• Restorative Dentistry and Endodontics
• /
• v.13 no.1
• /
• pp.161-171
• /
• 1988

The purpose of this study was to examine the morphological changes of different simulated canals according to the preparation procedures. With the use of clear casting resin, simulated straight and curved canals were created so that canal preparation procedures could be directly visualized and compared. Thirty clear polyester casting resin blocks which contained four simulated canals divided into three groups; Group A($0^{\circ}$), Group B($15^{\circ}$), and Group C($30^{\circ}$). In each block, 3 canals were prepared different preparation techniques, which were conventional method, step-back method, and giromatic filing. But, one canal was not prepared as a control group. The results were as follows: 1. There was no difference on canal shape among three canal preparation methods in straight canals (Group A). 2. When conventional method and Giromatic filing were used in curved canals (Group B, C), elbow, zip and hour-glass shape were formed in apical third. 3. When conventional method and Giromatic filing were used in curved canals (Group B, C), tear-drop appearance developed at the site of the canal exit in curved canals. 4. In curved canals (Group B, C), file tend to straighten within the canal. 5. There was no difference on canal shape according to curved angle in step-back method (p > 0.1). But there was significant difference on canal shape according to curved angle in conventional method and Giromatic filing (p < 0.001). 6. Step-back method was significantly more effective than conventional method and Giromatic preparation in morphologic aspects of apical third of original canals.

• Proceedings of the KACD Conference
• /
• 2001.11a
• /
• pp.588.1-588
• /
• 2001

The purpose of this study was to compare the root canal shaping ability of four nickel-titanium rotary instruments. Forty eight simulated curved root canals were instrumented in plastic with the Crown-down technique using the $ProTaper^{TM}$ , the ProFile, the $GT^{TM}$, and the Quantec. Canals were instrumented until apical canal were up to size 30 by one operator. Each instrument was used only once and instrumentation time was measured.(omitted)

• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.388-395
• /
• 1997

Maintaining the original canal path during instrumentation is a challenge in narrow curved canals. This study compared the maintenance of the original canal path of curved root canals during instrumentation with two kinds of stainless steel K-files(Brassler USA & Mani Japan), K-flexofiles(Maillefer Swiss) and Ni-Ti files(Brassler USA, Savannah, GA) using circumferential filing technique to # 40 MAF on 60 extracted human molars. Buccal and mesial canals with minimal initial curvature of 20 degrees were used. The maximal initial curvature was 41.5 degrees. Sixty curved canals divided into four groups according to file type(Group 1 : Ni-Ti file, Group 2 : K-flexofile, Group 3: K-file(Brassler), Group 4 : K-file(Mani)). Radiographs of canals were obtained before and after canal shaping. And postoperative radiographs were compared with preoperative radiographs using superimposition method. Data analysis was performed using Covariance analysis and paired-comparison test. The results observed were as follow ; 1. The angle of curvature was better maintained with Ni-Ti file than with stainless steel files. (p<0.01) 2. There was no significant difference in maintaining canal curvature between K-flexofile, Brassler$^{(R)}$ K-file and Mani$^{(R)}$ K-file, although there was some differences in mean values of postoperative canal curvature. 3. Paired-comparison t test revealed significant differences within each of the three stainless steel file types when comparing the mean differences before and after instrumentation, but no significant differences were observed within Ni-Ti file group.

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.671-684
• /
• 1995

The purpose of this study was to compare the apical sealing ability, overfilling and obturation of lateral canals using two gutta-percha techniques: Thermafil obturators and cold lateral condensation. Eighty numbered epoxide blocks with one major and five lateral canals were divided into four experimental groups and obturated according to experimental groups. Four experimental groups were as follows: Group 1 : Filling with Thermafil plastic obturators and sealer(ThermaSeal) Group 2 : Filling with Thermafil plastic obturators only, without sealer(ThermaSeal) Group 3 : Fillng using lateral condensation with sealer(AH-26) Group 4 : Fillng using lateral condensation without sealer(AH-26) All the blocks were stored in 100% relative humidor at room temperature for 7 days. Each block was placed in centrifuge tube filled with India ink, and then centrifuged for 20 minutes at 3,000 rpm. Apical leakage was measured from the apical foramen to the most coronal level of dye penetration in millimeter under a stereoscope. The length of gutta-percha and sealer in each of the lateral canals was measured, too. The presence or absence of overfilling of gutta-percha and sealer was recorded. The data was analyzed by one-way ANOVA. The obtained results were as follows: l. Apical dye leakage was almost: not occurred in Group Willed with Thermafil and sealer) and Group 3(filled using lateral condensation with sealer), and there was no significant difference in linear leakage between two groups(p>0.01). 2. In both Thermafil and lateral condensation groups, linear leakage of Group I, 3(filled with sealer) was less than that of Group 2, 4(filled without sealer), and there was no significant difference in linear leakage between Group 1, 2, 3(p> 0.01). 3. Overfilling during obturation of Group 1, 2(filled with Thermafil) was more than Group 3, 4(filled using lateral condensation), and there was no significant difference between groups(p> 0.05). 4. Groups filled with Thermafil had significantly more gutta-percha than groups filled using lateral condensation in all lateral canals(p <0.01), the total length of gutta-percha and sealer found in all lateral canals were similar in Group 1 and Group 3.

• Restorative Dentistry and Endodontics
• /
• v.22 no.2
• /
• pp.731-738
• /
• 1997

A retrospective in vivo study of endodontically treated mandiblar molars was conducted. The radilographs and clinical records of mandibular molars that had been treated endodontically in the Dental hospital of Yonsei University from 1986 to July 1997 were reviewed and categorized. A total of 1751 cases were studied and following results were obtained. 1. The number of root canals in mandibular first permanent molar in a Korean population revealed three in 53.2 %, four in 23.0 %, two in 18.4 %, C-shaped canal in 5.0 %, and one in 0.4 %. 2. In mandibular second molar, three canals was observed in 53.2 %, four in 22.2 %, two in 14.9%, C-shaped canal in 9.1 %, and one in 0.6%. 3. In the results of the percentage of 4 canals of mandibular first molars at various age, before age 20, 37.7 % was obtained whereas 19.3 % after 30. 4. 7.94 % of mandibular first molars examined were found to have three roots. 5. The mandibular second molar had C-shaped canals in 9.1 %.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.27 no.4
• /
• pp.31-41
• /
• 1985

This paper compares the estimated total construction and maintenance costs for irrigation canals in six irrigation districts near Pyongtaek. Three conventional canal types were considered: concrete bench flumes, concrete-lined canals, and earth canals. The total expenses for each type were grouped to four catagories: the net construction, land acquisition, maintenance, and other expenses. The construction costs included the assumed costs for conveyance losses from each type of canals. The results from this study support earlier studies that the bench flumes are economically feasible. Initially cheaper conveyance systems like concrete-lined and earth canals demand 'higher maintenance costs and thus, their total expenses are summed to exceed those for the bench flumes within a few years following the construction. Banch flumes are economically justifiable for the main canals of the studying districts. Sensitivity analyses were executed to evaluate the relative importance of each expense to the total cost. The analyses show that total expenses very significantly with the change of the following costs: cost for conveyance losses, net construction, maintenance, and land acquisition, in that order However, other expenses contribute little if not at all to the total. The results indicate that bench flumes should be adopted as main canal structures for most irrigation districts in the Republic.

• Journal of Korean Society of Rural Planning
• /
• v.9 no.3 s.20
• /
• pp.47-52
• /
• 2003

The purpose of this study is to evaluate the satisfaction level and to analyze the factors in the environment friendly consolidation canals. In this study, the survey consists of four parts, such as the actual status of environment friendly canals, satisfaction level for each items, overall satisfaction level and the personal features of the users. Total 128 samples out of 140 respondents were used for the final analysis. Analysis of the satisfaction level were fulfilled to survey results such as the basic statistics and the correlations of variables, in addition, dispersion analysis for two user groups were carried out. Function of canal, water quality, landscape, and convenience facilities were chosen as independent variables in the model. Residents in Yeoju area were satisfied with water quality, water quantity and the function of canal. And residents of Yeonggwang area were satisfied with the convenience facilities and the function of the newly consolidated canal.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.50 no.1
• /
• pp.13-21
• /
• 2008

Water losses in irrigation canals are mainly estimated as the sum of conveyance and delivery water loss. The losses occur via the evaporation, infiltration, gate operation and water distribution processing. Recently, the study regarding these water losses are not satisfactory enough, also delivery water loss has not been mainly considered on field design. The objective of this study is to investigate and analyze the volume of water loss in irrigation canals considering condition of actual farm land. A field measurement was performed at four research sites, which are managed by Korea Rural Community & Agriculture Corporation, to evaluate conveyance and delivery water loss for 2 years. The measurement was performed by canal type, size and designed flow using the inflow-outflow method at a major points such as start and end of each canal, derivation point of canal and inlet of paddy fields. Results of this study showed that water loss ratio in lateral canals was bigger than that of main canal unlike current design standard and the loss decrease as flow increase. The total of water loss ratio including conveyance and delivery water loss in several irrigation canals ranged between 33.25 and 45.0%.

• Restorative Dentistry and Endodontics
• /
• v.18 no.2
• /
• pp.377-386
• /
• 1993

The purpose of this study was to evaluate the disinfection efficacy of root canal irrigation method and irrigation solution in infected root canals. Access cavity were prepared in single-rooted extracted human teeth and each canals were prepared with step-back method and sterilized with ethylene oxide gas. Prepared teeth were experimentally inoculated in the canals for 30 minutes with four aerobes(Streptococcus mutans, Stapylococcus aures, Streptococcus sanguis, and E. coli) and two anaerobes(Streptoccus intermedius, and Clostrium perfringens). Normal saline, 3% $H_2O_2$, and 3% NaOCl were used as irrgation solutions. And root canals were irrigated with each irrigation solutions manually with disposible syringe or ultrasonic instument. (Apoza Uitrasonc, Taiwan). The irrigation effect on the eradication of S. aures and S. intermedius with normal saline was not similar between manual method and ultrasonic method. No significant differences were observed in the eradication of E. coli and C. perfringens among the irrigation solution and irrespective of the irrigation methods. In S. aurues and S. mutans, there was somewhat different eradication effect according to irrigation solutions, but there was no significant difference between manual method and ultrasonic methods. These results suggest that ultrasonic irrigation method with saline is more effective in some strains than manual irrigation.

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.780-788
• /
• 1995

The purpose of this study was to compare the apical seal following root canal shaping by different methods. From fourty extracted mandibular 1st and 2nd molars, fourty mesial roots whose canals have some degree of curvature were selected. The mesiobuccal root portion including mesiobuccal portion of a crown was sectioned in each molar. After access cavity preparation for the mesiobuccal canal, working length was determined with # 10 K-file. The sectioned roots were implanted in acrylic resin block and randomly divided into four groups. The canals of group I were shaped by step-down/balanced force, group II by stepdown/step-back, group III by step-back and group IV by conventional method. All of the shaped canals were obturated by Thermafil method and access cavities were filled with IRM. The roots were removed from acrylic resin block and placed in 100 % humidity for 7days. Except the root surfaces of apical 2mm, the root surfaces were nail-varnished 3 times. After the roots were placed in 700 torr vacuum pressure for 15 minutes, they were immersed in 2% methylene blue solution for 4 days. Nail varnishes were removed with acetone. After that, the roots were decalcified in 5 % nitric acid and dehydrated with alcohol series. Transparent specimens were made by methyl salicylate and the quality of apical seal was assessed by measuring the leakage linearly. The results were as follows. 1. The leakage in canals shaped by step-down/balanced force method was significantly less than that in canals shaped by step-back method(P<0.05) and was less but not statistically than that in canals shaped by step-down/step-back method (P>0.05). 2. The leakage in canals shaped by step-down/step-back method was less than that in canals shaped by step-back method, but there was no statistical significance(P>0.05). 3. The leakage in canals shaped by conventional method was significantly more than that in canals shaped by step-down/balanced force, step-down/step-back and step-back method (P<0.05).