• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제18권3호
• /
• pp.29-39
• /
• 2012

Window and shading designs have a great influence on energy consumption and daylighting in buildings. As far as energy is concerned, small window area is advantageous. But it is not good to the patient healing in hospital. So it is important to find out the optimum window shape which is favorable for both energy consumption and patient healing. In this study, annual energy consumption and daylight illumination levels were analyzed according to the window shapes and shading devices for a multi-beded patient room in hospitals. The simulations were conducted for 19 different cases by COMFEN 4.0 computer simulation program. The results of this paper are as follows. First, window to wall area ratio and shading devices have great influences on annual energy consumption. But it is a problem in that they decrease significantly daylight level in bed room. Second, considering the same energy consumption, reducing the width of window rather than the hight of window is desirable for the secure of daylight level. Third, increase of the number of horizontal shade is not desirable in south face of the building for the energy consumption and daylight level. Fourth, sun shade is not necessary in north face of the building for the energy consumption and daylight level.

• Structural Engineering and Mechanics
• /
• 제47권5호
• /
• pp.599-622
• /
• 2013

Seismic response of two dimensional liquid tanks is numerically simulated using fully nonlinear velocity potential theory. Galerkin-weighted-residual based finite element method is used for solving the governing Laplace equation with fully nonlinear free surface boundary conditions and also for velocity recovery. Based on mixed Eulerian-Lagrangian (MEL) method, fourth order explicit Runge-Kutta scheme is used for time integration of free surface boundary conditions. A cubic-spline fitted regridding technique is used at every time step to eliminate possible numerical instabilities on account of Lagrangian node induced mesh distortion. An artificial surface damping term is used which mimics the viscosity induced damping and brings in numerical stability. Four earthquake motions have been suitably selected to study the effect of frequency content on the dynamic response of tank-liquid system. The nonlinear seismic response vis-a-vis linear response of rectangular liquid tank has been studied. The impulsive and convective components of hydrodynamic forces, e.g., base shear, overturning base moment and pressure distribution on tank-wall are quantified. It is observed that the convective response of tank-liquid system is very much sensitive to the frequency content of the ground motion. Such sensitivity is more pronounced in shallow tanks.

• 한국실내디자인학회논문집
• /
• 제25권1호
• /
• pp.181-191
• /
• 2016

The purpose of this study is to analyze affordance of façade design by extracting analysis elements of affordance in façade design domestic five-star hotels. The subjects of this study were 88 domestic five-star hotels; we selected literature review and case study as methodology. The analysis elements included mass forms, exterior colors, window frame patterns, exterior characteristics, and door types based on the visual perception factors of façade design from the concept of affordance. The results of the study were as follows. First, the mass forms were divided into stackable, integral, and connection types, and stackable type was most frequent. Second, exterior colors were divided into achromatic, red, yellow, and opaque color parts, and the achromatic parts were most frequent. Third, the window frame patterns were divided into grid, irregular, full, horizontal, and vertical windows, and grid windows were most frequent. Fourth, the exterior characteristics were divided into formative mass, horizontal partition, design contrast, tiled roof, and facility connection, and the formative mass was most frequent. Fifth, the door types were divided into porch, piloti, and wall type, and porch was most frequent. The results of this study showed that the façade design elements such as mass forms, exterior colors, window frame patterns, exterior characteristics, and door types intentionally contained affordance.

• 대한기계학회논문집B
• /
• 제24권9호
• /
• pp.1227-1238
• /
• 2000

This study examines the effects of the discretization schemes on numerical solutions of viscoelastic fluid flows. For this purpose, a temporally evolving mixing layer, a two-dimensional vortex pair interacting with a wall, and a turbulent channel flow are selected as the test cases. We adopt a fourth-order compact scheme (COM4) for polymeric stress derivatives in the momentum equations. For convective derivatives in the constitutive equations, the first-order upwind difference scheme (UD) and artificial diffusion scheme (AD), which are commonly used in the literature, show most stable and smooth solutions even for highly extensional flows. However, the stress fields are smeared too much and the flow fields are quite different from those obtained by higher-order upwind difference schemes for the same flow parameters. Among higher-order upwind difference schemes, a third-order compact upwind difference scheme (CUD3) shows most stable and accurate solutions. Therefore, a combination of CUD3 for the convective derivatives in the constitutive equations and COM4 for the polymeric stress derivatives in the momentum equations is recommended to be used for numerical simulation of highly extensional flows.

• 한국정밀공학회지
• /
• 제2권2호
• /
• pp.31-42
• /
• 1985

The metal flow and the strain distribution is investigated for the steady state and non-steady state bulk deformation processes by using an improved visioplasticity method which includes the effective smoothing scheme. The comparison of various smoothing schemes leads to the selection of the five- point least square smoothing method which is employed to reduce the measurement errors. As a steady state forming process experiments are carried out for axisy- mmetric forward extrusion through conical and curved dies of various area reduc- tions using Aluminum and steel billets. Axisymmetric backward extrusion is chosen for a nonsteady state forming process. In axisymmetric forward extrusion the results from visioplasticity show that the curved die of a fourth-order polynomial renders more uniform distribution of strain rates and strains. Higher reduction leads to greater strain rates at the outer side of the billet. The visioplastic observation for axisymmetric backward extrusion as a non-steady state deformation process shows the concentration of higher strain at the inner wall of the extruded product. The visioplastic results in forward extrusion are in agreement with the computed results by the finite element method. It is thus shown that the visio- plasticity combined with a smoothing technique is an effective method to determine the pattern and the distribution of strain rates and strains.

• Journal of Korean Neurosurgical Society
• /
• 제52권3호
• /
• pp.250-253
• /
• 2012

We report a rare case of cerebellar liponeurocytoma with an unusually aggressive histopathology. A 49-year-old man presented with a four-month history of headache, vertigo, and progressive swaying gait. Magnetic resonance imaging showed a $3{\times}3.5cm$ sized relatively well-demarcated round mass lesion in the fourth ventricle, characterized by high signal intensity on T2-weighted images. Postcontrast images revealed strong enhancement of the solid portion and the cyst wall. The patient underwent suboccipital craniectomy and tumor removal. The pathologic diagnosis was cerebellar liponeurocytoma. Adjuvant radiotherapy was offered due to concerns related to the high proliferative index (Ki-67, 13.68%) of the tumor. At the last routine postoperative follow-up visit (12 months), the patient complained of no specific symptom and there was no evidence of tumor recurrence. However, longterm follow-up and the analysis of similar cases are necessary because of the low number of reports and the short follow-up of cases.

• Ocean Systems Engineering
• /
• 제1권4호
• /
• pp.355-372
• /
• 2011

Based on the fully nonlinear velocity potential theory, the liquid sloshing in a three dimensional tank under random excitation is studied. The governing Laplace equation with fully nonlinear boundary conditions on the moving free surface is solved using the indirect desingularized boundary integral equation method (DBIEM). The fourth-order predictor-corrector Adams-Bashforth-Moulton scheme (ABM4) and mixed Eulerian-Lagrangian (MEL) method are used for the time-stepping integration of the free surface boundary conditions. A smoothing scheme, B-spline curve, is applied to both the longitudinal and transverse directions of the tank to eliminate the possible saw-tooth instabilities. When the tank is undergoing one dimensional regular motion of small amplitude, the calculated results are found to be in very good agreement with linear analytical solution. In the simulation, the normal standing waves, travelling waves and bores are observed. The extensive calculation has been made for the tank undergoing specified random oscillation. The nonlinear effect of random sloshing wave is studied and the effect of peak frequency used for the generation of random oscillation is investigated. It is found that, even as the peak value of spectrum for oscillation becomes smaller, the maximum wave elevation on the side wall becomes bigger when the peak frequency is closer to the natural frequency.

• 치과방사선
• /
• 제19권1호
• /
• pp.163-169
• /
• 1989

The purpose of this study is to investigate on the clinical and radiographic patterns of residual cyst of the jaw for early diagnosis and treatment. The auther studied 87 cases of residual cyst with regard to age, sex distribution, the site of the lesion and several radiographic features. The results were as follows: 1. The average age was found to be 42.6 years, with a range of 15 to 84 years. The incidence was highest in the third and fourth decades(50.6%) and total 87 cases consist of 47 males and 38 females. 2. The common clinical symptoms were pus discharge, swelling, pain and no symptoms was presented in 5 cases(12.5%). 3. Residual cysts were found to be 46.0% maxillary anterior region, 18.4% maxillary molar region, 17.2% mandibular molar region and to be more common in the maxilla(70.1%) than in the mandible(29.9%) 4. Most of residual cysts were unilocular type(86 cases, 98.8%), showing distinct border(62 cases, 71.3%) with smooth margin(78 cases, 89.7%). 5. The adjacent teeth showed root resorption in 13 cases(14.9%), and root divergence in 16 cases(18.4%). 6. The residual cysts extended to the nasal fossa(22 cases, 22.5%), the maxillary sinus(19 cases, 19.4%) and caused the displacement of the mandibular canal wall (11 cases, 11.2%)

• 한국주거학회논문집
• /
• 제20권2호
• /
• pp.101-108
• /
• 2009

The purpose of this study is to develop basic data for the design of the housing space for unit that factors in the sentiment of the residents by using aesthetic elements and expression method to search for the ways to design housing space for differentiated unit. The results are as follows: First, aesthetic elements in the aesthetic element in the unit housing space for unit can be classified into basic elements and detailed elements. Second, it is possible to classify into distortion, mixing, superposition and juxtaposition methods. Third, use of the 'material' for 'wall' is recommended when designing differentiated housing space by using basic elements. At this time, expression using the method of 'mixing' is effective for inducing differentiation. In particular, elements that can perceive the difference in time are mixed, to add on slight differentiation. Fourth, 'illumination' and 'material' are used when designing differentiated housing space by using detailed elements. Fifth, preference degree of the expression method is manifested differently depending on the selected elements. Lastly, this study conducted a study on the preference level of the aesthetic elements and expression method targeting the experts alone to differentiate the design of the residential space for unit.

• 한국실내디자인학회논문집
• /
• 제17권2호
• /
• pp.91-101
• /
• 2008

The purpose of this study is to suggest the design guidelines of exhibition space for conservation of collection in a museum. With the purpose of this study, examined the concept and a condition of conservation which is focused on deterioration in a exhibition space, investigated the actual condition of total 42 facilities and analyzed the specific instance which is excellent by factor of environment plan. Hereupon, the results of this study are as follows. First, exhibition space should be equipped with sufficient 'Filtering Space' before the outdoor and located central territory in a museum facility. Second, exhibition space should be partition off an area into the quality of collection, and then controlled by each of them. Third, in consideration of the annual air fluctuation of our country, the database which is adaptable for setting up the standard of temperature and RH must be prepared. Fourth, it is necessary to establish a 'Reference Exhibition Room' which is formed cellular type and a 'Garnering Exhibition Center'. Fifth, for the prevention of deterioration which is generated in exhibition space, the showcase must be high air-tight. Sixth, it is necessary to reduce a inside space of high air-tight showcase. Seventh, art-sorb is suitable for control the organic matter of collection and a except of fiber optics is not suitable for lighting of showcase. Eighth, wall-type showcase should be have air-chamber which is formed like museum storage and run over 8 hours a day.