• Applied Microscopy
• /
• v.36 no.4
• /
• pp.251-258
• /
• 2006

Crystal-bearing cells are rarely encountered in the softwoods and their regular occurrence, e.g., in species of Abies, Picea, Ginkgo, and Pinus, is of considerable diagnostic significance. Thus, this study discusses the distribution and types of crystals in North American Abies species to provide additional information for wood anatomy and identification through light and scanning electron microscopies. Prismatic crystals, elongate crystal s, and styloids are identified, in descending order of frequency, in Abies concolor, A. grandis. and A. magnifica, A. nobilis (=A. procera), A. lasiocarpa, and A. amabilis but not in A. balsamea and A. fraseri. Differently from the other species, A. lasiocarpa shows the tendency of more elongate crystals and styloids than prismatic crystals. A. concolor contains crystal sands, prismatic crystals, elongate crystals, and styloids both in the axial and ray parenchyma cells, whereas the other species show prismatic crystals, elongate crystals, and styloids only in the ray parenchyma cells. Ray parenchyma cells containing crystal sand and axial parenchyma cells having crystal sand, prismatic crystals, elongate crystals, and styloids are probably reported here for the first time in A. concolor. In conclusion, the presence or absence of crystals appears to be the most powerful diagnostic character for separating A. concolor, A. grandis, and A. magnifica from A. nobilis (=A. procera), A. lasiocarpa, A. amabilits, A. balsamea, and A. fraseri.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1251-1251
• /
• 2001

The routine analysis of milk chemical components is of major importance both for the management of animals in dairy farms and for quality control in dairy industries. NIRS technology is an analytical technique which greatly simplifies this routine. One of the most critical aspects in NIRS analysis of milk is sample preparation and analysis modes which should be fast and straightforward. An important difficulty when obtaining NIR spectra of milk is the high water content (80 to 90%) of this product, since water absorbs most of the infrared radiation, and, therefore, limits the accuracy of calibrating for other constituents. To avoid this problem, the DESIR system was set up. Other ways of radiation-sample interaction adapted for liquids or semi-liquids exist, which are practically instantaneous and with limited or null necessity of sample preparation: Transmission and Folded Transmission or Transflectance. The objective of the present work is to compare the precision and accuracy of milk calibration equations in two analysis modes: Reflectance (dry milk) and Folded Transmission (liquid milk). A FOSS-NIR Systems 6500 I spectrophotometer (400-2500 nm) provided with a spinning module was used. Two NIR spectroscopic methods for milk analysis were compared: a) folded transmission: liquid milk samples in a 0.1 pathlength sample cell (ref. IH-0345) and b) reflectance: dried milk samples in glass fibre filters placed in a standard ring cell. A set of 101 milk samples was used to develop the calibration equations, for the two NIR analysis modes, to predict casein, protein, fat and dry matter contents, and 48 milk samples to predict Somatic Cell Count (SCC). The calibrations obtained for protein, fat and dry matter have an excellent quantitative prediction power, since they present $r^2$ values higher than 0.9. The $r^2$ values are slightly lower for casein and SCC (0.88 and 0.89 respectively), but they still are sufficiently high. The accuracy of casein, protein and SCC equations is not affected by the analysis modes, since their ETVC values are very similar in reflectance and folded transmission (0.19% vs 0.21%; 0.16% vs 0.19% and 55.57% vs 53.11% respectively), Lower SECV values were obtained for the prediction of fat and dry matter with the folded transmission equations (0.14% and 0.25% respectively) compared to the results with the reflectance ones (0.43% and 0.34% respectively). In terms of accuracy and speed of analytical response, NIRS analysis of liquid milk is recommended (folded transmission), since the drying procedure takes 24 hours. However, both analysis modes offer satisfactory results.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.18 no.2
• /
• pp.113-120
• /
• 2009

Embryonic lethal abnormal visual (elav) is a lethal gene in Drosophila inducing the abnormal development and function of nervous system. We cloned a Bm-elav gene by bioinformatics and biological experiment, based on sequence of ELAV protein and dbEST of Bombyx mori. The full-length of Bm-elav cDNA is 1498 bp, contains a 906 bp open read frame (ORF) encoding a precursor of 301 amino acid residues with a calculated molecular weight of 34 kDa and pI of 8.99. Bm-ELAV protein precursor contains three RNA recognition motifs (RRM) in $24{\sim}91$, $110{\sim}177$ and $222{\sim}295$ bit amino acid residues respectively, and belongs to RNA-binding protein family. Bm-ELAV shared varying positives, ranging from 56% to 60% (Identities from 41% to 45%), with RRM from other species of Xenopus tropicalis, Apis mellifera, Tribolium castaneum, Branchiostoma belcheri and Drosophila. Gene localization indicated that Bm-elav is a single-copy gene, gene mapping within 12-chromosome from 7916.68 knt to 7918.16 knt region of nscaf2993. Spatiotemporal expressions pattern analysis revealed that Bm-elav expressed higher in most tested tissues and developmental stages in whole generation, such as silk gland, fat body, midgut, hemopoietic organ and ovary, but almost no expression in terminated diapause eggs. This suggested that the expression of Bm-elav in early developmental embryonic stages might induce abnormal development like in Drosophila. Cloning of the Bm-elav gene enables us to test its potential role in controlling pests by transferring the gene into field lepidopteran insects in the future.

• Geophysics and Geophysical Exploration
• /
• v.21 no.3
• /
• pp.162-170
• /
• 2018

The purpose of this study is to understand the ground change of large scale mountainous region and to estimate the active weak zone using geophysical exploration (electrical resistivity and refraction seismic explorations) in large scale deep landslide area located in Wanjugun, Jeollabukdo. We also analyzed the characteristics of deep landslides occurred in metamorphic rocks region and confirmed the approximate scale. As a result of comparative analysis of N-value by standard penetration test (SPT), low resistivity anomaly, and tension crack identified from field investigation, a discontinuity in soil layer was estimated at 10 ~ 15 m below the surface. Based on this results, the distribution pattern of active weak zone was confirmed between the discontinuity in soil layer and estimation line of bedrock.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1995.10a
• /
• pp.10-13
• /
• 1995

Butanol can be manufactured by chemical synthesis or by bacterial fermentation of carbohydrate-containing materials. Today the principal commercial source of n-butanol is n-butyraldehyde, obtained from the Oxo reaction of propylene. When crude oil price was sky-rocketed in late 70's and subsequently the price of petrochemical products raised, butanol production from renewable resources such as agricultural and forestry products once gained research interests.

• The Korean Journal of Mycology
• /
• v.51 no.1
• /
• pp.1-6
• /
• 2023

Tilia mandshurica trees with rust symptoms have consistently been noticed during disease surveys in Korea since 2006. Based on the morphological examination and molecular sequence analysis of the internal transcribed spacer and large subunit of ribosomal DNA, Pucciniastrum tiliae was identified as the causal fungus of rust disease. This is the first report of P. tiliae infection on T. mandshurica in Korea.

• The Korean Journal of Mycology
• /
• v.51 no.4
• /
• pp.307-311
• /
• 2023

Powdery mildew anamorphs were collected from Orixa japonica (Rutaceae) in Korea. Based on the morphology and molecular phylogeny derived from the internal transcribed spacer regions and the large subunit gene of the rDNA, the fungus was identified as Erysiphe orixae. This powdery mildew species has been known to be endemic to Japan. This is the first report on E. orixae in Korea.

• Structural Engineering and Mechanics
• /
• v.30 no.4
• /
• pp.501-512
• /
• 2008

The axisymmetric problem of a functionally graded annular plate is considered by extending the theory of functionally graded materials plates suggested by Mian and Spencer (1998). In particular, their expansion formula for displacements is adopted and the hypothesis that the material parameters can vary along the thickness direction in an arbitrary continuous fashion is retained. However, their analysis is extended here in two aspects. First, the material is assumed to be transversely isotropic, rather than isotropic. Second, the plate is no longer tractions-free on the top and bottom surfaces, but subject to uniform loads applied on the surfaces. The elasticity solutions are given for a uniformly loaded annular plate of functionally graded materials for a total of six different boundary conditions. Numerical results are given for a simply supported functionally graded annular plate, and good agreement with those by the classical plate theory is obtained.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.24 no.4
• /
• pp.11-17
• /
• 2022

Ginseng hydroponic cultivation was cultivated as a nutrient solution and the growth was investigated 60 days later. The length(cm) increased from EC1.0 and EC2.0 concentrations to 5.47cm before, followed by EC0.5, 2.5, 1.5, and 0.0. The weight(g) increased from EC1.0 concentration to 2.39g before, followed by EC1.5, 2.5, 0.5, 0.0 and 2.0. The width(mm) increased from EC1.0 concentration to 1.9mm than before, followed by EC2.5, 0.5, 1.5, 2.0, and 0.0. In the ginseng growth experiment according to nutritional components, the average length of NO₃-N mixed experiment increased to 0.33cm, the average weight of 0.04g, and the average width of 0.35mm. In the experiment in which NH₄-N was mixed without NO₃-N, the growth was reduced to 0.37cm in average length, 0.03g in average weight, and 0.22mm in average width. In an experiment in which germanium(Ge) is mixed with a nutrient component, the average length is increased to 0.33cm, the average weight is increased to 0.04g, and the average width is increased to 0.35mm, but in an experiment excluding germanium(Ge), the growth is reduced to 0.11cm, the average weight is 0.04g, and the average width is 0.03mm.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.25 no.2
• /
• pp.12-19
• /
• 2023

This study conducted an experiment with EC 1.0ms/cm ratio and excellent soil conditions for germination in ICT-based ginseng process cultivation. The first growth survey was conducted before transplantation of ginseng 1-year roots grown by seeding ginseng in the process cultivation, conventional cultivation and a second growth comparison survey was conducted after 3 months of growth. In the results, it was confirmed that ginseng grown in the process cultivation grew more than in the field. As a result of comparing the contents of 11 ginsenosides of 1-year and 2-year-old ginsenosides in the process cultivation and conventional cultivation ginseng, it was confirmed that the content of the process cultivation ginseng was higher than that of practice cultivation ginseng. In conclusion, conventional cultivation ginseng grows due to various factors under the natural cultivation environment, but process cultivation can secure the growth stability of ginseng by allowing stable soil and environmental control, so continuous research is needed in the future.