• Journal of the Korean Society of Marine Environment & Safety
• /
• v.5 no.1
• /
• pp.47-58
• /
• 1999

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous contaminants in coastal marine environment. PAHs enter estuarine and nearshore marine environment via several routes such as combustion of fossil fuels, domestic and industrial effluents and oil spills. In August of 1997, sediment and mussels (Mytilus edulis) were collected at 6 sites near Kori nuclear power plant in order to analyze the PAH content by HPLC with uv/vis detection. The concentrations of 15 PAH in sediment ranged from < 1 to 5,900 ppb ( mean 173.5$\pm$99.7 ppb), and in mussels, from < 0.5 to 4,125 ppb (mean 105$\pm$60.5 ppb). Compared with other studies world over, the concentrations of carcinogenic PAHs were relatively low in both sediment and mussels from the intertidal zone of Kori. This study presents preliminary data for the PAH levels in sediment and mussels from the intertidal zone of Kori, and the data will hopefully be utilized for the assessment of oil pollution in the Southeast East Sea, Korea (especially for the PAHs).

• Journal of the Korean Solar Energy Society
• /
• v.24 no.4
• /
• pp.1-10
• /
• 2004

In view of global environmental problems and resource exhaustion, we must develop new energy resources that are abundant and provide substitutes for fossil fuels. Renewable energies, such as solar, are ideal because they are clean, inexhaustible, and available everywhere in the world. Photovoltaic(PV) system, in general, are operated as a stand-alone, grid-tied, or hybrid system. Many of the stand-alone PV systems are installed. Although the pre-installation cost of PV system is high, it poorly has been operated due to the absence of optimal management standards. Therefore a study on the performance of PV system is important for the system design and maintenance. In this paper a photovoltaic lighting system was resigned according to load consumption. Then a PV lighting system which used electrodeless lamp as a load was installed. In order to investigate the system operating characteristics we've added a monitoring system to the PV lighting system. The monitoring system using the LabVIEW program regularly checks the operation of the PV lighting system and records the system data. According to the system data, the stability and availability of the PV lighting system were evaluated.

• New & Renewable Energy
• /
• v.9 no.1
• /
• pp.33-43
• /
• 2013

The objective of this paper is to provide a review on the latest development on the main initiative and approaches for the sustainability criteria for biofuels. A large number of national and international initiative lately experienced rapid development in the review of the biofuels targets announced in the European Union (EU), United States (US) and other countries worldwide. The global biofuel targets are likely to have a strong impact on land use and agricultural markets. Although biofuels production provides new options for using agricultural crops, there are environmental, social and economic concerns associated with biofuel production. The diversity of feedstock, large number of biofuels pathway an their complexity lead to a high uncertainty over the greenhouse gas (GHG) performances of biofuels, in terms of GHG emission reductions compared to the fossil fuels, expecially if land use change is involved. This paper describes an overview of current status of ongoing certification initiative in Europe and worldwide for biofuels sustainability. It also provides mandatory requirements as part of an sustainability scheme in EU, United Kingdom, US and international approaches and should be reviewed to introduce based on global trends in Korea.

• Journal of Soil and Groundwater Environment
• /
• v.14 no.6
• /
• pp.95-100
• /
• 2009

Strategies incorporating more efficient energy use into remediation of contaminated sites, which are those of important elements in green remediation, are developed and discussed in this work. Firstly, from several case studies of remedial actions in Korea, thermal desorption and/or in-situ method including pump-and-treat were found energy intensive and soil washing less intensive. In order to use energy efficiently and minimize use of fossil fuels during land revitalization process, it is necessary to optimize energy intensive systems, to use low energy remediation systems (such as bioremediation), and to integrate renewable energy sources. Furthermore, economic incentive systems such as subsidy need to be adopted if renewable energy sources are incorporated into remediation of contaminated sites.

• Journal of Forest and Environmental Science
• /
• v.24 no.3
• /
• pp.151-154
• /
• 2008

Dramatic price increases of fossil fuels and the economic development of emerging nations accelerates the transformation of forest lands into monocultures, e.g. for biofuel production. On this account, cost efficient methods to enable the monitoring of land resources has become a vital ambition. The application of remote sensing techniques has become an integral part of forest attribute estimation and mapping. The aim of this study was to evaluate the potentials of the kNN method by combining terrestrial with remotely sensed data for the development of a pixel-based monitoring system for the small scaled mosaic of different land use types of the off-reserve forests of the Goaso forest district in Ghana, West Africa. For this reason, occurrence and distribution of land use types like cocoa and non-timber forest resources, such as bamboo and raphia palms, were estimated, applying the kNN method to ASTER satellite data. Averaged overall accuracies, ranging from 79% for plantain, to 83% for oil palms, were found for single-attribute classifications, whereas a multi-attribute approach showed overall accuracies of up to 70%. Values of k between 3 and 6 seem appropriate for mapping bamboo. Optimisation of spectral bands improves results considerably.

• Journal of Hydrogen and New Energy
• /
• v.28 no.6
• /
• pp.704-711
• /
• 2017

Korea, which has a high dependency on energy imports, is greatly affected by fluctuations in international oil prices. In order to offset these effects, various policies such as 'diversification of energy sources' and 'energy mix' are being pursued. Renewable Fuel Standard (RFS) is a policy promoted for this purpose, and a compulsory mixing system is applied only to the diesel. In order to reduce dependence on fossil fuels in various countries, they are concentrating on the dissemination of bio-alcohol as well as bio-diesel, and commercialization through various verification. In this study, evaluation of domestic materials and vehicles was carried out to promote domestic bio alcohol fuel. We analyzed the fuel characteristics of domestic quality standard items by mixing them with gasoline of automobile at a certain mixing ratio (0%, 3%, 6%, and 10%).

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1279-1280
• /
• 2008

A serious problem of the 21st century is the supply of energy resources. Reserves of fossil fuels are facing depletion: renewable energy resources must be developed in this era. Dye sensitized solar cells(DSC) have been very economical and easy method to convert solar energy to electricity. DSC can reach low costs in future outdoor power applications. However, to commercialize the DSC, there are still many shortages to overcome. When the DSC is commercialized in the near future, the productivity is an important factor. In the process of soaking in a dye, it usually takes 12${\sim}$24 hours. In this study, we varied the dye coloring temperature from 0$^{\circ}C$ to 60$^{\circ}C$. At the temperature of 40$^{\circ}C$, DSC cell showed the best performance. We also conducted the time variant experiment to reduce the manufacturing time. Counter electrode surface of DSC is deposited by RF magnetron sputtering under the conditions of Ar $2.8{\times}10^{-3}torr$, RF power of 120W and substrate temperature of 100$^{\circ}C$.

• Journal of the Korean Society of Safety
• /
• v.31 no.1
• /
• pp.139-147
• /
• 2016

Nuclear energy is considerably cheap and clean compared to other fossil fuels. Yet, there are rising safety concerns of nuclear power plants including the possibility of radiation releasing nuclear accidents. In light of the Fukushima nuclear crisis in 2011, Japan has been re-evaluating their existing energy policies and increasing the share of alternative energy. This paper first tracks the major historical changes of energy policy in Japan by time period. Next, energy security, reignited concerns and alternative energy are covered to examine Japan's energy security situation and its transition after the Fukushima disaster. Lastly, a short survey based on thematic analysis was conducted in South Korea and Japan to understand the public awareness of nuclear. This paper postulates that the case of Fukushima will contribute to establish and operate a safe-future nuclear program in South Korea, given that the country is not only geographically neighbouring Japan but also the world's fourth largest producer of nuclear energy.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.2
• /
• pp.301-305
• /
• 2010

Cutting procedures where qualities are determined by various demand factors largely influences shipbuilding productivity. Particularly, defects in cutting shapes and cutting surface results in delay for post shipbuilding stages such as in welding and assemblage lines which could become factors for reduced economic viability of the project. Existing cutting procedures utilize fossil fuels such as propane or ethylene as the main fuel component and these methods applied particularly to ship plate cutting gives relatively slow cutting speed and generates large quantities of harmful and sometimes poisonous polluting fumes of which warrants an urgent need to look for alternative cutting methods. Recent introduction of hydrox gas generated by electrically dissociating water into hydrogen and oxygen components to be utilize as an alternative cutting fuel has resulted not just in visible improvement on cutting quality and speed over the existing methods but it has also been welcomed as an environmentally friendly clean fuel source. This paper has been prepared to serve as the basis for accommodating this environmentally friendly hydrox gas cutting method into actual working environment by observing and recording hydrox gas cutting thermal characteristics.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.14
• /
• pp.349-370
• /
• 2000

The environmental problems such as global climate change, global waming, ozone depletion, environmental pollution have been caused by the rapid economic growth, increasing in use of fossil fuels for industrialization and scientific technology development. Especially human activities are significantly altering the atomosphere's composition and its radiative properties. To Stabilize greenhouse gas concentrations in the atmosphere at a level that would prevent dangerous anthropogenic interference with the climate system, the international community adopted the UN Framework Convention on Climate Change in 1992 and Kyoto protocol in 1997. Also to protect ozone layer the international community adopted the Vienna Convention for the Protection of the Ozone Layer in 1985, and the Montreal Protocol on Substances that Deplete the Ozone Layer in 1987. To achieve global environmental objectives, some multilateral environmental agreements includes trade regulation. For example, Montreal Protocol includes the provisions to regulate the world trade of the sudstances which might destroy ozone layer. However Kyoto Protocol has no provisions to regulate trade and is not in force yet. Although there is no trade regulation article in Kyoto Protocol, the international world trade will be influenced by limitation and reduction of CO2 and strengthening the CO2 emission standard for import good. For example Korean car industy agreed with EU to reduce CO2 emission from new passenger car and Korean Semiconductor industry agreed with WSC(World Semiconductor Council) to reduce PFCs in 1999.