• THE JOURNAL OF KOREAN ORIENTAL ONCOLOGY
• /
• v.2 no.1
• /
• pp.75-90
• /
• 1996

This experiment was designed to study the antitumor effects and Activity of Natural Killer Cell of semen Tiglii plus Rhizoma Rhei. The cytotoxic and antitumor effects were evaluated on human cell lines(A549, Caki-1, LL2, Sarcoma 180, NIH/3T3) after exposure to prebrewed Semen Tiglii plus Rhizoma Rhei water extract 0.1, 0.2, 0.4, 0.8, 1.6mg/ml using in MTT assay, LDH, colony forming efficency and SRB assay which were regarded as a valuable method for cytotoxic and antitumor effects of unknown compound on tumor cell lines. The results obtained in this studies were as follows. 1. From the result of MTT assay, the cytotoxicity of ST(生巴豆霜), ST+RR(生巴豆霜加大黃) were concentration-dependently increased in both group of the ST and ST+RR, the cytotoxicity of ST+RR(生巴豆霜加大黃) was similar to that of ST(生巴豆霜). 2. From the result of LDH, the cytotoxicity of ST, ST +RR were concentrati -on-dependently increased in both group of the ST and ST+RR, the cytotoxicity of ST+RR was similar to that of ST. 3. The antitumor effect on A549 tumor cell from the result of colony forming efficiency showed the inhibitory effect on the growth in both group of the ST and ST+RR, the inhibitory effect on growth was low slightly in the ST+RR. 4. From the result of SRB assay, the antitumor effect on caki-1 tumor cell of ST, ST+RR showed the inhibitory effect on the growth in both group of the ST and ST+RR, the antitumor effect of ST+RR was similar to that of ST. 5. Median survival time and increased life span were increased slightly in both group of the ST and ST+RR. 6. The inhibitory effect on the growth of Sarcoma 180 and Lewis lung carcinoma tumor cell were increased slightly in both group of the ST and ST+RR. 7. The activity of NK cell was increased in the ST+RR.

• Journal of Soil and Groundwater Environment
• /
• v.20 no.4
• /
• pp.31-40
• /
• 2015

Various types of inorganic and organic colloids are present in natural water including groundwater. Previous studies showed that Fe, Mn and Al are colloid-forming elements and dissolved concentrations can be erroneous for these elements if water samples are not properly filtered. Dissolved concentrations of elements including Ca, Na, Mg, K, Fe, Mn, Si and Al in groundwater from alluvial and bedrock aquifers, and surface water near Nakdong River were determined to evaluate effects of colloids on dissolved concentrations in natural water samples using various pore sizes of filters. Groundwater is mostly anoxic and have elevated concentrations of Fe and Mn, which provides a unique opportunity to observe the effects of colloids on dissolved concentrations of colloid-forming elements. Membrane filters with four kinds of pore sizes of 1000 nm, 450 nm, 100 nm, and 15 nm were used for filtration of water samples. Concentrations of dissolved concentrations in each filtrate did not show significant differences from 1000 nm to 100 nm. However, concentrations of all elements considered were decreased in the filtrates obtained using 15 nm pore size filters by 10 to 15% compared to those using 450 nm except for bedrock groundwater. Al in surface water showed a distinct linear decrease with the decrease of filter pore sizes. These results showed that 100 nm pore size had little effect to remove colloidal particles in alluvial groundwater and surface water in our study. In contrast, significant concentration decreases in 15 nm pore size filtrates indicate that the presence of 15 to 100 nm colloidal particles may affect determination of dissolved concentrations of elements in natural water.

• Tribology and Lubricants
• /
• v.18 no.4
• /
• pp.260-266
• /
• 2002

In this study, the effects of oxide layer farmed on the wear tracks of TiN coated silicon wafer on friction and wear characteristics were investigated. Silicon wafer was used for the substrate of coated disk specimens, which were prepared by depositing TiN coating with 1 ${\mu}{\textrm}{m}$ in coating thickness. AISI 52100 steel ball was used fur the counterpart. The tests were performed both in air for forming oxide layer on the wear track and in nitrogen to avoid oxidation. This paper reports characterization of the oxide layer effects on friction and wear characteristics using X-ray diffraction(XRD), Auger electron spectroscopy(AES), scanning electron microscopy (SEM) and multi-mode atomic force microscope(AFM).

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.167-168
• /
• 2002

In this study, the effects of oxide layer formed on the wear tracks of TiN coated silicon wafer on friction characteristics were investigated. Silicon wafer was used for the substrate of coated disk specimens, which were prepared by depositing TiN coating with $1\;{\mu}m$ in coating thickness. AISI 52100 steel balls were used for the counterpart. The tests were performed both in air for forming oxide layer on the wear track and in nitrogen to avoid oxidation. This paper reports characterization of the oxide layer effects on friction characteristics using X-ray diffraction (XRD). scanning electron microscopy (SEM) and friction force microscope (FFM).

• The Korean Journal of Pharmacology
• /
• v.32 no.2
• /
• pp.169-175
• /
• 1996

The reactivity of the sulfhydryl (thiol) group of homocysteine has been associated with an Increased risk of atherosclerosis, thrombosis and stroke. Thiols also react with nitric oxide (NO, an endothelium-derived relaxing factor (EDRF) ), forming S-nitrosothiols that have been reported to have potent vasodilatory and antiplatelet effects and been expected to decrease adverse vascular effects of homocysteine. The present study was aimed to Investigate whether the S-nitrosation of homocysteine modulates the neurotoxic effects of homocysteine. An 18 hour-exposure of cultured rat cortical neurons to homocysteine ( >1 mM) resulted in a significant neuronal cell death. At comparable concentrations ( <10 mM), however, S-nitrosohomocysteine did not induce neuronal cell death. Furthermore, S-nitrosohomocysteirle partially blocked NMDA-mediated neurotoxicity. S-nitrosohomocysteine also decreased NMDA-mediated increases in intracellular calcium concentration. The present data indicate that in brain nitric oxide produced from neuronal and nonneuronal cells can modulate the potential, adverse properties of homocysteine.

• Journal of the Korean Wood Science and Technology
• /
• v.13 no.3
• /
• pp.3-26
• /
• 1985

The object of this study was to investigate the effects on physical and mechanical properties of wood particle and sawdust board combined with wire net. Conventional forming, press-lam, and veneer comply boards combining one to four wire net sheets were made from wood particle and sawdust with different spacings (8, 10, 12, and 18 Mok) and different wire diameters (0.35, 0.50, and 0.80mm) composing wire net. They were compared and analyzed statistically with specific gravity, thickness swelling, length swelling, bending properties (modulus of rupture, modulus of elasticity, work to proportional limit, and total work), internal bonding strength, and screw holding strength between wood particle and sawdust boards. The results obtained at this study as cording to the discussions might be concluded as follows; 1. In specific gravity, both particle and sawdust boards by press-lam method were higher than by conventional forming and veneer comply method, and the boards containing more wire net sheets also showed higher value. But the wire net spacings(Mok) had no influence on specific gravity. In general, particle board showed higher specific gravity than sawdust board. Veneer comply board showed lowest specific gravity values. 2. Both particle and sawdust boards by press-lam method was slightly lower than by conventional forming and veneer comply method in thickness swelling. The sawdust board containing 8, 12. and 18 Mok wire net showed lower thickness swelling than the corresponding particle board, but both sawdust and particle boards containing the T8 and 10 Mok wire net showed higher and similar thickness swelling. 3. Both particle and sawdust boards containing wire net showed no difference in MOR and MOE of bending. Comply board was the highest and particle board showed slightly higher than sawdust board in MOR and MOE values. 4. In work to proportional limit and total work in bending, both particle and sawdust boards containing thicker wire diameter and more wire net sheets showed higher value. From these facts, it is conceivable that boards with thicker wire diameter and more wire net sheets show increasing resistance against external force. But there was no significant difference between particle and sawdust borads. 5. In resistance against delamination (internal bonding strength), both sawdust and particle boards containing wire net showed lower value than control, and also showed decreasing tendency with more number of wire net sheet composed. Particle board showed higher resistance against delamination than sawdust board. 6. In screw holding strength, sawdust board containing thicker wire diameter and more wire net sheets showed higher value, but particle board by press-lam method was higher than by conventional forming and veneer comply method. Screw holding strength of particle board was higher than that of sawdust board.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.7
• /
• pp.777-782
• /
• 2011

Micro features on the surface are well-known to have significant effects on optical or mechanical properties such as the optical interference, reflectance at the surface, contact angle, interfacial friction, etc. These surface micro features are increasingly employed to enhance the functionality of the applications in various application areas such as optical components for LCD or solar panel. Diverse surface features have been proposed and some of them are showing excellent efficiency or functionality, especially in optical applications. Most applications employing the micro features need manufacturing process for mass production and the injection molding and roll-to-roll forming, which are typical processes for mass production adopting polymeric materials, may be also preferred for micro patterned plastic product. Since the functionality or efficiency of the surface structures generally depends on the shape and the size of the structure itself or the array of the structures on the surface, it would be very important to replicate the features very precisely as being designed during the molding the micro pattern applications. In this paper, a series of research activities is introduced for roll-to-roll forming of micro patterned film including filling of patterns with UV curable resin, demolding of surface structures from the roll tool, control of surface energy and cure shrinkage of resin and dispose time and intensity of the UV light for curing of UV curable resin.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.418-425
• /
• 2018

The purpose of this study was to investigate the effects of young children's empathic ability and interpersonal competence on caring behavior in forming relationships. Subjects included 152 4- and 5-year-old children attending a kindergarten located in a micropolitan city. Questionnaires required self-reporting by teachers, and were used to investigate young children's caring behavior, empathic ability and interpersonal competence in forming relationships. Data was analyzed using t-test, Pearson's correlation coefficient analysis and Stepwise-Regression analysis. Results were as follows: First, young children's caring behavior was negatively correlated with empathic ability and positively associated with interpersonal competence in forming relationships. Second, young children's emotional behavior as each domain of caring behavior were predictable variables for explaining the relative effect of the social reactivity and explaining the relative effect of relationship formation. Active behaviors were predictable variables for explaining the relative effect of follow-up instructions, but negatively affected mental burden. Normative behaviors were predictable variables for explaining the relative effect of social reactivity, but negatively predictable variables for explaining the relative effect of the relationship formation and mental burden. Value-contributing behavior in each domain of caring behavior were predictable variables for explaining the relative effect of the positive interaction.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.12 no.2
• /
• pp.20-52
• /
• 1999

In order to investigate the effect of Naetakchungumsankamibang(NTCGS) water extract on the skin tumor induced by 3-MCA and immunological responses in mice, the cytotoxicity against SK-MEL-2 cells and total number of tumors induced by 3-MCA were measured. The numbers of WBC, platelets and RBC, plaque forming cells, hemagglutinin titer, hemolysis titer, carbon clearance, proliferation of splenocyte by thymidine uptake assay, splenic leukocyte by FACS analysis and $TNF-{\alpha}$ were also measured for the evaluation of the immunological responses. The results were obtained as follows: 1. In cytotoxicity against SK-MEL-2 cells, concentration inhibiting cell growth up to below $20\%$ of control was recognized at 1mg/ml of NTCGS. 2. In Inhibitory effect on the skin tumor induced by 3-MCA, the results showed a strong inhibitory effect of NTCGS. 3. In hematological changes in the tumor bearing mice, the numbers of WBC decreased significantly in NTCGS treated group as compared with control. 4. In hematological changes in the tumor bearing mice, the numbers of platelets increased significantly in NTCGS treated group as compared with control. 5. In hematological changes in the tumor bearing mice, the numbers of RBC increased with no significance in NTCGS treated group as compared with control. 6. Effects of the plaque forming cells in the tumor bearing mice, NTCGS treated group exhibited a significant effect compared with control. 7. In terms of the effects on hemagglutinin titer, NTCGS treated group showed higher level than control, without significance. 8. In terms of the effects on hemolysis titer, NTCGS treated group showed higher level than control, without significance. 9. In terms of the effects on phagocytic index K in Balb/C mice, NTCGS treated group showed significant difference from control. 10. In terms of the effects on proliferation of splenocyte by thymidine uptake assay, NTCGS showed significant effect at the concentration of 0.5mg/ml. 11. In terms of the effects on splenic leukocyte of Balb/C mice by FACS analysis, NTCGS treated group showed significantly higher level of helper T cell, B cell and macrophage than in control. 12. In terms of the effects on the secretion of $TNF-{\alpha}$, the treated group showed significant effect at the concentration of 1mg/ml of NTCGS. Based on the results summarized above, NTCGS is considered to have antitumor activity and immunological responses against skin tumor, and to be usable fur the treatment.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.3
• /
• pp.429-432
• /
• 2008

Much studies have been concentrated to develop the fabrication technique for high critical current density but still there are a lot of gap which should be overcome for large scale application of superconducting materials at liquid nitrogen temperature. The improvement of the critical current can be achieved by forming the nano size defect working as a flux pinning center inside the superconductor. In this paper, the establishment of fabrication condition and additive effects of second elements were examined so as to improve the related properties to the practical use of superconductor.