• 한국안전학회지
• /
• 제20권2호
• /
• pp.169-174
• /
• 2005

최근 산업현장 전반에 걸쳐 작업관련성 근골격계질환의 발생이 증가하고 있으며 그 피해의 규모도 점점 확대되어 가고 있다. 뿐만 아니라, 과거에는 주로 중량물 취급 또는 단순반복적인 작업등에 의해서 발생하였지만 최근에는 대부분의 생산현장에서 컴퓨터를 이용한 자동화가 이루어지고 가정용 PC가 널리 보급됨에 따라 컴퓨터의 사용과 관련한 근골격계질환의 발생이 증가하고 있다. 많은 사람들이 컴퓨터의 사용과 관련한 불편함 및 통증을 호소하면서 각종 보조도구들이 개발 및 판매되고 있으나 대부분 그 효과가 입증되지 않은 상태로 사용되고 있어서 오히려 이러한 보조도구의 사용이 근골격계질환의 발생위험성을 더 높아지게 할 수도 있다. 본 연구에서는 마우스 사용 시 보조도구로 이용되는 전완 지지대의 사용에 대하여 그 효과를 실험을 통하여 평가하였다. 본 실험에서는 Borg's scale과 근전도(Electromyography : EMC)를 이용하여 측정하였으며 분산분석(Analysis of Variance : ANOVA)을 통해 유의성을 검증하였다. 측정자료를 분석한 결과 전완지지대'의 사용이 오히려 작업의 효율을 떨어뜨리고 작업자가 느끼는 불편함 및 통증의 정도와 근육의 활동량을 증가시킴을 알 수 있었다.

• Journal of Mechanical Science and Technology
• /
• 제17권12호
• /
• pp.2004-2009
• /
• 2003

The purpose of this study is to define how wrist motion is affected by different postures and supporting devices and to discover functional range of wrist motion for keyboard typing. The range of wrist motion (ROM) needed for fourteen experienced typists to type on a computer keyboard was measured by flexible and biaxial electrogoniometers. The most frequent wrist motion during typing was in extended and ulnarly deviated positions in both wrists. Range of wrist motion was similar in both wrists. The average ROM for keyboard typing with the typists' own posture was about 39 in flexion/extension (FEM) and 29 in radial/ulnar deviation (RUD) in both wrists. The range of wrist motion was significantly reduced to 30 in FEM and 27 in RUD with use of either wrist or forearm supporting devices, which suggests that these devices might help to relieve fatigue, discomfort, or pain during and/or after typing. Results of this study will be of interest to clinicians and helpful to those who are professionally or non-professionally involved in typing.

• 한국산업보건학회지
• /
• 제18권2호
• /
• pp.141-148
• /
• 2008

To prevent musculoskeletal disorders(MSD) for dental hygiene students, who will potentially be at high risk of developing MSD while performing oral prophylaxis practice, an MSD prevention education program was designed and was offered to a group of dental hygiene students to find whether the program is effective. Before the program started and three months after the program ended, changes in the students' posture were filmed to observe them. The final subjects for analysis included 30 students in the experimental group and 41 students in the control group. To verify differences between the experimental and the control groups, repeated measures ANOVA was carried out before and after the program. After the education program, the experimental group's RULA scores for neck, left upper arm, right forearm, and wrist, RULA A score on both left and right side, RULA B score on left side, and total RULA score were significantly lowered during the operation on the upper jaw, compared with that of the control group. And, during the operation on the lower jaw, the experimental group's RULA A score, RULA B score, and total RULA score were very significantly lowered. The results of this study suggest the MSD prevention education program is effective in preventing the disorder. Thus, the program can be utilized as an education program for preventing MSDs during dental hygiene students' oral prophylaxis practice and clinical practice.

• PNF and Movement
• /
• 제19권1호
• /
• pp.147-152
• /
• 2021

Purpose: This study was conducted to investigate the functional differences of the two heads of the biceps brachii by measuring the functions in supination according to pronation by the angle of the flexion of the elbow joint, except for the activities of the elbow flexors. Methods: This study was conducted with 25 healthy men in their 20s. At a glenohumeral-joint 0˚ flexion posture, angles of flexion of the elbow joint of 0˚, 30˚, 60˚, 90˚, and 120˚ were randomly provided, and they were asked to perform supination and pronation with an elastic band. Using an eight-channel surface electromyogram, the muscle activities of the long and short heads of the biceps brachii were measured. The activities of the short and long heads according to the angle were analyzed using a one-way ANOVA, and as a post-test, LSD was employed. Results: The analysis of the impact of the resistance of the elastic band in supination on the differences in the muscle activities in the short and long heads suggests there was a significant difference between 0˚ and 30˚ (p < 0.05). Conclusion: In supination according to forearm pronation, the long head had greater action in the early flexion posture of the elbow joint, and it is judged that the ratio of the flexion of the elbow joint according to the actions of the biceps brachii was considered small.

• PNF and Movement
• /
• 제21권1호
• /
• pp.47-52
• /
• 2023

Purpose: This study aims to examine the functional difference in the long and short heads of the biceps brachii by investigating the onset time of muscle contractions in the biceps brachii in the supination motion according to whether the flexor of the elbow joint is excluded. Methods: This study was conducted with 21 healthy men aged in their 20s. While performing forearm pronation at an elbow flexion angle of 90 degrees, the onset time of muscle contractions in the long and short heads of the biceps brachii was measured and compared in a posture where the humerus is placed on a table and the posture is lifted against gravity. Using an independent samples t-test, the difference in the onset time of muscle contractions in the long and short heads of the biceps brachii was analyzed. Results: The onset time of the long head was shorter if the flexor activity of the elbow joint was excluded, while that of the short head of the biceps brachii was shorter if it was not excluded. Conclusion: It is noted that the long head of the biceps brachii mainly functions as a supinator muscle, while the short head of the biceps brachii plays a role in stabilizing and maintaining flexion of the elbow joint.

• 한국의류학회지
• /
• 제22권7호
• /
• pp.963-968
• /
• 1998

A study was conducted to investigate the effect of cooling hands of feet on human thermoregulation in the cold. Eight young (22$\pm$1 yr) and eight aged (69$\pm$4 yr) men volun-teered as subjects They stayed at 1$0^{\circ}C$ in the supine posture during the experiment which included hands or feet exposure to the air for 20 minutes. Hand Exposure (HE) and Foot Exposure (FE) were conducted in radomized order and the baseline was kept before HE and FE. Core temperatures, limb skin temperatures adn thermal sensations were measured. Obtained data were analyze using t-test and correlation. Rectal and esophageal tem-peratures increased in the young (YG) and in aged (AG). Change rate of esophageal temperature (Tes) was maintained higher during FE than HE while rectal temperature showed no differences between YG and AG, and between HE and FE. Hand and foot skintemperature in YG and AG decreased similarly during HE and Fe. Forearm skin temperature during HE decreased while leg skin temperature during FE showed no change HE and Fe. It was concluded that the lower cooling. Furthermore, the increase of Tes was greater in young men than aged men. It is also suggested that the wearing behavior can be differently modified between young and aged men.

• 로봇학회논문지
• /
• 제13권4호
• /
• pp.265-271
• /
• 2018

The recent prosthetic technologies pursue to control multi-DOFs (degrees-of-freedom) hand and wrist. However, challenges such as high cost, wear-ability, and motion intent recognition for feedback control still remain for the use in daily living activities. The paper proposes a multi-channel knit band sensor to worn easily for surface EMG-based prosthetic control. The knitted electrodes were fabricated with conductive yarn, and the band except the electrodes are knitted using non-conductive yarn which has moisture wicking property. Two types of the knit bands are fabricated such as sixteen-electrodes for eight-channels and thirty-two electrodes for sixteen-channels. In order to substantiate the performance of the biopotential signal acquisition, several experiments are conducted. Signal to noise ratio (SNR) value of the knit band sensor was 18.48 dB. According to various forearm motions including hand and wrist, sixteen-channels EMG signals could be clearly distinguishable. In addition, the pattern recognition performance to control myoelectric prosthesis was verified in that overall classification accuracy of the RMS (root mean squares) filtered EMG signals (97.84%) was higher than that of the raw EMG signals (87.06%).

• 한국의류학회지
• /
• 제46권4호
• /
• pp.613-623
• /
• 2022

This study developed a functional prototype jacket designed to reduce loads on the upper extremities of workers performing repetitive motions in the same posture for extended periods of time. Dynamic taping lines were applied to the upper extremities, and three dimensional (3D) supporters were inserted in the abdomen and back waist areas corresponding to the core muscles. Clothing pressure on the upper-extremity dynamic taping lines was set to two levels (proto P1 and proto P2), and the 3D supporters were designed in three types (proto FW, proto FW/BW, proto FW/BW/BBX). According to the subjective pressure perceived on each part of the upper extremities, the level proto P1 pressure was preferred. The proto FW/BW/BBX 3D supporter was rated as excellent, and the perceived pressure was ranked as satisfactory. The prototype jacket performed upper-extremity load reduction when the upper-extremity clothing-pressure level was set to 1.8 kPa, 2.1 kPa, and 2.4 kPa on the upper arm, forearm, and wrist regions, respectively, and when 3D supporters were installed in the abdomen and back of the waist with the addition of a back band.

• 한국운동역학회지
• /
• 제14권3호
• /
• pp.203-218
• /
• 2004

The purpose of this study was to analyze the comparisons of the kinematical variables when performing Yoko Ukemi(side breakfall) by three Stage in Judo. The subjects were four male judokas who were trainees Y. I. University Squad members and the Yoko Ukemi were filmed by two S-VHS 16mm video cameras(60fields/sec.). The selected times were subject to KWON 3D analysis program and kinematical analysis to compare variables of three Yoko Ukemi. Temporal variables(total time-required : TK, TR by each phase), the body part touched order on the mat and COG variables were computed through video analysis while performing right Yoko Ukemi by three stage. From the data analysis and discussion, the following conclusions were drawn : 1. Temporal variables : total time-required(TR) when performing Yoko Ukemi(side breakfall) by each stage, the first stage(full squat posture: FP : 1.11sec.) showed the shortest time, the next was 3rd(Shizenhontai, straight natural posture: NP : 1.41sec.), and 2nd(Jigohontai, straight defensive posture, DP : 1.42sec.), respectively- 2. TR when performing Yoko Ukemi(side breakfall) by each stage, and phase : the first phase(take of phase, average 0.68sec.) showed the longest time, next was the third phase(ukemi phase, 0.39sec.), and the second phase(air phase, 0.23sec.), respectively. 3. When performing yore Ukemi the body part touched order and TR on the mat : hip(0.94sec.) showed the shortest time, the next was elbow hand(0.97sec.), back(0.98sec.), and shoulder(1.04sec.) order. The hip part touched on the mat the first, but slap the mat in order to alleviate the shock try hand palm and forearm before receiving impact (difference 0.03sec,) 4. Vertical COG variables in each event by each stage : e1(ready position, average 78.33cm) moved the highest, the next was e2(jumping position, 70.14cm), e3(transition position, average 64.00cm), e4(landing position, average 35.99cm), and e5(ukemi position, average 18.32cm) order, gradual decrease respectively. And the difference of COG were showed in initial by each stage, because position fo Yoko Ukemi was difference by each stage in preparation position, but in accordance with executing of Ukemi phase that difference of COG was by decreasing, almost equal displacement in e4(landing) and e5(Ukemi)position finally.

• 대한인간공학회지
• /
• 제19권2호
• /
• pp.15-31
• /
• 2000

The aim was to evaluate the prevailing ergonomic and psychosocial conditions regarding low back injury in an automobile assembly system. This study consisted of two parts. In the first part of the study, analytic biomechanical model and NIOSH guidelines were applied to evaluate risk levels of low back injury for automobile assembly jobs. Total of 246 workers were analysed. There were 20 jobs having greater back compressive forces than 300kg at L5/S1. Also, there were 44 jobs over Action Limit with respect to 1981 NIOSH guidelines. This might in part be explained by the ergonomic conditions of the company analysed generally being good, with a relatively low duration of 'combined' extreme work posture. The relationship between psychosocial factors and low back injury was examined in the second part of the study. It has recently been recognized that overall reaction to working conditions was influenced by a range of factors, some of which were physical and some psychosocial. The psychosocial environment surrounding the work place may contribute to the perception of risk and eventual ill-health. A battery of questionnaires concerning the psychosocial stress based on PWI(Psychosocial Well-being Index) and musculoskeletal pain symptoms at low back was completed by 246 workers at the same plant. Results showed that 207 out 246 workers experienced the symptoms and 27 workers were diagnosed as patients. Two groups(low stressed, high stressed) based on PWI score had no significant relationships with both symptoms and results of diagnosis. However, sensitivities for symptoms and diagnosis by PWI were 91.3% and 92.6% respectively. Finally, relationships between physical work load and psychosocial stress were analysed. Specifically, some postural factors {vertical deviation angle of forearm, horizontal deviation angle of upperarm, vertical deviation angle of thigh, etc) were highly correlated with psychosocial stress. The results illustrated that PWI scores were associated with some physical workloads. However, psychosocial stress levels couldn't be well related with the pain symptom as well as the actual incidence of low back injury since pain or discomfort regarding low back injury were more complex than that of other musculoskeletal disorders.