• Tuberculosis and Respiratory Diseases
• /
• v.87 no.3
• /
• pp.378-385
• /
• 2024

Background: Intrapleural fibrinolytic therapy (IPFT) has been used as an effective agent since 1949 for managing complicated pleural effusion and empyema. Several agents, such as streptokinase, urokinase (UK), and recombinant tissue plasminogen activator (rt-PA), have been found to be effective with variable effectiveness. However, a head-tohead controlled trial comparing the efficacy of the most frequently used agents, i.e., UK and rt-PA (alteplase) for managing complicated pleural effusion has rarely been reported. Methods: A total of 50 patients were randomized in two intervention groups, i.e., UK and rt-PA. The dose of rt-PA was 10 mg, and that of UK was 1.0 lac units. UK was given thrice daily for 2 days, followed by clamping to allow the retainment of drugs in the pleural space for 2 hours. rt-PA was instilled into the pleural space twice daily for 2 days, and intercostal drainage was clamped for 1 hour. Results: A total of 50 patients were enrolled into the study, of which 84% (n=42) were males and 16% (n=8) were females. Among them, 30 (60%) patients received UK, and 20 (40%) patients received alteplase as IPFT agents. The percentage of mean±standard deviation changes in pleural opacity was -33.0%±9.9% in the UK group and -41.0%±14.9% in the alteplase group, respectively (p=0.014). Pain was the most common adverse side effect, occurring in 60% (n=18) of the patients in the UK group and in 40% (n=8) of the patients in the alteplase group (p=0.24), while fever was the second most common side effect. Patients who reported early (within 6 weeks of onset of symptoms) showed a greater response than those who reported late for the intervention. Conclusion: IPFT is a safe and effective option for managing complicated pleural effusion or empyema, and newer agents, such as alteplase, have greater efficacy and a similar adverse effect profile when compared with conventional agents, such as UK.

• Journal of The Korean Institute of Defense Technology
• /
• v.5 no.3
• /
• pp.8-17
• /
• 2023

The current weapon system is operated as a complex weapon system with various standards and protocols applied, so there is a risk of failure in smooth information exchange during combined and joint operations on the battlefield. The interoperability of weapon systems to carry out precise strikes on key targets through rapid situational judgment between weapon systems is a key element in the conduct of war. Since the Korean military went into service, there has been a need to change the configuration and improve performance of a large number of software and hardware, but there is no verification system for the impact on interoperability, and there are no related test tools and facilities. In addition, during combined and joint training, errors frequently occur during use after arbitrarily changing the detailed operation method and software of the weapon/power support system. Therefore, periodic verification of interoperability between weapon systems is necessary. To solve this problem, rather than having people schedule an evaluation period and conduct the evaluation once, AI should continuously evaluate the interoperability between weapons and power support systems 24 hours a day to advance warfighting capabilities. To solve these problems, To this end, preliminary research was conducted to improve defense interoperability capabilities by applying natural language processing techniques (①Word2Vec model, ②FastText model, ③Swivel model) (using published algorithms and source code). Based on the results of this experiment, we would like to present a methodology (automated evaluation of interoperability requirements evaluation / level measurement through natural language processing model) to implement an automated defense interoperability evaluation tool without relying on humans.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.4
• /
• pp.17-22
• /
• 2024

The war that broke out on October 7, 2023 is prolonging and expanding into the Middle East. Although the damage from war is increasing, humanitarian aid to the Gaza Strip has been halted due to UNRWA's deviant actions. Powerful countries have suspended support, and the UN is appealing for support for the Gaza Strip. All damage is borne by civilians in the Gaza Strip, especially women, children, and the elderly. Israel has selected an evacuation zone and evacuation route in the Gaza Strip and established a humanitarian aid route in the border area. However, Hamas's resistance in underground tunnels, using civilian-dense areas and civilian facilities such as hospitals and schools as shields, further amplified civilian casualties. This Israel-Hamas war requires the international community to approach it from a human security perspective. We must strengthen the UN's functions and roles to ensure that humanitarian supplies reach the field and humanitarian intervention forces ensure human dignity and basic rights. We must restore the credibility of the UN's role through the Israel-Hamas war. In addition, Korea should urge the introduction of humanitarian aid and goods, and provide humanitarian goods such as daily necessities and medicine. We must also prepare for deployment as a member of the UN peacekeeping force in the future. These activities will help Korea develop into a model country that fulfills its role as a 'global pivotal nation' and will have a virtuous cycle of international support in the event of a future crisis on the Korean Peninsula.

• The Korean Journal of Air & Space Law and Policy
• /
• v.18
• /
• pp.135-183
• /
• 2003

Aerospace force is a determining factor in a modem war. The combat field is expanding to space. Thus, the legitimacy of establishing aerospace force is no longer an debating issue, but "how should we establish aerospace force" has become an issue to the military. The standard limiting on the military use of space should be non-aggressive use as asserted by the U.S., rather than non-military use as asserted by the former Soviet Union. The former Soviet Union's argument is not even strongly supported by the current Russia government, and realistically is hard to be applied. Thus, the multi-purpose satellite used for military surveillance or a commercial satellite employed for military communication are allowed under the U.S. principle of peaceful use of space. In this regard, Air Force may be free to develop a military surveillance satellite and a communication satellite with civilian research institute. Although MTCR, entered into with the U.S., restricts the development of space-launching vehicle for the export purpose, the development of space-launching vehicle by the Korea Air Force or Korea Aerospace Research Institute is beyond the scope of application of MTCR, and Air Force may just operate a satellite in the orbit for the military purpose. The primary task for multi-purpose satellite is a remote sensing; SAR sensor with high resolution is mainly employed for military use. Therefore, a system that enables Air Force, the Korea Aerospace Research Institute, and Agency for Defense Development to conduct joint-research and development should be instituted. U.S. Air Force has dismantled its own space-launching vehicle step by step, and, instead, has increased using private space launching vehicle. In addition, Military communication has been operated separately from civil communication services or broadcasting services due to the special circumstances unique to the military setting. However, joint-operation of communication facility by the military and civil users is preferred because this reduces financial burden resulting from separate operation of military satellite. During the Gulf War, U.S. armed forces employed commercial satellites for its military communication. Korea's participation in space technology research is a little bit behind in time, considering its economic scale. In terms of budget, Korea is to spend 5 trillion won for 15 years for the space activities. However, Japan has 2 trillion won annul budget for the same activities. Because the development of space industry during initial fostering period does not apply to profit-making business, government supports are inevitable. All space development programs of other foreign countries are entirely supported by each government, and, only recently, private industry started participating in limited area such as a communication satellite and broadcasting satellite, Particularly, Korea's space industry is in an infant stage, which largely demands government supports. Government support should be in the form of investment or financial contribution, rather than in the form of loan or borrowing. Compared to other advanced countries in space industry, Korea needs more budget and professional research staff. Naturally, for the efficient and systemic space development and for the prevention of overlapping and distraction of power, it is necessary to enact space-related statutes, which would provide dear vision for the Korea space development. Furthermore, the fact that a variety of departments are running their own space development program requires a centralized and single space-industry development system. Prior to discussing how to coordinate or integrate space programs between Agency for Defense Development and the Korea Aerospace Research Institute, it is a prerequisite to establish, namely, "Space Operations Center"in the Air Force, which would determine policy and strategy in operating space forces. For the establishment of "Space Operations Center," policy determinations by the Ministry of National Defense and the Joint Chief of Staff are required. Especially, space surveillance system through using a military surveillance satellite and communication satellite, which would lay foundation for independent defense, shall be established with reference to Japan's space force plan. In order to resolve issues related to MTCR, Air Force would use space-launching vehicle of the Korea Aerospace Research Institute. Moreover, defense budge should be appropriated for using multi-purpose satellite and communication satellite. The Ministry of National Defense needs to appropriate 2.5 trillion won budget for space operations, which amounts to Japan's surveillance satellite operating budges.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.4
• /
• pp.396-408
• /
• 2008

Statement of problem: Within the elastic limit of the screw, the greater the preload, the tighter and more secure the screw joint. However, additional tensile forces can incur plastic deformation of the abutment screw when functional loads are superimposed on preload stresses, and they can elicit the loosening or fracture of the abutment screw. Therefore, it is necessary to find the optimum preload that will maximize fatigue life and simultaneously offer a reasonable degree of protection against loosening. Another critical factor in addition to the applied torque which can affect the amount of preload is the joint connection type between implant and abutment. Purpose: The purpose of this study was to evaluate the influence of tightening torque on the implant-abutment screw joint stability. Material and methods: Respectively, three different amount of tightening torque (20, 30, and 40 Ncm) were applied to implant systems with three different joint connections, one external butt joint and two internal cones. The initial removal torque value and the postload (cyclic loading up to 100,000 cycles) removal torque value of the abutment screw were measured with digital torque gauge. Then rate of the initial and the postload removal torque loss were calculated for the comparison of the effect of tightening torques and joint connection types between implant and abutment on the joint stability. Results and conclusion: 1. Increase in tightening torque value resulted in significant increase in initial and postload removal torque value in all implant systems (P < .05). 2. Initial removal torque loss rates in SS II system were not significantly different when three different tightening torque values were applied (P > .05), however GS II and US II systems exhibited significantly lower loss rates with 40 Ncm torque value than with 20 Ncm (P < .05). 3. In all implant systems, postload removal torque loss rates were lowest when the torque value of 30 Ncm was applied (P < .05). 4. Postload removal torque loss rates tended to increase in order of SS II, GS II and US II system. 5. There was no correlation between initial removal torque value and postload removal torque loss rate (P > .05).

• Journal of the Korea Concrete Institute
• /
• v.21 no.3
• /
• pp.347-358
• /
• 2009

Recently, it is getting into a good situation for the flat-plate slab system to be applied. The flat-plate slab without beam, however, is often too weak to control deflection properly compared to other typical slab-beam structures, for which the post-tension method is generally regarded as one of best solutions. The post-tension (PT) method can effectively control deflection without increase of slab thickness. Despite this good advantage, however, the application of PT method has been very limited due to cost increase, technical problems, and lack of experiences. Therefore, in order to reduce difficulties on applying full PT method under the current domestic circumstances and to enhance constructability of PT system, this research proposed the partial PT method with top jacking anchorage applied in a part of span as need. For the top jacking anchorage system, the efficiency of deflection control shall be considered in detail because it can vary widely depending on the location of anchorage that can be placed anywhere as need, and tensile stresses induced at back of the anchorage zone also shall be examined. Therefore, in this study, analysis were performed on the efficiency of deflection control depending on the location of anchorage and on tensile stresses or forces using finite element method and strut and tie model in the proposed top jacking anchorage system. The proposed jacking system were also applied to the floor slabs at a construction site to investigate its applicability and the analysis results of slab behavior were compared to the measured values obtained from the PT slab constructed by the partial PT method. The result of this study indicates that the partial PT method can be very efficiently applied with little cost increase to control deflection and tensile stresses in the region as a need basis where problem exists.

• Journal of the Korean Geographical Society
• /
• v.30 no.1
• /
• pp.16-34
• /
• 1995

This study aims to analyze the impact of cement industry on region change. For this study Maepo-Eub was selected as study area, where three cement factories are located. The data for analysis were obtained from interviews, questionaire surveys and the employee list of each cement factory. The analytic procedures for this study are as follows: 1) The change of regional employment was analyzed by development was industry in terms of the permanent address, education level, occupational status of the employee. 2) The degree of population growth are analyzed by developmental staae of the industry. Some conclusions from this study follows: 1) As these cement factories were built at Maepo in the 1960's, there were plenty of employment opportunities. Thus many technicians and workers flooded in Maepo-Eub. in the 1970's with the expansion of production facilities therewere much more immigrants to the industrial region, while there were outflow in the neighboring rural areas. In the 1980's the opportunity for the employment of cement factories have been decreased due to the introduction of the automation processes and larger, sized machines. Among the employee of three cement factories the native of Chungcheongbukdo (65%; in them Danyang 52%, Jecheon 32%) is dominant, the second is from Kangwon-do (13%), and the third is from Kyungsangbuk-do (11%) adjacent to Chungcheongbuk-do. It means that there are more employment opportunity in the near places of cement factories. 2) In the period of 1960's study area had experineed rapid social increase in population by the development of cement industry. That is, cement industries created new job opportunities and attracted large population concentration into this area. In the period of 1970's the population of the industrial region have increased continuously, while the population of neighboring rural areas have decreased. In the period of 1980's the population of Maepo decreased steadily because of decrease of labour forces through automation and commuting. Thus in the early stage of idustrial development large population concentrated in the neighboring villages of cement factories, and formed residential areas, commercial areas and service areas. As agricultural and was encroached, rural people left their regions to live in the more convenient suburbs. 3) People engaged in cement industry think that cement industry has a favorable influence on regional development, such as creating job opportunity, raising income level, developing business and service sector, and leading high economic growth. While farmers and some people think that cement industries as a pollution causing factories have a harmful influence on regional development, sucha as injuring the crops, causing environmental pollution, and being harmful to health. If pollution problems are solved, I think Maepo will play an important role as a regional center which can offer employment opportunity, business and service function to pheripheral rural areas, and raise a income level.

• Journal of Life Science
• /
• v.20 no.4
• /
• pp.543-548
• /
• 2010

The purpose of this study was to examine the differences in kinetics between 6 months of rehabilitation training and 12 months of rehabilitation training after total hip arthroplasty. 10 unilateral THA participants performed kinetic tests. Three dimensional kinematics and hip flexors and abductors electromyography (EMG) were collected during each trial. T-test was used for statistical analysis (p<0.05). There was no significant difference in EMG data between the two groups, but the mean comparison EMG data was higher in the 12 months rehabilitation training group than the 6 months rehabilitation training group. The moment value was found with motion-dependent interaction analyzing method which was used by Feltner and Dapena. There was no significant difference between moment values of the two groups. There was no significant difference between ground reaction forces of the two groups; however, there were some differences shown in Fz (vertical reaction force) between the two groups ($892{\pm}104\;N$, $820{\pm}87\;N$). The first peak impact force was about 9% lower in the 12 months group compared to the 6 months group. The second peak active force was nearly equal between the two groups. More research is necessary to determine exactly what constitutes optimal rehabilitation training biomechanics for patients with total hip arthroplasty.

• Journal of Korean Medical classics
• /
• v.5
• /
• pp.151-199
• /
• 1992

A study on Bang-Yak-Hap-Py$\breve{u}$n, one of the most widely-known Korean medicine books, has been conducted and the findings are as follows:the political and social background at the end of Yi-dynasty amidst the inflow of western civilization and the aggression of foreign forces can be seen as a historical period of trial, when civilization and independence had to be preserved at the same time, during the period, the social trend was to pursue a rapid practical solution rather than a profound theory. Responding to this trend, simple and easy medical science became to prevailand the representative medicine book of this kind was Bang-Yak-Hap-Py$\breve{u}$n. 1. Bang-Yak-Hap-Py$\breve{u}$n was written comprising the characteristics of simple and easy medical science with a view to popularizing-collection of logics, easy readability, medical science in time, etc. 2. Bang Yak-Hap-Py$\breve{u}$n, rich and grand in content, came out of Dong-$\breve{U}$i-Bo-Gam at the right moment as a pragmatic guide book of Korea medical practice symbolizing Korean spirit. 3. Do-yun Whang whose pen name was Hye-Am was born in Changwon, Kyungnam-do as the 18th descendant of Changwon Whang family. He engaged in medical practice in Seoul and wrote and edited Boo-Bang-Py$\breve{u}$n-Ram. $\breve{U}$i-Jong-Son-Ik, $\breve{U}$i-J$\breve{u}$ng-Son-Ik-Bu-Yeo, $\breve{U}$i-Bang-Whan-Tu, ect. and made his son, Pil-Su follow him and let him edit Bang-Yak-Hap-Py$\breve{u}$n, which put $\breve{U}$i-Bang-Whal-Tu and Son-Ik-Bon-Cho together. 4. The construct of Bang-Yak-Hap-Py$\breve{u}$n can be subdivied into three parts: herbs of 34 classes and 514 kinds were arranged on the upper part and $\breve{U}$i-Bang-Whal-Tu was arranged on the middle end lower part. Such arrangement can be very effective in clinics. 5. Bang-Yak-Hap-Py$\breve{u}$n as a curative book of Korean medical science has been a necessary another ego for many Korean medical practioners. It also played a great role of enhancing Korean oriental medical science to be widely used by Koreans. On the other hand, it produced a side effect of emergence of employed medical practioner who lacked in scholastic aptitude. 6. Tens or newly edited Bang-Yak-Hap-Py$\breve{u}$n have been issued. Among them, Jung-Jeong, Bang-Yak-Hap-py$\breve{u}$n, J$\breve{u}$ng-Mak-Bang-Yak-Hap-Py$\breve{u}$n. By$\breve{u}$n-J$\breve{u}$ng-Bang-Yak-Hap-Py$\breve{u}$n, and By$\breve{u}$n-J$\breve{u}$ng-Bang-Yak-Jung-Jeon have been widely known. Lately, Bang-Yak-Hap-Py$\breve{u}$n which includes more symptoms and remedies or is translated into Korean came out in several kinds. 7. The number of korea classical medicinal books quoted in Bang-Yak-Hap-Py$\breve{u}$n is 68, among which Dong-$\breve{U}$i-Bo-Gam Occupies the top in the list enlisting 69 medicinal treatment. This Shows that Dong-$\breve{U}$i-Bo-Gam gave birth to Bang-Yak-Hap-Py$\breve{u}$n.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.4
• /
• pp.815-826
• /
• 1994

Skew bridges are found frequently in new bridge construction due to geographical conditions when new constructing bridges are put across the existing highways, railroads or rivers. This study is to investigate the static behaviors of the steel deck plates of skew bridges which are increasingly used in bridges due to outstanding quality of structural steels, development of welding techniques, in order to reduce dead loads and period of constructions. The static behaviours of steel deck plates are analyzed using general purpose FE code SAP90 by modeling the skewed deck plates with rigorous finite elements, as the skew angles vary. The results of finite element analysis for the behaviors of steel deck plates and concrete slabs in acute, obtuse corners and center of decks are compared and discussed as the skew angles vary from $90^{\circ}$ to $30^{\circ}$. Two types of decks are treated, as isotropic plates and orthotropic plates, respectively. From the results of finite element analysis, it is found that more moments, reactions, and deflections occur at the obtuse corners than at the center of skewed decks regardless of isotropy or orthotropy. Especially, in case of the skewed deck plates with skew angles less than 45 degrees, significantly large discrepancies for the values of those internal forces are shown between the skewed and right deck plates. This study estimates the characteristics of deck behaviors according to skew angles, and proposes limitations of skew angles and the ciritical regions of decks.