• 대한물리의학회지
• /
• 제16권1호
• /
• pp.73-81
• /
• 2021

PURPOSE: This study examined effects of the untact trunk stabilization exercise program on muscle thickness, trunk strength, maximal expiratory flow, and static balance. METHODS: The subjects were 20 normal adults divided into 10 in the contact exercise group and 10 in the untact exercise group. The trunk stabilization exercise program was conducted for four weeks. The muscle thickness was measured using ultrasound. The maximal expiratory flow was measured using Personal Best Full Range Peak Flow Meter. The static balance was measured through Bio-rescue; and the trunk muscle strength was measured by bending the upper body forward and measuring the time for maintaining the posture. RESULTS: Both contact and untact exercise groups showed significant differences in muscle thickness, muscle strength, maximal expiratory flow, and static balance (p < .05). A significant difference in muscle thickness on ultrasound was observed between the contact and untact exercise groups (p < .05). CONCLUSION: Activation of the transverse abdominal muscle requires accurate instructions of the contact exercise, but despite environmental constraints, the untact exercise program is as effective as the contact exercise for improving muscle strength, maximum expiratory flow, and static balance.

• Steel and Composite Structures
• /
• 제38권6호
• /
• pp.705-716
• /
• 2021

An innovative partially precast partially encased composite beam (PPECB) is put forward based on the existing research. In order to study the flexural performance of the new composite beam which has precast part and cast-in-place part, six prefabricated specimens and one cast-in-place specimen are designed with considering the influence of the production method, the steel flange thickness, the concrete strength grade and the stirrup process on the behavior of the composite beam. Through four points loading and test data collection and analysis, the behavior of partially prefabricated specimen is similar to that of cast-in-place specimen, and the casting method, the thickness of the steel flange, the concrete strength grade and the stirrup process have different influence on the crack, yield and peak load bearing capacity of the component. Finally, the calculation theory of plastic bending of partially precast partially encased concrete composite beams is given. The calculation results are in good agreement with the experimental results, which can be used for practical engineering theory guidance. This paper can provide reference value for further research and engineering application.

• Physical Therapy Rehabilitation Science
• /
• 제11권2호
• /
• pp.259-268
• /
• 2022

Objective: The purpose of this study was to measure the immediate effect of hip hinge exercise stretching on hamstring flexibility, pelvic tilting angle, proprioception, and dynamic balance in individual with tightness of the hamstring. Design: A randomized controlled trial. Methods: A total of 35 healthy young adults (27 males, 8 females) volunteered for this study and randomly divided into three groups (Hip hinge exercise stretching group, passive stretching group, and PNF stretching group). The hamstring flexibility, pelvic tilting angle, knee joint proprioception, dynamic balance was conducted for 3 times. In order to evaluate the hamstring flexibility, the active knee extension test was performed. Forward bending test was performed to examine pelvic tilting angle.The proprioception was tested by the joint position sense test and dynamic balance was evaluated by Y balance test. Results: The hamstring flexibility, pelvic tilting angle and dynamic balance were significantly improved between three groups before and after intervention (p<0.05). Dynamic balance was significantly difference between the three groups in the posterolateral direction (p<0.05). Conclusions: This study result showed that hip hinge exercise stretching was the most effective method for increasing hamstring flexibility, pelvic tilting angle and dynamic balance. In addition, it is necessary to study whether hamstring stretching is effective in low back pain patient with hamstrings tightness.

• Physical Therapy Rehabilitation Science
• /
• 제12권1호
• /
• pp.19-25
• /
• 2023

Objective: Patients with scoliosis complain of various symptoms such as muscle imbalance, dysfunction, back pain, abnormal posture and gait abnormality. The most basic treatment for scoliosis is to observe the progress based on conservative treatment. Therefore, in this case report, the effect of cytoskeletal manual therapy (CMT), a soft tissue mobilization technique, on pain intensity, muscle thickness, and pressure pain threshold (PPT) in a patient with scoliosis was investigated. Design: A case report Methods: A 25-year-old male diagnosed with scoliosis visited the Neuromusculoskeletal Science Laboratory with chronic back pain. In the laboratory, scoliosis was confirmed through the X-ray image used for his diagnosis, and it was confirmed again through Adam's forward bending test. Pain, pressure pain threshold and muscle thickness were measured to compare the immediate effects of CMT applied in the laboratory for 40 minutes. Treatments were visited two weeks after the first visit and outcome measures were assessed after a total of two visits. Results: After receiving CMT up to the second session, the pain intensity decreased by 4 points and the screening angle decreased by 15 degrees. Muscle thickness decreased in all but 10 mm on the dominant side of the thoracic spine. All of the PPTs increased, and the greatest increase was 3.1 lb on the dominant side of the thoracic spine. Conclusions: CMT showed positive improvement in pain during trunk flexion, spinal curvature, muscle imbalance, and pressure pain, which is considered as an ancillary treatment option for scoliosis management.

• 대한치과교정학회지
• /
• 제28권6호
• /
• pp.905-914
• /
• 1998

본 연구의 목적은 1) 편측성 순구개열 신생아 환자에 대한 술전 비치조 정형장치(PNAM) 치료를 소개하고, 2) 이 장치의 치조골 정형 효과를 평가하는 것이다. 서울대학교병원 교정과에 내원하여 PNAM장치를 사용하여 치료받은 4명의 편측성 순구개열 환자(남자 3명, 여자 1명, 평균 초진연령 : 23.2일)을 대상으로 하였으며, 치조골에서 대분절과 소분절 파열부간의 평균거리는 8.27mm였고 치조골 정형치료의 평균 기간은 9.7주였다. 초진시 (Ti)와 성공적인 치조골 정형술이 이루어진 시기(T2)에 이들 환자의 인상을 채득하여 모형을 제작한 후, 사진촬영과 digital caliper를 사용하여 7개의 길이항목과 5개의 각도항목을 계측하였다. SPSS win. ver 7.5 프로그램을 사용하여 통계처리하였고, 평균치의 차이를 비교하기 위하여 paired t-test를 사용하였다. 1. 신생아의 치조골 후방부는 치조골 정형술을 시행하는 동안 안정된 구조물이었다. 2. 치조골 정형술에 의하여 대분절의 전방 성장이 억제되었다. 3. 피조골 정형술에 의한 파열부의 폐쇄는 주로 대분절 전방부의 내측과 후방 굴곡 및 소분절 전체의 외측 굴곡에 의한 것이었다.

• The Journal of Korean Physical Therapy
• /
• 제13권2호
• /
• pp.265-272
• /
• 2001

The object of this thesis is to study the correlation between scoliosis and foot in a theoretical and empirical method. My research process was investigated for 34 students on the forward bending test, foot printer test, feedoscope test, X-ray test and so on. The main results of this study were as follows: 1. There was statistical significance on the correlation between foot length and spine length. 2. Scoliosis angle is the smallest on the pes plannus group and the biggest on the pes cavus group without statistical significance. 3. Left lumbar curve is the smallest, and right thoracic spine curve is the biggest on the left foot pattern group with statistical significance. 4. On the foot weightbearing groups, there was statistical significance both of between left and right foot groups. 5. There was no statistical significance on the t-test analysis between left foot area and right foot area according to scoliosis typology.

• 한국운동역학회지
• /
• 제20권1호
• /
• pp.83-90
• /
• 2010

The purpose of this study is to validate that change of impact by the Early Extension in during a golf driver swing. 13 golf players who were diagnosed with symptoms of Early Extension participated in a proactive corrective training programs that took place 3 times a week for a 4 month period. Data was collected by recording 5 pre and 5 post training driver swings and analyzing the data to calculate the change in velocity and its effect in the shot used the TRACK MAN. After the training, the changes of early extension were -0.21 cm in backswing section E2(take away), -0.64 cm in E3(halfway backswing), and -0.94 cm in E4(backswing top). The downswing section changes were -1.34 cm in event E5(halfway downswing), -1.74 cm in E6(impact). Impact force increased and thus club speed increased by 6.32 km/h, ball speed increased by 10.94 km/h, max height decreased by -6.22 m, carry increased by 10.85 m, carry side(left deviation) decreased by 4.84 m, flight time by increased by 0.4 sec, and total length increased by 17.96 m while landing angle decreased by -7.74 deg.

• 한국의류산업학회지
• /
• 제14권3호
• /
• pp.454-464
• /
• 2012

In this study, fitness tests for slacks were divided into shape fitness test and motion fitness test, and the fitness test conditions for slacks were designed as the first step for standardization of measuring scales. Shape fitness test consisted of analyzing the parameters of appearance sensory tests as described in preceding studies, performing a simulated appearance sensory test, collecting and considering apparel experts' opinions about the test parameters, and establishing test conditions in terms of test regions, descriptions and faces. For the regions of the abdomen, hip, crotch, thighs, and knees, the parameter of unnecessary wrinkle/stretch was observed from the anterior and posterior body, and then evaluated; for waist, hip, crotch, knee and hem circumference, the parameters of ease and horizontality were observed from the anterior body and posterior body followed by evaluation; and, at the levels of waist, hip, crotch, knee and hem circumference, the division of the lateral line were observed from the lateral body followed by evaluation. Motion fitness test was composed of reviewing and analyzing comparatively the methods of motion fitness tests as mentioned in preceding studies, and establishing test conditions in terms of test motions and test regions. For each of the waist, abdomen, hip, crotch, and knees, wear sensation was tested in the positions as follows: upright standing, moderate walking, chairsitting, bending forward to the maximum, and kneeling down, provided that as the measured points of garment pressure, anterior waist, abdominal protrusion, buttock protrusion, crotch, and midpatella were set and tested.

• 한국의류산업학회지
• /
• 제9권2호
• /
• pp.237-242
• /
• 2007

The purpose of this study is to examine the functionality with improved pattern-design working uniform(protocol, P) and current working uniform(control, C). Movement functionality evaluation of improved pattern-design working uniform was carried out through sensory evaluation of working uniform. Movements for the sensory evaluation consisted of four types of up and down and horizontal movements of the shoulders, four types of waist movements and five types of knee movements. The results have been shown as follows: The sensory value of back girth, wrist, side seam area of the "P" with the posture of raising an arm forward up to $90^{\circ}$ and the maximal arm's vertical movement significantly improved compared to the "C". Therefore, it can be concluded that movement functionality was increased with the improved pattern-design working uniform in the respect of arm's up and down movement. Furthermore, for P, Movement functionality improvements were shown in P with arm's horizontal movement, waist bending movement, and knee movement. Current working uniform(C) is jumper-type which wa designed without consideration for movement functionality of the arms and legs. But Pattern-design uniform(P) which was developed in this study. Therefore, the more patterns development, the better movement functionality in working uniform. The improved movement functionality improvements in working uniform will provide not only personal pleasantness but also efficiency of productivity at construction sites. In respect of human body's movement, further study for improved working uniform is required.

• 한국의류산업학회지
• /
• 제13권4호
• /
• pp.582-589
• /
• 2011

The purpose of this study was to investigate problems of design, fitness, suitability for movement, and comfort in current Korean military tank driver's clothing through analysis of actual wearing condition by questionnaire and field evaluation and. to provide basic data for developing a improved design of Korean military tank driver's clothing. The survey was done for 477 military tank driver and the field evaluation was also done for evaluation. The overall satisfaction for design of military tank driver's clothing(3.25) was higher than that for the easiness in wearing and taking off(2.76). The military tank drivers evaluated that current coverall type of clothing is more suitable than two-piece type of clothing. The overall satisfaction for fitness of clothing was as a whole low(2.82~3.09), Especially, the satisfaction for fitness of from front and back rise length was the lowest one. In the satisfaction for clothing materials, the satisfaction for the breathability of material was the lowest, followed by clothing insulation and air permeability. The satisfaction for movement was low in bending waist and raising forward and aside. The part which surveyors think most dissatisfactory was also front and back rise length. The frequency in use of pocket was the highest in chest pocket, followed by waist and pants pockets. The satisfaction for opening easiness of hips opening part was very low(2.64).