• Journal of Biomedical Engineering Research
• /
• v.18 no.1
• /
• pp.9-16
• /
• 1997

We develop an automatic imaging matching technique for combining portal image and simulator image for improvements in localization of treatment in radiation therapy. Fusion of images from two imaging modalities is treated as follows. We archive images thxough a frame-yabber. The simulator and portal images are edge detected and enhanced with interpolated adaptive histouam equalization and combined using geometrical parameters relating the coordinates of two image data sets which are calculated using Fourier descriptors. We don't use any kind of imaging markers for patient's convenience. clinical use of this image matching technique for treatment planning will result in improvements in localization of treatment volumes and critical structures. These improvements will allow greater sparing of normal tissues and more precise delivery of energy to the desired irradiation volume.

• Journal of Korean Society for Quality Management
• /
• v.51 no.1
• /
• pp.119-129
• /
• 2023

Purpose: This study proposes a classification model for implementing condition-based maintenance (CBM) by monitoring the real-time status of a machine using acceleration sensor data collected from a vehicle. Methods: The classification model's performance was improved by applying Fourier transform to convert the acceleration sensor data from the time domain to the frequency domain. Additionally, the Generative Adversarial Network (GAN) algorithm was used to augment images and further enhance the classification model's performance. Results: Experimental results demonstrate that the GAN algorithm can effectively serve as an image augmentation technique to enhance the performance of the classification model. Consequently, the proposed approach yielded a significant improvement in the classification model's accuracy. Conclusion: While this study focused on the effectiveness of the GAN algorithm as an image augmentation method, further research is necessary to compare its performance with other image augmentation techniques. Additionally, it is essential to consider the potential for performance degradation due to class imbalance and conduct follow-up studies to address this issue.

• Journal of Information Processing Systems
• /
• v.12 no.4
• /
• pp.555-576
• /
• 2016

In the conventional clustering algorithms, an object could be assigned to only one group. However, this is sometimes not the case in reality, there are cases where the data do not belong to one group. As against, the fuzzy clustering takes into consideration the degree of fuzzy membership of each pixel relative to different classes. In order to overcome some shortcoming with traditional clustering methods, such as slow convergence and their sensitivity to initialization values, we have used the Harmony Search algorithm. It is based on the population metaheuristic algorithm, imitating the musical improvisation process. The major thrust of this algorithm lies in its ability to integrate the key components of population-based methods and local search-based methods in a simple optimization model. We propose in this paper a new unsupervised clustering method called the Fuzzy Harmony Search-Fourier Transform (FHS-FT). It is based on hybridization fuzzy clustering and the harmony search algorithm to increase its exploitation process and to further improve the generated solution, while the Fourier transform to increase the size of the image's data. The results show that the proposed method is able to provide viable solutions as compared to previous work.

• Applied Microscopy
• /
• v.44 no.4
• /
• pp.138-143
• /
• 2014

Transmission electron microscope (TEM) is an excellent tool for studying the structure and properties of nanostructured materials. As the development of $C_s$-corrected TEM, the direct analysis of atomic structures of nanostructured materials can be performed in the high-resolution transmission electron microscopy (HRTEM). Especially, fast Fourier transform (FFT) technique in image processing is very useful way to determine the crystal structure of HRTEM images in reciprocal space. To apply FFT technique in HRTEM analysis in more reasonable and friendly manner, we made a new circular region of interest (C-ROI) FFT script and tested it for several HRTEM analysis. Consequentially, it was proved that the new FFT application shows more quantitative and clearer results than conventional FFT script by removing the streaky artifacts in FFT pattern images. Finally, it is expected that the new FFT script gives great advantages for quantitative interpretation of HRTEM images of many nanostructured materials.

• Korean Journal of Optics and Photonics
• /
• v.21 no.3
• /
• pp.91-96
• /
• 2010

The size of a reconstructed image depends on the reconstruction distance and wavelength. The double fourier transform method is proposed to eliminate the dependence on the reconstruction distance and wavelength. We can get a fixed reconstructed image size by using the double fourier transform method. Two wavelength digital holography is proposed to measure the step height, which is larger than a single wavelength. The two image size of different wavelength holograms should be the same in order to apply two wavelength digital holography. We use two wavelength digital holography and double fourier transforms to measure the step height. The measured data were reasonable and we found that the double fourier transform is useful in two wavelength digital holography.

• International Journal of Contents
• /
• v.5 no.2
• /
• pp.26-31
• /
• 2009

This paper describes a new image watermarking scheme invariant to rotation, scaling and translation (RST) attacks. For obtaining the invariance properties we propose to present an image of watermark by wedges and rings to convert its rotation to shift and then utilize the shift invariance property of the Direct Fourier Transform (DFT). But in contrast to conversional schemes based on the Fourier-Mellin transform (FMT), we do not use a log-polar mapping (LPM). As a result, our scheme preserves high quality of original image since it is not underwent to LPM For withstanding against JPEG compression, noise addition and low-pass (LP) filtering attacks a low frequency watermark is embedded into middle frequencies of the original image. Experiments with various attacks show the robustness of the proposed scheme.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.999-1000
• /
• 2008

Image Registration is used many works in image processing widely. But It is difficult to find the accuracy informations such as translation, rotation, and scaling between images. This paper proposes an algorithm that Fourier based image registration using the pyramid edge detection and line fitting. It can be estimated the informations by each sub-pixels. The proposed algorithm can be used for image registrations which high efficiency is required such as GIS, or MRI, CT, image mosaicing, weather forecasting, etc.

• International Journal of Precision Engineering and Manufacturing
• /
• v.9 no.4
• /
• pp.45-50
• /
• 2008

The Fourier-Mellin transform is the theoretical basis for the translation, rotation, and scale invariance of an image. However, its implementation requires a log-polar map of the original image, which requires logarithmic sampling of a radial variable in that image. This means that the mapping process is accompanied by considerable loss of data. To solve this problem, we propose a dual log-polar map that uses both a forward image map and a reverse image map simultaneously. Data loss due to the forward map sub-sampling can be offset by the reverse map. This is the first step in creating an invertible log-polar map. Experimental results have demonstrated the effectiveness of the proposed scheme.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.2
• /
• pp.69-79
• /
• 1994

The conventional machine vision system which has uniform rectangular grid requires tremendous amount of computation for processing and analysing an image especially in 2-D image transfermations such as scaling, rotation and 3-D reconvery problem typical in robot application environment. In this study, the imaging system with nonuiformly distributed image sensors simulating human visual system, referred to as Ploar Exponential Grid(PEG), is compared with the existing conventional uniform rectangular grid system in terms of image resolution and computational complexity. By mimicking the geometric structure of the PEG sensor cell, we obtained PEG-like images using computer simulation. With the images obtained from the simulation, image resolution of the two systems are compared and some basic image processing tasks such as image scaling and rotation are implemented based on the PEG sensor system to examine its performance. Furthermore Fourier transform of PEG image is described and implemented in image analysis point of view. Also, the range and heading-angle measurement errors usually encountered in 3-D coordinates recovery with stereo camera system are claculated based on the PEG sensor system and compared with those obtained from the uniform rectangular grid system. In fact, the PEC imaging system not only reduces the computational requirements but also has scale and rotational invariance property in Fourier spectrum. Hence the PEG system has more suitable image coordinate system for image scaling, rotation, and image recognition problem. The range and heading-angle measurement errors with PEG system are less than those of uniform rectangular rectangular grid system in practical measurement range.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.11a
• /
• pp.89-96
• /
• 2006

To estimate the manufacturing district and generation of ancient paper as a cultural property, fiber orientation is one of the criteria. Image analysis using fast Fourier transform with suitable modifications was demonstrated to be an effective means to determine angle and intensity of fiber orientation as a nondestructive method. Binarization process of microscopic images of paper surface and precise calculation for average Fourier coefficients as an angular distribution by linear interpolation were newly introduced in the procedures to improve the accuracy. This analysis method was applied to digital optical micrographs of paper surfaces. Korea and Japanese traditional hand making papers were well distinguished. Korea and Japanese papers made in the traditional ways showed its own characteristic orientation behavior in accordance with the motion of a bamboo wire.