• 제목/요약/키워드: Forestry Engineering

검색결과 392건 처리시간 0.027초

양이온성 지방산아민 벌키화제를 이용한 저밀도 종이 제조 (1) - 처리제 농도 및 펄프 수종이 미치는 영향 - (Manufacture of Low Density Paper by Cationic Fatty Acid Bulky Promotor Treatment (1) - Effect of Its Concentration and Pulp Type -)

  • 남윤석;최경화;김해란;조준형
    • 펄프종이기술
    • /
    • 제46권4호
    • /
    • pp.21-27
    • /
    • 2014
  • As a part of the study on manufacture of low density paper by organic bulky agent treatment, the effects of cationic fatty acid bulky agent on physical and optical properties of handsheets were elucidated. The research on change of physical and optical properties of paper samples according to bulky agent concentration, pulp type, and pulp combination were carried out. The results demonstrated that an increase of the concentration of cationic fatty acid bulky agent was proportional to an increase of the bulky properties of paper samples while tensile strength decreased. Also, the more the treated concentration of cationic fatty acid bulky agent increased, the more the ISO brightness of paper samples decreased while the opacity increased. The effectiveness of bulky agent with softwood bleached kraft pulp (SwBKP) was higher than that with hardwood bleached kraft pulp (HwBKP). In addition, the effectiveness with mixed pulps was higher than that with single pulp.

토목섬유를 이용한 임도 노면의 안정성 예비 분석 (Preliminary Analysis of Stabilization of Forest Road Surface Using Geosynthetics)

  • 이관희;오세욱;고치웅;김동근
    • 한국환경복원기술학회지
    • /
    • 제18권6호
    • /
    • pp.51-60
    • /
    • 2015
  • This study conducted shear strength test and plate bearing test to look into the characteristics of bearing capacity using geosynthetics case on forest road surface. The shear strength test showed that the internal friction angle at the time when geosynthetics was used was measured larger on average than that in the unreinforced case. Therefore, using geosynthetics case produced more bearing capacity reinforcement effect. The result from the comparison test of internal friction angle by geosynthetics type revealed that the internal friction angle at the time when geotextile case was used was measured larger. That was attributable to the difference between the area of the total cross section of geotextile made in type of non-woven fabric and its material. Plate bearing test showed that the settlement at the time when geosynthetics was used was measured smaller than that in the unreinforced case. Therefore, using geosynthetics produced more bearing power reinforcement effect. The result from the comparison test showed that geogrid case was measured smaller than geotextile case. Henceforth, It is seemed that it will be necessary to keep studying the reinforcement engineering and process of forest road surface which fits the characteristics and conditions of geosynthetics to prevent forest road demage.

The Causes of Deforestation and Loss of Genetic Resources in Bangladesh

  • Islam, Mohammad Saiful;Islam, Mohammad Jahidul;Ahmed, Sheikh Ali;Chun, Su-Kyoung;Chong, Song-Ho;Kim, Jong-In
    • 한국가구학회지
    • /
    • 제18권4호
    • /
    • pp.317-323
    • /
    • 2007
  • Almost all the people, particularly the rural people are directly dependent on the continued productivity of natural resources, like water, soils, forests and fisheries. But the overuse by the extremely high population pressures has degraded the natural resources into severe widespread deforestation. The degradation of natural resources, particularly the plant resources has been a great concern for socio-economic and sustainable development of the country. The Forests in Bangladesh have been depleted and degraded in volume, area, and quantity, thus requiring urgent forest protection by identifying the causes of forest loss. There are so many causes of deforestation and loss of genetic resources such as; the timber industry, which, legal or not, are cutting too many trees; indigenous forest dwellers, having their own types of problems; migrants, who, because of problems in their places of origin, have decided to move to the forests and the government through its Forest Department which is not able or willing to implement suitable policies to regulate the cutting trees and to prevent illegal cutting. Because it is a time consuming task to mitigate the first and second sets of factors, we recommend involving forest dwellers in forestry practices as much as possible and taking necessary steps to alleviate the third and fourth sets and thereby reduce the rate of forest depletion. Accordingly, a number of strategies that should be adopted to halt the loss of remaining forest cover are discussed.

  • PDF

EU Water Framework Directive-River Basin Management Planning in Ireland

  • Earle, R.;Almeida, G.
    • Environmental Engineering Research
    • /
    • 제15권2호
    • /
    • pp.105-109
    • /
    • 2010
  • The European Union (EU) Water Framework Directive (WFD) (2000/60/EC) was transposed into Irish law by Statutory Instrument Nos. 722 of 2003, 413 of 2005 and 218 of 2009, which set out a new strategy and process to protect and enhance Ireland's water resources and water-dependent ecosystems. The Directive requires a novel, holistic, integrated, and iterative process to address Ireland's natural waters based on a series of six-year planning cycles. Key success factors in implementing the Directive include an in-depth and balanced treatment of the ecological, economic, institutional and cultural aspects of river basin management planning. Introducing this visionary discipline for the management of sustainable water resources requires a solemn commitment to a new mindset and an overarching monitoring and management regime which hitherto has never been attempted in Ireland. The WFD must be implemented in conjunction with a myriad of complimentary directives and associated legislation, addressing such key related topics as flood/drought management, biodiversity protection, land use planning, and water/wastewater and diffuse pollution engineering and regulation. The critical steps identified for river basin management planning under the WFD include: 1) characterization and classification of water bodies (i.e., how healthy are Irish waters?), 2) definition of significant water pressures (e.g., agriculture, forestry, septic tanks), 3) enhancement of measures for designated protected areas, 4) establishment of objectives for all surface and ground waters, and 5) integrating these critical steps into a comprehensive and coherent river basin management plan and associated programme of measures. A parallel WFD implementation programme critically depends on an effective environmental management system (EMS) approach with a plan-do-check-act cycle applied to each of the evolving six-year plans. The proactive involvement of stakeholders and the general public is a key element of this EMS approach.

Suspension Culture of Gardenia jasminoides Ellis Cell for Production of Yellow Pigment

  • Kim, Sang-Hwa;Park, Young-Goo;Lee, Yong-Hyun
    • Journal of Microbiology and Biotechnology
    • /
    • 제1권2호
    • /
    • pp.142-149
    • /
    • 1991
  • Gardenia callus was induced in MS medium containing $10{\;}{\mu}M$ of 2,4 diphenoxy acetic acid (2,4-D), $1{\;}{\mu}M$ kinetin, and 3% sucrose in the dark. $B_5$ medium was identified to be the most adequate medium for cell growth. Indole-3-acetic acid (IAA) was better growth regulator than 2,4-D not only for cell growth but slso for carotenoid production. Ligt also played a critical role on synthesis of carotenoid. Gardenia cells grown in $B_5$ medium could utilize a polysaccharide, soluble starch, as a carbon source. The cell growth was stimulated in $B_5$ medium fortified with 0.2% yeast extract. The optimum pH for cell growth was 5.7. High density cultures can be maintained by increasing inoculum size and medium concentration accordingly. Specific growth rate and mass doubling time were 0.095 $day^{-1}$ and 7.3 days, respectively. The cell immobilized in alginate tends to formulate more enlarged vacuoles containing yellow pigment compared with those of suspended cell. Carotenoid content of immobilized cell was about $264.4{\;}{\mu}g/g$ fresh weight (F.W.) corresponding twice of the content of suspended cell ($112.08{\;}{\mu}g/g$ F.W.). The color of gardenia cell was shifted from yellow to red when carbohydrase-secreting fungus, Trichoderma reesei, was co-cultivated with gardenia cells.

  • PDF

Phenotypic Diversity of Shea(Vitellaria Paradoxa C. F. Gaertn.) Populations across Four Agro-Ecological Zones of Cameroon

  • Nafan, Diarrassouba;Divine, Bup Nde;Cesar, Kapseu;Christophe, Kouame;Abdourahamane, Sangare
    • Journal of Crop Science and Biotechnology
    • /
    • 제10권4호
    • /
    • pp.223-230
    • /
    • 2007
  • Vitellaria paradoxa commonly called shea is an important agro forestry and fruit-bearing species present in four agro-ecological zones of Cameroon. The goal of this work was the morphological characterization of certain populations of V. paradoxa which will serve as a necessary step for a subsequent genetic study of the species. Morphological observations related to 20 agronomic traits, studied on 8-13 trees selected from each of the eight shea populations across four different agro-ecological zones located in four provinces of Cameroon were studied. The study showed that there was a variation between the populations, related to the traits measured on the trunk, fruit, nut, and leaf. Three shapes of the tree(ball, broom, and trained), five shapes of the fruit(round, oblong, reversed pear, ovoid, and oblong), three colors of the nut(clear brown, dark brown, and blackish brown) were identified. The principal component analysis(PCA) carried out on the quantitative characters revealed 72% of the total variance expressed on the first and second main axis. This variation was essentially explained by the traits measured on the fruits and on the nuts. The analyses showed that only the traits of the fruits and the nuts were discriminative. The shea populations studied were structured into two distinct groups using these discriminative traits.

  • PDF

원단위법에 의한 비점오염부하량 산정 시 토지피복 특성을 반영하는 고해상도 항공영상의 활용방안 (Application of the High Resolution Aerial Images to Estimate Nonpoint Pollution Loads in the Unit Load Approach)

  • 이범연;이창희;이수웅;하도
    • 환경영향평가
    • /
    • 제18권5호
    • /
    • pp.281-291
    • /
    • 2009
  • In Total Water Pollutant Load Management System of Korea, unit load approach based on land register data is currently used for the estimation of non-point pollutant load. However, a problem raised that land register data could not always reflect the actual land surface coverages which determine runoff characteristics of non-point pollution sources. As a way to overcome this, we tried to establish quantitative relationships between the aerial images (0.4m resolution) which reflect actual land surface coverages and the land registration maps according to the 19 major designated land-use categories in Kyeongan watershed. Analyses showed different relationships according to the land-use categories. Only a few land-use categories including forestry, road and river showed essentially identical and some categories such as orchard, parking lot and sport utility site showed no relationships at all between image data and land register data. Except for the two cases, all the other categories showed statistically significant linear relationships between image data and land register data. The analyses indicate that using high resolution aerial maps is a better way to estimate non-point pollutant load. If the aerial maps are not available, application of the linear relationships as conversion factors of land register data to image data could be an possible option to estimate non-point pollutant loads for the specific land-use categories in Kyeongan watershed.

바이오디젤 보급을 위한 정책 및 시장 현황 (Current Status of Policy and Market for Biodiesel in Korea)

  • 김승수;김기호;신성철;임의순
    • 공업화학
    • /
    • 제18권5호
    • /
    • pp.401-406
    • /
    • 2007
  • 본 총설에서는 국내 바이오디젤 생산과 소비, 품질기준 및 시장현황 등에 대해 살펴보았다. 국내에서 생산되는 바이오디젤의 원료물질은 대부분 대두유와 폐식용유이고 바이오디젤 생산 업체 중 원료물질 다변화를 위한 시도들이 진행되고 있다. 농림부에서도 바이오디젤 국내 생산을 위해 2007년부터 3년간 바이오디젤용 유채생산 시범사업을 추진하고 있다. 2006년 7월 이래로 산업자원부와 정유사간 자발적 협약에 의해 현재 시중에 유통되고 있는 경유는 BD0.5이며, 2007년과 2008년에 158400 MT이 공급될 것으로 예상된다. 산업자원부에서 바이오디젤 보급 확대를 위해 2012년까지 경유에 혼합되는 바이오디젤을 매년 0.5%씩 확대하여 3%까지 늘리겠다는 계획을 발표하였으며, 앞으로 바이오디젤의 보급이 크게 확대될 것으로 전망된다.

Vibration behavior of trapezoidal sandwich plate with functionally graded-porous core and graphene platelet-reinforced layers

  • Liang, Di;Wu, Qiong;Lu, Xuemei;Tahouneh, Vahid
    • Steel and Composite Structures
    • /
    • 제36권1호
    • /
    • pp.47-62
    • /
    • 2020
  • In this study, free vibration behavior of trapezoidal sandwich plates with porous core and two graphene platelets (GPLs) reinforced nanocomposite outer layers are presented. The distribution of pores and GPLs are supposed to be functionally graded (FG) along the thickness of core and nanocomposite layers, respectively. The effective Young's modulus of the GPL-reinforced (GPLR) nanocomposite layers is determined using the modified Halpin-Tsai micromechanics model, while the Poisson's ratio and density are computed by the rule of mixtures. The FSDT plate theory is utilized to establish governing partial differential equations and boundary conditions (B.C.s) for trapezoidal plate. The governing equations together with related B.C.s are discretized using a mapping- generalized differential quadrature (GDQ) method in the spatial domain. Then natural frequencies of the trapezoidal sandwich plates are obtained by GDQ method. Validity of current study is evaluated by comparing its numerical results with those available in the literature. A special attention is drawn to the role of GPLs weight fraction, GPLs patterns of two faces through the thickness, porosity coefficient and distribution of porosity on natural frequencies characteristics. New results show the importance of this permeates on vibrational characteristics of porous/GPLR nanocomposite plates. Finally, the influences of B.C.s and dimension as well as the plate geometry such as face to core thickness ratio on the vibration behaviors of the trapezoidal plates are discussed.

무인 항공 사진측량을 이용한 절토사면의 땅밀림 시계열 분석 (Time Series Analysis of Soil Creep on Cut Slopes Using Unmanned Aerial Photogrammetry)

  • 김남균;최봉진;최재희;전병희
    • 지질공학
    • /
    • 제30권4호
    • /
    • pp.447-456
    • /
    • 2020
  • 연구지역인 강원도 삼척시 도계읍의 사면은 지형변화가 발생하는 지역으로 2009년 사면 절취공사를 수행하여 사면경사완화공법이 적용되었다. 하지만 사면의 상부에 위치한 폐석적치장의 영향으로 2개월 뒤 절취사면의 상부를 확장하여 안정성을 도모하였다. 최근 사면 하부에 위치한 옹벽의 배부름 현상이 발견되고 절취사면의 균열이 나타나 지형변화가 다시 발생하고 있는 것으로 보이고 있다. 이러한 문제를 파악하기 위하여 본 연구에서는 UAV를 이용하여 사진측량을 수행해 지형변화가 발생하는지 확인하고자 하였다. 2019년 4월과 10월 각각 정사영상을 추출하고 Digital Surface Model(DSM)를 추출하여 고해상도의 지형변화를 비교 분석하였다. 10월의 지형은 4월의 지형형상을 그대로 유지한채 앞으로 밀려 나간 모습을 보여 이러한 지형변화는 땅밀림인 것으로 분석하였다.