• Korean Journal of Computational Design and Engineering
• /
• v.13 no.6
• /
• pp.440-449
• /
• 2008

This paper deals with a method calculating various hull form parameters which are required in numerical analysis for ship performance such as motion, maneuverability, resistance and propulsion, etc. After the hull form is designed, before the model tests the ship's performances are evaluated by various analysis tools in which the hull form parameters are used with many kinds of forms aside from offset data. Here, The hull form parameters characterize the properties of hull form and contain positional, differential and integral information implicitly. Generally, the commercial CAD-system has not functions enough for supporting these form parameters and therefore each shipyard uses its own in-house analysis program as well as commercial analysis software. To overcome these limitations, modules for supporting these analysis programs have developed. The modules contain cubic composite spline cure using local curve fairing, intersect algorithm, Gaussian integral, and other geometric techniques needed in calculating hull form parameters. Using our analysis-supporting modules, a complex hull form can be remodeled exactly to the hull form designed by CAD-system and any hull form parameter required in various performance analyses can be calculated.

• KIEAE Journal
• /
• v.8 no.1
• /
• pp.99-104
• /
• 2008

This study surveys the types of form works used for constructing composite basement walls found in domestic construction sites. Based on expert surveys, the research provides criteria for selecting a form work type and cost-benefit analysis for different types of form works. In selecting a form work type, safety was considered the most important factor. It is induced from the survey that a successful construction requires a form work type that could solidly bear the lateral pressure of concrete rather than other types that cut back the cost and shorten the construction period. In the cost-benefit analysis, the benefit was the highest in 'euro-form+soldier system', and the cost was most competent in 'rib-lath+soldier system'. In considering benefit and cost together, 'euro-form+soldier system' was judged to be the best option. This is likely to be attributed to the following reasons: site workers are familiar with euro-forms because it is the most widely used; and, soldier system is more reliable in bearing lateral pressure compared to steel pipes.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.70-71
• /
• 2014

The structural work is the main process of building construction which influence on the time, cost, safety and quality. The form work is one of the main process which has from 20 to 30 percentage of structural work. Especially the form work for beams is complex and need more manpower compared with form work for column or slab. When the existing forms such as plywood form, steel framed wooden form and aluminum form, is used for form work of beam, it would result in the cost overrun caused by needs of lots of manpower and resources. Therefore, the aim of this study is analysis of the requirement for development of SMART beam form. The result of this study shall be used for the development of SMART form work system.

• Archives of Pharmacal Research
• /
• v.27 no.3
• /
• pp.357-360
• /
• 2004

Four crystal forms of ketorolac have been obtained by recrystallization in organic solvents under variable conditions. Different ketorolac polymorphs and pseudo polymorph were characterized by X-ray powder diffraction crystallography (XRD), Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). In the dissolution studies in water at $37{\pm}0.5^{\circ}C$ four crystal forms showed different patterns. The solubility of Form I were the highest. The solubility decreased in rank order: Form I> Form II > Form III > Form IV. Form land Form III were shown to have a good physical stability at room temperature for 60 days. However, Form II is converted to Form III and Form IV is converted to Form I after 60 days storage. Therefore, these observations indicate that crystalline polymorphism for ketorolac is readily inter-convertible and the relationship may have to taken into consideration in the formulation of the drug.

• Advances in Computational Design
• /
• v.2 no.1
• /
• pp.71-87
• /
• 2017

This study focuses on the efficiency and applicability of dynamic relaxation methods in form-finding of membrane structures. Membrane structures have large deformations that require complex nonlinear analysis. The first step of analysis of these structures is the form-finding process including a geometrically nonlinear analysis. Several numerical methods for form-finding have been introduced such as the dynamic relaxation, force density method, particle spring systems and the updated reference strategy. In the present study, dynamic relaxation method (DRM) is investigated. The dynamic relaxation method is an iterative process that is used for the static equilibrium analysis of geometrically nonlinear problems. Five different examples are used in this paper. To achieve the grading of the different dynamic relaxation methods in form-finding of membrane structures, a performance index is introduced. The results indicate that viscous damping methods show better performance than kinetic damping in finding the shapes of membrane structures.

• Transactions of Materials Processing
• /
• v.18 no.1
• /
• pp.39-44
• /
• 2009

This paper is concerned with forming technology of an automotive front side member part with ultra high strength steel sheet of DP980. The forming technology considered in this paper is the draw & form type, which installs the upper pad and lower pad to produce the complicated shape of ultra high strength steel sheet. In order to produce sound product, comparison between form type and draw & form type and between draw type and draw & form type are investigated by FE-analysis. FE-analysis is carried out with commercial sheet metal forming analysis S/W, DYNAFORM. It was shown from FE-analysis that the draw & form type satisfied the required specifications such as the dimensional accuracy and soundness of automotive front side member part. The effectiveness of the analytical result was verified by the experiment. From this investigation, the draw & form type is proved to be able to supply useful forming technology in forming ultra high strength steel.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.11a
• /
• pp.9-13
• /
• 2009

Recently, construction in downtown is often done closely at the adjacent building. In this case, underground construction need to Basement Composite Wall(BCW) construction. However, generally, during the construction process of BCW form works have many problems that are narrow working space and inefficient time consuming. Despite of these problems, there was no quantitative research for the work time of BCM assembly. Therefore, in this study, work time of CBW form assembly in underground construction is identified by the work analysis. The results of this study reveal that buttress work of basement form take lots of time in the entire work process of Basement Composite Wall form assembly.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.13 no.4
• /
• pp.93-110
• /
• 2011

This study investigates the analysis on the acceptance of Foreign Fashion trends in Korean Fashion Collection by collections, years, season, and designers. The purpose of this study is Korean collection's degree to adopt and receive foreign collections, by comparative analysis of design features between Seoul and foreign collections. For such purpose, from 2006 S/S to 2011 F/W, 5185 pictures were collected from designer's photos of Seoul, Paris, Milan, NY, and London collections. The content analysis and statistical analysis using SPSS will be conducted for data analysis. The results of the research are as follows. First, regarding the design features, square-form silhouette, achromatic colors, and none pattern were presented as well. Second, there were significant differences in the design characteristics of each year. Particularly, in 2008, X-form silhouette, Yellow and Green color, and flower pattern were emphasized. Third, the design features by season were significant differences. In S/S season, square-form and X-form silhouette, achromatic colors of white and gray color, none pattern were evident while in F/W season, square-form Silhouette, achromatic colors of black and gray, and none pattern were emphasized. Fourth, the design features by designer are as follows. In terms of form, Seoul collection was influenced by Paris collection. In terms of colors, it was influenced by NY and London collections.

• The KIPS Transactions:PartD
• /
• v.15D no.2
• /
• pp.197-206
• /
• 2008

The CTOC framework was implemented to efficiently perform analysis and optimization of the Java bytecode that is often being used lately. In order to analyze and optimize the bytecode from the CTOC, the eCFG was first generated. Due to the bytecode characteristics of difficult analysis, the existing bytecode was expanded to be suitable for control flow analysis, and the control flow graph was drawn. We called eCFG(extended Control Flow Graph). Furthermore, the eCFG was converted into the SSA Form for a static analysis. Many loops were found in the conversion program. The previous CTOC performed conversion directly into the SSA Form without processing the loops. However, processing the loops prior to the SSA Form conversion allows more efficient generation of the SSA Form. This paper examines the process of finding the loops prior to converting the eCFG into the SSA Form in order to efficiently process the loops, and exhibits the procedures for generating the loop tree.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.5
• /
• pp.27-35
• /
• 2008

The CTOC framework was implemented to efficiently perform analysis and optimization of the Java bytecode that is often being used lately. In order to analyze and optimize the bytecode from the CTOC, the eCFG was first generated. Due to the bytecode characteristics of difficult analysis, the existing bytecode was expanded to be suitable for control flow analysis. and the control flow graph was drawn. We called eCFG(extended Control Flow Graph). Furthermore, the eCFG was converted into the SSA Form for a static analysis. Many loops were found in the conversion program. The previous CTOC performed conversion directly into the SSA Form without processing the loops. However, processing the loops prior to the SSA Form conversion allows more efficient generation of the SSA Form. This paper examines the process of finding the loops prior to converting the eCFG into the SSA Form In order to efficiently process the loops, and exhibits the procedures for generating the loop tree.