceramics thin films are about 2800[$\AA$]. Dielectric constant and loss of thin films was little decreased at 1[kHz]~1[MHz]. Dielectric constant and loss to frequency were 250 and 0.02 in BST3. The property of leakage current as the relation between the current and the voltage was that change of the leakage current was stable when the applied voltage was 0~3[V].