• 제목/요약/키워드: Forcing function

검색결과 89건 처리시간 0.022초

섹터모드의 로스비하우어비츠 파동과 균형을 이루는 고도장 (Geopotentinl Field in Nonlinear Balance with the Sectoral Mode of Rossby-Haurwitz Wave on the Inclined Rotation Axis)

  • 정형빈;박자린
    • 한국지구과학회지
    • /
    • 제28권7호
    • /
    • pp.936-946
    • /
    • 2007
  • 기울어진 자전축을 갖는 회전계에서, 일정한 각속도로 회전하는 동서풍이 있는 경우에 대해서 로스비하우어비츠 파동의 섹터모드(적도에 대한 반구 비대칭의 첫 번째 모드)와 균형을 이루는 지위고도장을 해석적으로 유도하였다. 균형장은 발산방정식으로부터 시간변화를 제거하고 라플라시안 연산자를 역산함으로써 구하였다. 역산은 비선형항의 계산과 포이슨 방정식의 해를 구하는 두 단계의 연산과정으로 이루어져 있다. 두 번째 단계에서, 구면조화함수로 표현되는 강제력의 항은 구면조화함수의 선형관계를 이용하였고, 그 이외의 항은 구면조화함수를 적분함으로써 구하였다. 균형장은 여섯 개의 동서파수 성분으로 표현됨이 드러났다. 본 연구에서 구한 균형장은 적도에 대하여 비대칭의 구조를 가지기 때문에, 대칭의 구조만을 가지는 것에 비하여 미분방정식의 수치해의 검종법으로서의 활용도가 높다. 일정한 각속도를 갖는 배경 동서풍이 지구의 자전각속도와 같거나 1/2에 해당하는 경우에는, 일부 동서파수 성분이 제거되는 것으로 나타났다. 이론적으로 구한 균형장은 정교한 수치모델을 통하여 구한 균형장과 거의 정확하게 같은 것으로 밝혀져, 이론적 해의 타당성이 입증되었다. 마지막으로, 로스비하우어비츠 파동의 섹터모드와 균형을 이루는 지위고도장의 안정성을 장기간시간적분을 통하여 살펴보았다.

전송제어를 통한 DCF의 성능 향상 (Performance Improvement of DCF through Transmission Control)

  • 박재성
    • 한국통신학회논문지
    • /
    • 제41권12호
    • /
    • pp.1811-1813
    • /
    • 2016
  • DCF (Distributed Coordination Function)는 송신노드들이 경합 윈도우 중에서 임의로 송신 대기 시간을 결정함으로써 노드 사이의 채널 경합을 분산적으로 해결한다. 그러나 경합 윈도우의 최대 크기는 제한적이므로 송신 노드의 수가 많아지는 경우 송신 충돌 확률이 증가한다. 본 논문에서는 이와 같은 문제를 해결하기 위해 소수 게임 (MG: Minority Game) 이론을 기반으로 전송제어 기법을 제안한다. 각 노드는 MG 규칙에 따라 타 노드와의 정보 교환 없이 자신의 이득을 극대화하기 위해 분산적으로 송신 여부를 결정한다. 모의실험을 이용한 정량적 성능 평가를 통해 제안 기법은 DCF의 성능을 송신 충돌 확률 측면에서 향상시킨다는 것을 보였다.

텍사스 연안의에 의한 연안저층 제트의 생성 역학 (Generation mechanisms of coastal low level jets associated with baroclinicity along the Texas Gulf coast)

  • 최현
    • 한국해양학회지
    • /
    • 제20권2호
    • /
    • pp.28-39
    • /
    • 1985
  • 저층 jet와 야간 최대 연안표층풍의 유도 mechanism을 텍사스주의 Port Aransas 와 Victoria지역에서 1976년 6월부터 1980년 8월까지 관측된 바람자료를 사용하여 경압모델에 의해 연구되었다. 이모델은 forcing function인 종관 및 중기압 경도, 마찰력과 대기안정도를 고려하여 개발된다. 연구결과는 야간최대 연안표층풍 에 대해 저층 jet가 95%의 출현빈도를 보여준다. 여름철에는 경사지형에 의한 경압 성이 thermal field의 일변화를 초래한다. 이 온도풍이 낮에는 탁월한 남풍의 풍속을 감소시키고 밤에는 증가시킨 다. 야간대기안정도는 마찰력 유리를 유도하므로 야간 저층 jet를 강화한다. 해안에서는 중립안정도가 지배적이고 또 저층 jet로부터 운동 량의 연직전이는 야간 최대연안표층풍을 형성한다. 저층 jet의 출현고도는 역전층과 의 뚜렷한 관계를 보여주지 않으며, 이 모델에 의한 계산결과는 관측치와 잘 일치 한다.

두 유저 MISO 간섭 채널에서 불완전한 채널 정보에 기반한 빔포밍 게임 (Beamforming Games with Quantized CSI in Two-user MISO ICs)

  • 이정훈;이진;류종열
    • 한국정보통신학회논문지
    • /
    • 제21권7호
    • /
    • pp.1299-1305
    • /
    • 2017
  • 본 논문에서는 다중 안테나를 사용하는 두 개의 송신단이 각각 하나의 안테나를 가지고 있는 수신단을 서비스 할때 구성되는 두 유저 간섭 채널에서 불완전한 채널 정보를 사용하는 송신단들의 빔포밍 게임을 고려한다. 빔포밍 게임에서는 송신단(i.e., 플레이어)이 자신들의 전송률(i.e., 보상)을 높이기 위해서 경쟁을 하고, 빔포밍 기법을 위해서는 완전한 채널 상황에서 최적이라고 알려진 maximum ratio transmission (MRT) 기법과 zero forcing (ZF) 빔포밍 기법을 선형으로 결합하는 기법(i.e., 전략)을 사용한다. 우리가 제안하는 게임에서는 송신단이 불완전한 채널 정보를 사용하므로, 최적의 전략을 찾더라도 그 전략이 유효하지 않을 수 있다. 본 논문에서는 불완전한 채널 정보로부터 양자화 오차의 영향을 고려한 송신단의 효율적인 빔포밍 전략을 제안한다.

다중 사용자 다중 안테나 하향링크 채널에서 에너지 효율 향상을 위한 기지국 활성 안테나 수 최적화 기법 (Optimization of the Number of Active Antennas for Energy-Efficiency in the MIMO Broadcast Channel)

  • 최승규;김도훈;이충용
    • 전자공학회논문지
    • /
    • 제51권5호
    • /
    • pp.29-34
    • /
    • 2014
  • 본 논문에서는 다중 사용자 다중 안테나 하향링크 채널에서 에너지 효율을 향상시키기 위하여 zero-forcing beamforming (ZFBF) 전처리 필터 기반의 기지국 활성 안테나 수 최적화 기법을 제안한다. 제안하는 기법에서는 최적의 안테나 수를 찾는 연산과정의 복잡도를 줄이기 위하여 사용자의 순시 채널 이득 대신 ZFBF의 평균 채널 이득을 사용한다. 그리고 분수함수 형태의 목적함수를 차를 이용한 목적함수로 변환하여 최적의 안테나 수와 최대 에너지 효율을 찾는 과정을 반복 수행하여 문제를 해결한다. 모의실험을 통해 제안하는 기법의 에너지 효율은 exhaustive search 방법으로 찾은 최대 에너지 효율과 거의 동일함을 확인한다.

Monitoring of Climate Change of Northeast Asia and Background Atmosphere in Korea

  • Oh, Sung-Nam;Chung, Hyo-Sang;Choi, Jae-Cheon;Bang, So-Young;Hyun, Myung-Suk
    • 한국환경과학회:학술대회논문집
    • /
    • 한국환경과학회 2003년도 International Symposium on Clean Environment
    • /
    • pp.232-235
    • /
    • 2003
  • In general, the parameters of climate change include aerosol chemical compounds, aerosol optical depth, greenhouse gases(carbon dioxide, CFCs, methane, nitrous oxide, tropospheric ozone), ozone distribution, precipitation acidity and chemical compounds, persistent organic pollutants and heavy metals, radioactivity, solar radiation including ultra-violet and standard meteorological parameters. Over the last ten years, the monitoring activities of Korea regarding to the climate change have been progressed within the WMO GAW and ACE-Asia IOP programs centered at the observation sites of Anmyeon and Jeju Gosan islands respectively. The Greenhouse gases were pointed out that standard air quality monitoring techniques are required to enhance data comparability and that data presentation formats need to be harmonized and easily understood. Especially, the impact of atmospheric aerosols on climate depends on their optical properties, which, in turn, are a function of aerosol size distribution and the spectral reflective indices. Aerosol optical depth and single scattering albedo in the visible are used as the two basic parameters in the atmospheric temperature variation studies. The former parameter is an indicator of the attenuation power of aerosols, while the latter represents the relative strength of scattering and absorption by aerosols. For aerosols with weak absorption, surface temperature decreases as the optical depth increases because of the domination of backscattering. For aerosols with strong absorption, however, warming could occur as the optical depth increases. The objective of the study is to characterize the means, variability, and trends of Greenhouse gases and aerosol properties on a regional basis using data from its baseline observatories in Korea peninsula. A further goal is to understand the factors that control radiative forcing of the greenhouse and aerosol.

  • PDF

유한요소법을 이용한 해수유동 해석 (I) (Analysis of Tidal Flow Using the Frequency Domain Finite Element Method (I))

  • 권순국;고덕구;조국광;김준현
    • 한국농공학회지
    • /
    • 제33권4호
    • /
    • pp.73-83
    • /
    • 1991
  • A numerical simulation of a 2-dimensional tidal flow in a shallow sea was performed using the frequency domain finite element method. In this study, to overcome the inherent problems of a time domain model which requires high eddy viscosity and small time steps to insure numerical stability, the harmonic function incorporated with the linearized function of governing equations was applied. Calculations were carried out using the developed tidal model(TIDE) in a rectangular channel of lOm(depth) X 4km (width) X 25km(length) under the condition of tidal waves entering the channel closed at one end for both with and without bottom friction damping. The predicted velocities and water levels at different points of the channel were in close agreement with less than 1 % error between the numerical and analytical solutions. The results showed that the characteristics of the tidal flow were greatly affected by the magnitude of tidal elevation forcing, and not by on surface friction, wind, or the linear bottom friction when the value was less than 0.01. For the optimum size of grid to obtain a consistent solution, the ratio between the length of the maximum grid and the tidal wave length should be less than 0.0018. It was concluded that the finite element tidal model(TIDE) developed in this study could handle the numerical simulation of tidal flows for more complex geometrical conditions.

  • PDF

A Validation Method for Solution of Nonlinear Differential Equations: Construction of Exact Solutions Neighboring Approximate Solutions

  • Lee, Sang-Chul
    • International Journal of Aeronautical and Space Sciences
    • /
    • 제3권2호
    • /
    • pp.46-58
    • /
    • 2002
  • An inverse method is introduced to construct benchmark problems for the numerical solution of initial value problems. Benchmark problems constructed through this method have a known exact solution, even though analytical solutions are generally not obtainable. The solution is constructed such that it lies near a given approximate numerical solution, and therefore the special case solution can be generated in a versatile and physically meaningful fashion and can serve as a benchmark problem to validate approximate solution methods. A smooth interpolation of the approximate solution is forced to exactly satisfy the differential equation by analytically deriving a small forcing function to absorb all of the errors in the interpolated approximate solution. A multi-variable orthogonal function expansion method and computer symbol manipulation are successfully used for this process. Using this special case exact solution, it is possible to directly investigate the relationship between global errors of a candidate numerical solution process and the associated tuning parameters for a given code and a given problem. Under the assumption that the original differential equation is well-posed with respect to the small perturbations, we thereby obtain valuable information about the optimal choice of the tuning parameters and the achievable accuracy of the numerical solution. Illustrative examples show the utility of this method not only for the ordinary differential equations (ODEs) but for the partial differential equations (PDEs).

선체주위의 점성유동 계산을 위한 3차원 공간 격자계 생성방법 (Development of 3-D Field Grid Generating Method for Viscous Flow Calculation around a Practical Hull Form)

  • 김우전;김도현;반석호
    • 대한조선학회논문집
    • /
    • 제36권1호
    • /
    • pp.70-81
    • /
    • 1999
  • 선체주위의 점성유동을 계산하기 위해서는 수치계산을 위한 3차원 공간 격자계가 필요하다. 본 논문에서는 타원형 미분 방정식인 Poisson 방정식의 해를 이용하여 3차원 공간 격자계를 구성하는 방법을 개발하였다. 2차원에서 사용되던 Sorenson방법을 3차원으로 확장하여 격자계의 분포 및 교차 각도를 지정하는 함수를 정의하게 하였다. 미분방정식의 해는 weighting function scheme과 modified strongly implicit procedure를 사용하여 구하였고, 3차원 내부 격자계와 경계면과의 매끄러운 연결을 위해 trans-finite interpolation을 이용하였다. 적용예로서 컨테이너 운반선과 대형 유조선 주위의 난류유동 계산을 위한 공간 격자계를 보였다.

  • PDF

JsSandbox: A Framework for Analyzing the Behavior of Malicious JavaScript Code using Internal Function Hooking

  • Kim, Hyoung-Chun;Choi, Young-Han;Lee, Dong-Hoon
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제6권2호
    • /
    • pp.766-783
    • /
    • 2012
  • Recently, many malicious users have attacked web browsers using JavaScript code that can execute dynamic actions within the browsers. By forcing the browser to execute malicious JavaScript code, the attackers can steal personal information stored in the system, allow malware program downloads in the client's system, and so on. In order to reduce damage, malicious web pages must be located prior to general users accessing the infected pages. In this paper, a novel framework (JsSandbox) that can monitor and analyze the behavior of malicious JavaScript code using internal function hooking (IFH) is proposed. IFH is defined as the hooking of all functions in the modules using the debug information and extracting the parameter values. The use of IFH enables the monitoring of functions that API hooking cannot. JsSandbox was implemented based on a debugger engine, and some features were applied to detect and analyze malicious JavaScript code: detection of obfuscation, deobfuscation of the obfuscated string, detection of URLs related to redirection, and detection of exploit codes. Then, the proposed framework was analyzed for specific features, and the results demonstrate that JsSandbox can be applied to the analysis of the behavior of malicious web pages.