• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.10A
• /
• pp.1461-1472
• /
• 2000

Recently, the mobile users seem to be rapidly increasing and then the capacity limit will be reached at close hand. In these situations, to provide them with good quality of service in the coming future, newly planned cell design is needed. In the next generation mobile communication systems, namely IMT-2000, good quality services will be possible only by designing the cell structure hierarchically with the help of appropriate cell planning. In the research process, the standardization reports on the future mobile cellular IMT-2000 system (3GPP) are investigated and the parameters, that are essential to cell planning, are also researched. Modeling of IMT-2000 radio link and the numerical analysis on that make it possible to calculate the forward/reverse link budget, system capacity call blocking probability Erlang capacity and cell coverage. In planning the cell of IMT-2000 system, various parameters are considered, such as hierarchical cell structure, number of users, data service forms and propagation area environments. From the results, efficient cell planning methods are proposed. Through this thesis efficient cell planning and maximum capacity will be achieved in the beginning of commercial IMT-2000 service.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.349-350
• /
• 2008

Average throughput estimation of EV-DO forward link is implemented on the basis of the serving coverage area per sector instead of time consuming and complicated Monte Carlo simulation. For the implementation of this analysis function in cell planning tool, $CellTREK^{(R)}$, developed by KT, both SNR vs. DRC mapping table and receiver sensitivity are suggested as the satisfying criteria to be satisfied above each threshold level simultaneously.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.10
• /
• pp.869-877
• /
• 2004

This paper deals with motion planning algorithm for kinematically redundant manipulators that are not fixed to the ground. Differently from usual redundant manipulators fixed to the ground, the stability issue should be taken into account to prevent the robot from falling down. The typical ZMP equation, which is employed in human walking, will be employed to evaluate the stability. This work proposes a feed forward ZMP planning algorithm. The algorithm embeds the 'ZMP equations' indirectly into the kinematics of the kinematic model of a manipulator via a ZMP stability index The kinematic self motion of the redundant manipulator drives the system in such a way to keep or plan the ZHP at the desired position of the footprint. A sequential redundancy resolution algorithm exploiting the remaining kinematic redundancy is also proposed to enhance the performances of joint limit index and manipulability. In addition, the case exerted by external forces is taken into account. Through simulation for a 5 DOF redundant robot model, feasibility of the proposed algorithms is verified. Lastly, usual applications of the proposed kinematic model are discussed.

• Transactions of Materials Processing
• /
• v.11 no.5
• /
• pp.405-413
• /
• 2002

A process planning system for cold forging of non-axisymmetric parts of comparatively simple shape was developed in this study. Programs for the system have been written with Visual LISP in AutoCAD. Shape of the product must be drawn with the solid line and the hidden line, and with the plane and front view, as well. At the plane, the system recognizes the external shape of non-axisymmetric portions - the number of the sides of the regular polygons and the radii of circles inscribing and circumscribing the polygon. At the front view, the system cognizes the diameter of axisymmetric portions and the height of the primitive geometries such as polygon, cylinder, cone, concave, convex, etc. The system perceives that the list developed from the solid line must be formed by the operation of forward extrusion or upsetting, and that the list developed from the hidden line must be formed by the operation of backward extrusion. The system designs the intermediate geometries again by considering clearance between workpiece and die, and then finally the billet diameter, in reverse order from the finished product, on the basis of volume constancy and using the operations, the forming sequence, the number of operations and the intermediate geometries which were already designed. The design rules and knowledges for the system were extracted from the plasticity theories, handbook, relevant reference and empirical knowledge of field experts. Suitability of the process planning was analyzed using SuperForge of FVM simulation package. The results of analysis showed good formability.

• Journal of Agricultural Extension & Community Development
• /
• v.18 no.3
• /
• pp.551-567
• /
• 2011

The Purpose of this study is to calculate the importance of the indicators for low carbon rural village planning. We made two kinds of indicators for inland area and waterside area to consider regional disparities. To develop indicators, a draft of the indicators was estimated with collected research materials and 42 experts reviewed this draft three times with modified delphi technique to check the validity and revise the draft. As a result, the inland indicators were settled with 4 domains 8 items 20 indicators and the waterside indicators were 4 domains 8 items 22 indicators. And next, calculating the importance of each indicators is progressed by AHP, analytic hierarchy process. So 42 experts chose the best important indicator related to air conditioning and heating or agricultural spin off in two kinds of indicators. The final indicators will be used to realize low carbon rural village planning in future which the government is pushing forward with construction of six-hundred low carbon green village.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.936-939
• /
• 2003

Potential and capabilities of GIS in planning and decision-making is widely known as an experimental tool, but its existence in real-world application is yet to realize. GIS originated in the field of cartography and even at today it is mainly used as a tool for map production. Number of reasons could bring forward for this shortcoming. Limited real-world applications could be a significant one among them. This paper describe an attempt to use GIS technology in Lao PDR where a study team was involved in formulating a Master Plan for national healthcare system. A database was created for the whole country with spatial and descriptive data gathered from various sources. Attempt was made to demonstrate the potential of GIS by using the database for identifying healthcare status, distribution of resources, recognizing deprived areas and locating areas for future investments based on accessibility and social status. The approach justified the investment on a GIS system and introducing the system in the planning sector from grass-root level to central level.

• Nuclear Engineering and Technology
• /
• v.53 no.4
• /
• pp.1369-1377
• /
• 2021

Nowadays, it is necessary to accelerate the construction of new power plant in face of rising energy demand in such a way that the electricity will be generated at the lowest cost while reducing emissions caused by that generation. The expansion planning is one of the most important issues in electricity management. Nuclear energy comes forward with the low-carbon technology and increasing competitiveness to expand the share of generated energy by introducing Gen IV reactors. In this paper, the generation expansion planning of these new Gen reactors is investigated using the WASP software. Iran power grid is selected as a case of study. We present a comparison of the twenty-one year perspective on the future with the development of (1) traditional thermal power plants and Gen II reactors, (2) Gen III + reactors with traditional thermal power plants, (3) Gen IV reactors and traditional thermal power plants, (4) Gen III + reactors and the new generation of the thermal power plant, (5) the new generation of thermal power plants and the Gen IV reactors. The results show that the Gen IV reactors have the most developing among other types of power plants leading to reduce the operating costs and emissions. The obtained results show that the use of new Gen of combined cycle power plant and Gen IV reactors make the emissions and cost to be reduced to 16% and 72% of Gen II NPPs and traditional thermal power plants, respectively.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.30 no.3
• /
• pp.76-85
• /
• 2022

Work situational awareness test (WSAT) has been utilized to estimate the fatigue risk of workers who worked with time pressure or latent accident risks at their work environment. Thus researchers decided to use WSAT to estimate fatigue risk of cabin crews of an airline in Korea and to analyze empirically how such risk might have an effect on cabin crew's safety behavior. This was because there had not been enough research on accessing cabin crews' fatigue and analyzing its risk for the flight safety. In addition, the mediation effect of cabin crew's planning was also analyzed through Sobel-test by researchers among external factors such as lack of concentration, attention deficit, distraction and safety behavior. According to empirical analysis, it was found attention deficit and distraction of cabin crews due to fatigue during the flight had a significant negative effect on their planning. Planning was also proven to have mediation effect to cabin crew's safety behavior.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.12 no.2
• /
• pp.5-20
• /
• 1987

This paper addresses sensitivity analysis for a deterministic multi-period production and inventory model. The model assumes a piecewise linear cost structure, but permits backlogging of unsatisfied demand. Our approach to sensitivity analysis here can be divided into two basic steps; (1) to find the optimal production policy through a forward dynamic programming algorithm similar to the backward version of Zangwill [1966] and (2) to apply the penalty network approach by the author [1986] in order to derive sensitivity ranges for various model parameters. Computational aspects are discussed and topics of further research are suggested.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.290-295
• /
• 1989

This paper proposes a Expert CAPP System for integrating CAD/CAM of rotational work-part by rule based approach. The CAD/CAPP integration is performed by the recognition of machined features from the 2-D CAD data (IGES) file. Selecting functions of the process planning are performed in modularized rule base by forward chaining inference, and operation sequences are determined by means of heuristic search algorithm. For CAPP/CAM integration, post-processor generates NC code from route sheet file. This system coded in OPS5 and C language on PC/AT, and EMCO CNC lathe interfaced with PC through DNC and RS-232C.