• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1996년도 제6회 학술강연회논문집
• /
• pp.197-205
• /
• 1996

A combined extrusion process studied here consists of forward and backward extrusion, and it is formed in single operation. The metal flow involved in the operation has appeared to be difficult to analyze accurately because of mixed directions of the flow. In this study, conventional two operations of a forward and a backward extrusions is transformed into one operation of mixed extrusion. A process designed by an industry expert is simulated by the rigid-plastic finite element method to investigate the metal flow and defects. In addition to the FEM simulation, experimental analysis has been carried out to confirm the design in industry, which includes material characterization, preliminary expriment, and whole experimental forming operation. The experimental results show that warm forming of extrusion is more desirable than cold working and hot forming in view of grain growth. Also two conditions of lubrication between workpiece and die has been investigated.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 1998년도 추계학술대회 및 정기총회
• /
• pp.120-123
• /
• 1998

In animating an articulated entity with motion capture data, especially when the reconstruction is based on forward kinematics, there could be large discrepancies at the end effector. The small errors in joint angles tend to be amplified as the forward kinematics positioning progresses toward the end effector. In this paper, we present an algorithm that enhances the motion capture data to reduce positional errors at the end effector. The process is optimized so that the characteristics of the original joint angle data is preserved in the resulting motion. The frames at which the end-effector position needs to be accurate are designated as“keyframes”(e.g. starting and ending frames). In the algorithm, corrections by inverse kinematics are performed at sparse keyframes and they are interpolated with a cubic spline which produces a curve best approximating the measured joint angles. The experiment proves that our algorithm is a valuable tool to improve measured motion especially when end-effector trajectory contains a special goal.

• 한국통신학회논문지
• /
• 제40권4호
• /
• pp.750-759
• /
• 2015

국방 시스템 분석에서 순 방향 시뮬레이션은 주로 전장 환경에 주어진 국방 시스템의 공학 제원이나 운용 전술을 바탕으로 이에 대응하는 체계 효과도를 분석하는 과정에 활용된다. 이러한 순 방향 시뮬레이션 과정은 다양한 교전 시나리오에 대한 전투 결과를 분석하기에는 용이하나, 목표 효과도를 달성하기 위한 국방 시스템의 요구 성능을 역으로 도출할 때는 비효율적이다. 본 논문은 국방 시스템의 요구 성능 분석을 위해 역 방향 시뮬레이션 소프트웨어 아키텍처를 제안한다. 제안하는 아키텍처는 기능적으로 구분된 하위 모듈들을 바탕으로 시스템 모델을 그대로 활용하되 역 모델 설계 유무에 따라 적합한 역 방향 시뮬레이션 방안을 선택할 수 있게 하였다. 사례 연구로 수상함의 대공/대잠전 시나리오에 제안한 소프트웨어 아키텍처를 적용하였는데, 국방 시스템의 요구 성능 분석을 하는데 있어 순 방향 시뮬레이션과 비교하여 동일한 수준의 요구 성능 분석을 보다 신속히 수행할 수 있음을 보였다. 마지막으로 본 논문의 연구 결과는 국방 시스템의 운용 전술 개발 뿐 아니라 다양한 시스템의 문제해결에 적절한 해결 방안을 제시할 것으로 기대한다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 추계 학술대회논문집
• /
• pp.261-267
• /
• 2005

The unsteady flow analysis of staging system is conducted. This study focuses on comparing the results of two different governing equations between Euler equations and Navier-Stokes equations. The Chimera grid scheme is applied to moving simulations for unsteady flow analysis with dynamic simulation. As a result, it is certified that inviscid simulation have capabilities enough to analyze the present staging problem.

• 반도체디스플레이기술학회지
• /
• 제6권2호
• /
• pp.49-52
• /
• 2007

Characteristics of an active pixel switch readout circuit were studied by SPICE simulation. A simple readout circuit consists of an operation amplifier, a diode, and a down-counter was suggested, and its successful operation was verified by showing that the differences in the detected signal intensity are accordingly converted to modulation of the voltage pulses generated by the comparator. A scheme to use these pulses to generate the original image was also put forward.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
• /
• pp.325-330
• /
• 2012

A single-phase PVPCS(photovoltaic power conditioning system) that contains a single phase dc-ac inverter tends to draw an ac ripple current at twice the out frequency. Such a ripple current may shorten passive elements life span and worsen output current THD. As a result, it may reduce the efficiency of the whole PVPCS system. In this paper, the ripple current propagation is analyzed, and two methods to reduce the ripple current are proposed. Firslyt, this paper presents notch filter with IP voltage controller to reject specific current ripple in single-phase PVPCS. The notch filter can be designed that suppress just only specific frequency component and no phase delay. The proposed notch filter can suppress output command signal in the ripple bandwidth for reducing output current THD. Secondly, for reducing specific current ripple, the other method is feed-forward compensation to incorporate a current control loop in the dc-dc converter. The proposed notch filter and feed-forward compensation method have been verified with computer simulation and simulation results obtained demonstrate the validity of the proposed control scheme.

• 한국시뮬레이션학회논문지
• /
• 제30권4호
• /
• pp.1-8
• /
• 2021

복잡하고 비선형적인 특징을 갖는 시계열 데이터를 예측하기 위해 딥러닝 기법이 널리 사용되고 있다. 본 연구에서는 최근에 개발된 WaveNet을 개선하고 워크포워드 검증 기법을 적용하여 전력 소비량 데이터를 24시간 이전에 예측하고자 한다. 원래 WaveNet은 오디오 데이터 예측에 사용하고자 고안되었으며, 장기간의 데이터를 효과적으로 예측하기 위해 1차원 팽창인과 합성곱(1D dilated causal convolution)을 사용한다. 먼저, WaveNet이 부호화된 정수 값이 아니라 실수 값을 출력하여 전력 데이터를 예측하기 적합하도록 개선하였다. 다음으로 학습 과정에 적용된 하이퍼파라미터(입력 기간, 배치 크기, WaveNet 블록 개수, 팽창 비율, 학습률 변경)를 조정하여 적절한 성능을 나타내도록 하였다. 마지막으로 성능 평가를 통해 전통적인 홀드아웃 검증 기법보다 본 연구에서 사용한 워크포워드 검증 기법이 전력 소비량 데이터 예측에 우수함 성능을 나타냄을 확인하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 제4회 압출 및 인발가공 심포지엄
• /
• pp.1-12
• /
• 2001

In cold forging of piston-pin for automobile parts, the flow defect appears by the dead metal zone. This appearance evidently happens in products with a thin piercing thickness for the dimension accuracy and the decrease of material loss. The best method that can prevent flow defect is removing dead metal zone. The purpose of this study is to investigate the material flow behavior of forward-backward extruded piston-pin through the relative velocity ratio and the stroke control of upper moving punch & container using the flow control forming technique. The finite element simulations are applied to analyse the flow defect, then the results are compared with the plasticine model material experiments. Finally, the model experiment results are in good agreement with the FE simulation ones.

• 한국자동차공학회논문집
• /
• 제9권1호
• /
• pp.156-162
• /
• 2001

An effective and practical method is presented for solving the forward kinematics of a 6-DOF Stewart Platform, using neural network algorithm together with Newton-Raphson method. An approximated solution is obtained from trained neural network, then it is used as an initial estimate for Newton-Raphson method. A series of accurate solutions are calculated with reasonable speed for the entire workspace of the platform. The solution procedure can be used for driving a real-time simulation platform.

• Communications for Statistical Applications and Methods
• /
• 제8권2호
• /
• pp.337-346
• /
• 2001

In this paper we consider the problem of identifying and testing the outliers in linear regression. first we consider the problem for testing the null hypothesis of no outliers. The test based on the ratio of two scale estimates is proposed. We show the asymptotic distribution of the test statistic by Monte Carlo simulation and investigate its properties. Next we consider the problem of identifying the outliers. A forward sequential procedure based on the suggested test is proposed and shown to perform fairly well. The forward sequential procedure is unaffected by masking and swamping effects because the test statistic is based on robust estimate.