• 한국운동역학회지
• /
• 제17권4호
• /
• pp.169-179
• /
• 2007

The purpose of this study was to investigate the relations between the segments of the body and to qualitatively analyze coordination pattern of joints and segments during Sweep Shot movement in Ice Hockey, by utilizing coordination variables was angle vs. angle plots. By the utilization the three dimensional anatomical angle cinematography, the angles of individual joint and segment according to sweep shot in ice hockey. The subjects of this study were five professional ice hockey players. The reflective makers were attached on anatomical boundary line of body. For the movement analysis three dimensional cinematographical method(APAS) was used and for the calculation of the kinematic variables a self developed program was used with the LabVIEW 6.1 graphical programming(Johnson, 1999) program. By using Eular's equations the three dimensional anatomical Cardan angles of the joint and ice hockey stick were defined. The three dimensional anatomical angular displacement and coordination pattern of trunk and Upper limb(shoulder-elbow, elbow-wrist linked system) showed important role of sweep shot in ice hockey. As the result of this paper, for the successful movement of sweep shot in ice hockey, it is most important role of coordination pattern of trunk-shoulder, shoulder-elbow and elbow-wrist. specially turnk movememt as a proximal segment. Coordination pattern of Upper Limb(upperarm-forearm-hand) of Sweep Shot movement in Ice Hockey that utilizes coordination variables seems to be one of useful research direction to understand basic control mechanisms of Ice hockey sweep shooting linked system skill. this study result showed flexion-extension, adduction-abduction and internal-external rotation of trunk are important role of power and shooting direction coordination pattern of upper Limb of Sweep Shot movement in Ice Hockey.

• 문화기술의 융합
• /
• 제8권3호
• /
• pp.507-514
• /
• 2022

본 연구에서는 출산 경험이 있는 여성을 대상으로 젖병 세척기 사용 시 손목 회전 동작에서 나타나는 근활성도 및 세척 방법에 따른 세척 청결도, 사용성 평가를 비교 분석하고자 한다. 이를 위하여 자동 젖병 세척기와 수동 젖병 세척기 사용 시 전완근의 근활성도, 세척 청결도는 장비를 활용하여 정량 평가하였으며, 변인들의 효과 분석을 실시하여 다음과 같은 결론을 얻었다. 첫째, 근활성도는 자동 젖병 세척기가 수동 젖병 세척기를 사용할 때 보다 낮은 것으로 나타났다. 둘째, 청결도는 자동세척(정방향+역방향)시 세척력이 제일 우수한 것으로 판단되며, 그 다음으로 자동세척(정방향), 수동세척 순으로 나타났다. 셋째, 젖병 세척기 사용에 대한 사용성 평가는 자동 젖병 세척기가 수동 젖병 세척기에 비하여 높은 만족도를 보였다. 이러한 결론을 통해 자동 젖병세척기 사용에 대한 효과성을 입증함으로서 본 연구는 향후 제품 고도화의 기초자료로 활용할 수 있을 것으로 판단된다.

• 한국콘텐츠학회논문지
• /
• 제13권2호
• /
• pp.348-358
• /
• 2013

본 연구는 컴퓨터 마우스 사용으로 인한 근골격계 질환을 예방하기 위해 개발한 랩보드(lap board)의 효과를 알아보고자 하였다. 연구참여자는 20대의 근골격계 증상이 없는 대학생 10명이었으며, 랩보드에서 마우스를 사용할 때와 책상에서 마우스를 사용할 때 상지의 움직임, 근전도, 작업수행도 및 주관적 불편도의 차이를 비교분석하였다. 동작분석결과, 어깨 굽힘(shoulder flexion), 어깨 안쪽돌림(shoulder internal rotation) 및 아래팔 엎침(pronation)의 평균 각도가 랩보드와 책상에서 마우스 작업 간에 유의한 차이가 나타났다(p<0.05). 그러나 랩보드와 책상에서 마우스 작업을 할 때의 근활성도, 수행도 및 주관적 불편도는 차이가 나타나지 않았다. 랩보드를 사용할 때 작업자의 상지는 책상에서 보다 몸통에 가깝게 위치하였으며, 랩보드를 선호하는 학생은 10명 중 6명이었다. 컴퓨터 마우스 작업으로 인한 근골격계 질환 예방을 위한 진전된 연구가 수행되기를 기대한다.

• 대한감각통합치료학회지
• /
• 제6권1호
• /
• pp.1-12
• /
• 2008

서론: 본 연구의 목적은 COMPS를 사용하여 저 학령기 아동의 감각통합 기능 수준을 제시하고 감각통합 기능과 학업성취도와의 관련성을 알아보는 것이다. 연구방법: 연구는 2005년 12월 19일부터 20일까지 김해 지역에 소재하고 있는 56개 초등학교 중에서 무작위로 J초등학교와 S초등학교를 선정하였으며 저학년 중 학업성취도를 위한 지필고사를 실시하지않는 1과 3학년을 제외한 2학년 중에서 무작위로 반을 선정하였다. 연구대상은 2학년에 재학 중인 아동으로 남아가 34명, 여아가 35명으로 총 69명이었다. 평가도구는 감각통합 기능을 평가하기 위한 도구로 COMPS와 학업성취도 평가를 위한 국어, 수학 지필고사를 사용하였다. 결과분석은 SPSS 10.0을 사용하였으며 t-검정과 F-검정 그리고 상관분석을 실시하였다. 결과: 저 학령기 아동의 COMPS 점수와 학업성취도간의 상관관계는 통계적으로 유의한 상관성이 없었으나 산점도 그래프로 볼 때, 전완교환반복운동, 비대칭성 경반사에서는 음의 상관관계를 보였으며, 배와위 굴곡위에서는 양의 상관관계를 나타냈다. 전체, 국어, 수학과목의 학업성취도가 높은군과 낮은 군 사이에서 COMPS 점수는 통계적으로 유의한 차이가 없었다. 그러나 국어과목에서는 학업성취도가 높은 군이 학업성취도가 낮은 군보다 환산점수 총점과 변환환산점수가 높았으며, 하위항목에서도 COMPS 점수가 높았다. 수학과목에서는 배와위 굴곡위를 제외한 나머지 항목에서 학업성취도가 낮은 군이 학업성취도가 높은 군보다 COMPS 점수가 높았다. 일반적 특성 중 나이에 따른 COMPS 점수의 차이에 있어서는 통계적으로 유의하였는데, 슬로모션과 배와위 굴곡위 두 개 항목을 제외하고는 나이가 많을수록 COMPS 점수가 높다는 것으로 나타났다(p<0.05). 결론: 본 연구에서 감각통합기능과 학업성취도의 상관성이 통계적으로 유의하게 나타나지는 않았으나 산점도 그래프 상에서는 상관관계를 가지고 있는 것으로 나타났다. 연구에 제시된 저 학령기 아동에 대한 COMPS 점수는 일반 아동의 감각통합 문제를 판별하여 학습과 관련된 문제의 조기판별 및 조기치료를 통해 학습능력 향상을 위한 기회를 제공하는데 도움이 될 것이다.

• 대한정형외과스포츠의학회지
• /
• 제3권1호
• /
• pp.87-91
• /
• 2004

목적: 인라인 스케이트를 타던 중 발생한 골절상을 분석하여 골절의 분포 및 경향을 파악 하고자 한다. 대상 및 방법: 2002년 9월부터 2003년 8월까지 1년간 인라인 스케이트를 타다가 골절이 발생하여 입원 가료 하였던 35명의 환자 중 최소 1년 이상 추시가 가능하였던 20명, 20례를 대상으로 환자의 성별, 연령분포, 부위별 빈도, 동반손상, 숙련도별 손상, 손상 유형 등을 후향적으로 분석하였다. 남자가 18명(90$\%$), 여자가 2명(10$\%$)이었고, 연령대별로는 활동성이 강한 연령층인 21$\~$30세 (6명 30$\%$), 31$\~$40세 (6명 30$\%$)의 순이었다. 결과: 상지골절이 12명(60$\%$)로 하지골절 8명(40$\%$)보다 많았다. 손상 부위별 빈도는 족관절부가 7례(35$\%$)로 가장 많았고, 전완부 4례(20$\%$), 수근부 4례(20$\%$), 주관절 3례(15$\%$), 대퇴부 1례(5%$\%$)의 순이었다. 족관절 골절 손상은 Lauge-Hansen 분류 상, 회외 -외회전 형이 4례로 가장 많았으며, 회외-외전 형이 2례, 회내-외회전 형이 1례였고, 전완부 골절손상과 수근부 골절 손상의 경우에는 요골 원위부 골절 3례, 요골-척골 골절 1례, 주상골 골절 2례, 중수골 골절 2례로 넘어질 때 손으로 짚으면서 발생한 골절의 양상이 많았다. 주관절 골절은 2례에서 과상부 골절이었고 1례에서는 외과 골절 이었다. 성장판 손상이 동반된 소아 골절 3례는 모두 Salt-Harris type II 였으며, 보존적 치료를 시행 하였다. 전체 골절 중 6례는 관절 내 골절 이었다. 동반 손상으로는 타박상이 8명 (42.11$\%$)으로 가장 많았고, 숙련도 별로는 인라인 스케이트를 시작한지 3개월 이내의 초보자들이 8명(40$\%$)으로 가장 많았고, 수상 형태로는 넘어짐과 같은 비접촉성 수상이 14명(70$\%$)으로 접촉성 수상(6명 30$\%$)보다 많았다. 11례 (55$\%$)가 수술적 치료를 받았으며, 9례(45$\%$)는 보존적 치료를 받았고, 추시 중에 특별한 합병증은 발생되지 않았다. 결론: 20$\~$30대의 젊은층의 초보자들에서 족관절부의 골절 손상이 가장 많았으므로, 이에 대한 주의가 필요할 것으로 사료된다

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제30권1호
• /
• pp.83-91
• /
• 2008

The goal of reconstruction following ablative therapy for intraoral cancer is the restoration of form and function to permit a return to activities of daily life. Traditional reconstruction includes split thickness skin grafts, myocutaneous flaps and, more recently, various free flaps. Free flaps provide higher level of functional recovery relative to that seen with other techniques but require the complexity of the technique and microvascular anastomosis and thus, extended surgical time and occasionally a second team for harvesting. The platysma myocutaneous cervical flap is a possible alternative for intraoral reconstruction. It is thin and pliable like the tissue provided by the radial forearm free flap. It can be harvested with enough tissue to close most head and neck ablative defects. There is virtually no donor site morbidity involved. This study evaluated 7 patients affected by intraoral squamous cell carcinoma (SCC). All patients underwent the resection of intraoral SCC with neck dissection and subsequent intraoral reconstruction with the superiorly based platysma myocutaneous cervical flap. Flap-related complications occurred in 3 patients. Adjuvant radiation therapy was performed in 3 patients. Average follow-up was 24.1 months after surgery, with a range of 8 to 42 months. All patients presented self assessment of discomfort associated with intraoral recipient sites and cervical donor sites. However, the neck function measured by two-inclinometer technique was within the normal range during relatively long term follow-up period. Our study concluded that superiorly based platysma myocutaneous cervical flap is good alternative to free flaps, especially for relatively smaller defects and for the defects appropriate for the rotation arc of the flap.

• 구강회복응용과학지
• /
• 제19권3호
• /
• pp.169-183
• /
• 2003

According to our recent investigation that the increase in the occlusal vertical dimension made the appendage muscle strength got higher, the occlusal appliances were made by increasing the occlusal vertical dimension "from the centric relation" position of the mandible. In this experiment, the authors tried to study the change in the appendage muscle strength due to increase in occlusal vertical dimension from intercuspal position(ICP) of mandible with the same subjects and manner as the former experiment. For this study, ten male athletes in a mean age of 23 year who were joined the former study were selected. All the subjects had a complete or almost complete set of natural teeth and reported no subjective symptoms of temporomandibular disorders. Upper and lower casts were mounted on the semi-adjustable articulator at the intercuspal position and a point was marked on the attached gingival area between the right canine and the right 1st. premolar in each upper and lower cast. From the points, the occlusal vertical dimension was increased by 2mm, 3.5mm and 5mm, and then each 10 maxillary type occlusal splint at each 3-increased position were fabricated with heat curing clear acrylic resin. Including the intercuspal position, the 3 kinds of occlusal splints were placed on the subjects individually, and then isokinetic muscle strength on 7 parts of the human appendage which are shoulder, knee, ankle, wrist, forearm, elbow and hip was measured with the CYBEX 6000 SYSTEM (Lumex, NewYork, USA). The results were as follows: The highest mean value in muscular strength was shown at the position of 2mm-increased vertical dimension. The muscle strength during internal/external rotation of shoulder and knee, plantarflexion of ankle, flexion of elbow, and flexion and extension of hip at the increased occlusal vertical dimension position were significantly higher than them at the intercuspal position (p<0.05). Only in view of the increase in the appendage muscle strength, regardless of the way of making the occlusal splints by elevating the occlusal vertical dimension from the centric relation position or intercuspal position, the occlusal splints had an effect on the increase of isokinetic muscle strength at the occlusal vertical dimension which increased within the proper range on the habitual arc of closure.

• 대한인간공학회지
• /
• 제36권3호
• /
• pp.183-196
• /
• 2017

Objective: The purpose of this research was to assess the agreement between job physical risk factor analysis by ergonomists using ergonomic methods and physical examinations made by occupational physicians on the presence of musculoskeletal disorders of the upper extremities. Background: Ergonomics is the systematic application of principles concerned with the design of devices and working conditions for enhancing human capabilities and optimizing working and living conditions. Proper ergonomic design is necessary to prevent injuries and physical and emotional stress. The major types of ergonomic injuries and incidents are cumulative trauma disorders (CTDs), acute strains, sprains, and system failures. Minimization of use of excessive force and awkward postures can help to prevent such injuries Method: Initial data were collected as part of a larger study by the University of Utah Ergonomics and Safety program field data collection teams and medical data collection teams from the Rocky Mountain Center for Occupational and Environmental Health (RMCOEH). Subjects included 173 male and female workers, 83 at Beehive Clothing (a clothing plant), 74 at Autoliv (a plant making air bags for vehicles), and 16 at Deseret Meat (a meat-processing plant). Posture and effort levels were analyzed using a software program developed at the University of Utah (Utah Ergonomic Analysis Tool). The Ergonomic Epicondylitis Model (EEM) was developed to assess the risk of epicondylitis from observable job physical factors. The model considers five job risk factors: (1) intensity of exertion, (2) forearm rotation, (3) wrist posture, (4) elbow compression, and (5) speed of work. Qualitative ratings of these physical factors were determined during video analysis. Personal variables were also investigated to study their relationship with epicondylitis. Logistic regression models were used to determine the association between risk factors and symptoms of epicondyle pain. Results: Results of this study indicate that gender, smoking status, and BMI do have an effect on the risk of epicondylitis but there is not a statistically significant relationship between EEM and epicondylitis. Conclusion: This research studied the relationship between an Ergonomic Epicondylitis Model (EEM) and the occurrence of epicondylitis. The model was not predictive for epicondylitis. However, it is clear that epicondylitis was associated with some individual risk factors such as smoking status, gender, and BMI. Based on the results, future research may discover risk factors that seem to increase the risk of epicondylitis. Application: Although this research used a combination of questionnaire, ergonomic job analysis, and medical job analysis to specifically verify risk factors related to epicondylitis, there are limitations. This research did not have a very large sample size because only 173 subjects were available for this study. Also, it was conducted in only 3 facilities, a plant making air bags for vehicles, a meat-processing plant, and a clothing plant in Utah. If working conditions in other kinds of facilities are considered, results may improve. Therefore, future research should perform analysis with additional subjects in different kinds of facilities. Repetition and duration of a task were not considered as risk factors in this research. These two factors could be associated with epicondylitis so it could be important to include these factors in future research. Psychosocial data and workplace conditions (e.g., low temperature) were also noted during data collection, and could be used to further study the prevalence of epicondylitis. Univariate analysis methods could be used for each variable of EEM. This research was performed using multivariate analysis. Therefore, it was difficult to recognize the different effect of each variable. Basically, the difference between univariate and multivariate analysis is that univariate analysis deals with one predictor variable at a time, whereas multivariate analysis deals with multiple predictor variables combined in a predetermined manner. The univariate analysis could show how each variable is associated with epicondyle pain. This may allow more appropriate weighting factors to be determined and therefore improve the performance of the EEM.