• 한국도로학회지:도로
• /
• v.2 no.3
• /
• pp.102-102
• /
• 2000

• International Journal of Highway Engineering
• /
• v.15 no.3
• /
• pp.85-92
• /
• 2013

PURPOSES: The purpose of this paper is to estimate expected effects on traffic operational and economic aspects of 2+1 roads application in Korea. METHODS : Micro simulation study using VISSIM 5.0 was used to analyze the operation efficiency of 2+1 roads compared to two-lane highways and four-lane highways. Some scenarios for various traffic volumes were set up in order to analyze the effect of 2+1 roads under various traffic situations. Also imaginary road networks were set up for each type of roads. The MOEs to measure the operation efficiency were selected with average travel speed and delay. For analyzing economic effect of 2+1 roads, construction cost of a specific imaginary 2+1 road was compared to construction cost of a four-lane highway with same conditions. RESULTS: The results of study show that a 2+1 road is more effective with 19 percents higher average travel speed and 39 percents lower average delay than a two-lane highway. In the economic analysis, construction costs to construct a 2+1 road are saved as approximately 26.4~40.7 percents when compared to construction of four-lane highway. CONCLUSIONS: It can be concluded that 2+1 roads can improve the traffic operational level of service for two-lane highways and 2+1 roads can be applied as an effective design alternative for higher-volume two-lane highways in Korea.

• 한국도로학회:학술대회논문집
• /
• 2010.09a
• /
• pp.271-276
• /
• 2010

• International Journal of Highway Engineering
• /
• v.16 no.5
• /
• pp.173-182
• /
• 2014

PURPOSES : The purpose of the study is to a) explore the operating speed of trucks on rural highways affected by road geometry, and thereby b) develop a predictive model for the operating speed of trucks on rural highways. METHODS : Considering that most of the existing studies have focused on cars, the current study aimed to predict the operating speed of trucks by conducting linear regression analysis on the speed data of trucks operating on the linear-curved-linear portions of the road as a single set. RESULTS : The operating speed in the plane curve portion increased with the length of the curve, and decreased with a lower vertical grade and a smaller curve radius. In the straight plane portion, the operating speed increased with a larger curve radius(upstream), and decreased with an increase in the change of the vertical grade, depending on the length of the vertical curve. CONCLUSIONS : This study developed estimation models of truck for operational speed and evaluated the degree of safety for horizontal and vertical alignments simultaneous. In order to represent whole area of the rural highway, the models should be ew-analyzed with vast data related with road alignment factor in the near future.

• Journal of Korean Society of Transportation
• /
• v.28 no.5
• /
• pp.141-153
• /
• 2010

The study is about the development of operating speed prediction models aimed for an evaluation of design consistency of four lane rural roads. The main differences of this study relative to previous research are the method of data collection and classification of road alignments. The previous studies collected speed data at several points in the horizontal curve and approaching tangent. This method of collection is based on the assumption that acceleration and deceleration only occurs at horizontal tangents and the speed is kept constant at horizontal curves. However, this assumption leads to an unreliable speed estimation, so drivers' behavior is not well represented. Contrary to the previous approach, speed data were collected with one and data analysis using a speed profile is made for data selection before building final models. A total of six speed prediction models were made according to the combination of horizontal and vertical alignments. The study predicts that the speed data analysis and selection for model building employed in this study can improve the prediction accuracy of models and be useful to analyze drivers' speed behavior in a more detailed way. Furthermore, it is expected that the operating speed prediction models can help complement the current design-speed-based guidelines, so more benefits to drivers as real road users, rather than engineers or decision makers, can be achieved.

• Journal of Korean Society of Transportation
• /
• v.24 no.6 s.92
• /
• pp.33-43
• /
• 2006

This research is to the selection of optimal probability distribution as well as the estimation for design hourly factor in consideration of traffic characteristic, such as road function, lane number and AADT. To accomplish the objectives, we are applied to various probability distribution using traffic data that observed at permanent traffic count points in 2005. The parameters or the selected 14 probability distribution were estimated based on the method of maximum likelihood and the validity condition of the estimated parameter The goodness-of-fit test, such as chi-square test. was performed as well as the estimation of design hourly factor. As a result, An appropriate distributions of each case were selected : Pearson V for two lane of rural roads, LogLogistic for the four lane of rural roads, LogLogistic for the urban roads, Extreme value for recreation roads. And optimal K factor are as following : $0.1{\sim}0.2 $ for two lane of rural roads, $0.09{\sim}0.14$ for the four lane of rural roads. $0.07{\sim}0.13$ for the urban roads, $0.1{\sim}0.2$ for recreation roads.

• International Journal of Highway Engineering
• /
• v.10 no.4
• /
• pp.53-63
• /
• 2008

Even though accident frequencies in roadway segments have been decreasing since 2000, there has been increasing the number of vehicle crashes at intersections. Due to this increase, safety problems at intersection recently started to be regarded as significant issues. The purpose of this study is to analyze the effects of road conditions, traffic operational conditions, and other influencing condition on intersection safety. Then a traffic accident frequency prediction model to evaluate the safety at intersections was developed based on the correlations between influencing factors and vehicle crashes. In this research, critically significant factors affecting vehicle crashes at rural four-legs signalized intersections were investigated. It was found that Poisson regression was the best fit method to developing a accident frequency modeling using the collected data in this study. Through this study, it was concluded that exclusive left turn lane, crosswalk, posted speed, lighting, angle, and ADT are significant influencing factors on the intersection safety.

• Journal of Korean Society of Transportation
• /
• v.24 no.4 s.90
• /
• pp.55-65
• /
• 2006

The ratio of Pedestrians in traffic accident fatality takes up 43% in Korea, which is 2.5 times as much as OECD's average. The traffic accidents features by road type shows that the fatality of the national highway posts the highest due to the accidents of pedestrians. Accordingly, the establishment of safety facilities for pedestrians is expected to increase on the rural roads for the prevention of pedestrian accidents. However, studies on pedestrians have been mainly focused on urban intersections. In Particular, studies on estimating the effectiveness of safety features for pedestrians are very poor. Thus, in this study. the Pedestrian accident probability model on four lane national highway was developed by using logit model. Also, this study analyzed and proposed the effect of facilities as a relative risk by using an odds ratio. As a result of the analysis, the Improvement of sight distance, installing sidewalks and lightings were proven effective alternatives for reducing the pedestrian accidents.

• Journal of Korean Society of Transportation
• /
• v.23 no.7 s.85
• /
• pp.35-42
• /
• 2005

Few studies have been carried out to find out the interaction of design speeds, operating speeds, and posted speeds though they have a complementary relationships. As an attempt to find the relationships, this study measured the speeds of the free flowing vehicles at four lane rural highways. In comparison of 95th percentile speeds and inferred design speeds determined from the road design manual with the geometric features of each sites, operating speeds were constantly higher than the inferred design speeds at the sites where the inferred design speed is under 110km/h. and the reverse situation was observed at the sites where the inferred design speed is over 130km/h. In the comparison of operating speeds and posted speeds. the range of the 85th percentile speeds at the sites where posted speeds is 80km/h was distributed from 95km/h to 110km/h. and the range was distributed from the 105km/h to the 120km/h at the sites where posted speeds is 90km/h. Multiple regression analysis was used to develop prediction equations for mean. 85th. and 95th percentile speeds at approach and curve midpoint locations. At the midpoint, only posted speeds influenced the mean, 85th. At the approach locations, the mean, 85th, 95th percentile speeds were influenced by posted speeds and length of the approach tangent.

• Journal of Korean Society of Transportation
• /
• v.23 no.7 s.85
• /
• pp.159-163
• /
• 2005

The propriety between suppliers and demanders in geometric design is very important. Although the final purpose of constructing roads is to concern about the driver s comfort, unfortunately, it has not been considered so far. We've considered the regularity and quickness in considering driver's comfort but there should be considered the safety for the accident as well. If drivers are appeared to be more speeding than designer's intention, there will be needed some supplements to increase the safety rate for the roads. Even if both an upward and downward section are supposed to exist at the same time for solid geometry of the roads like this, it is true that the recent design for the 3-D solid geometry section has been done as flat 2-D and the minimum plane curve radius and the maximum cant have been decided just by calculating without considering operating speed between an upward and downward section at the same point. In this investigation, thus, I'd like to calculate the safety of the cant by considering the speed features of the solid geometry for the first lane of four lane rural roads. To begin with, we investigated the driving speed of the car, which is not been influenced by a preceding car to analyze the influence of the geometrical structure by using Nc-97. Secondly, we statistically analyzed the driving features of the solid geometry after comparing the 6 sections, that is, measuring the driving speed feature at 12 points and combining the influence of the vertical geometry and plane geometry to the driving speed of the plane curve which was researched before. Finally, we estimated the value of cant which considers the driving speed not by using it which has applied uniformly without considering it properly, though there were some differences between a designed speed and driving speed through the result of the basic statistical analysis but by introducing the new safety rate rule, a notion of ${\alpha}$. As a result of the research, we could see the driving features of the car and suggest the safety rate which considers these. For considering the maximum cant, if we apply the safety rate, the result of this experiment, which considers 3-D solid geometry, there'll be the improvement of the driver's safety for designing roads. In addition, after collecting and analyzing the data for the road sections which have various geometrical structures by expanding this experiment it is considered that there should be developed the models which considers 3-D solid geometry.