• Computers and Concrete
• /
• v.31 no.2
• /
• pp.151-161
• /
• 2023

This paper presents an investigation of variables that cause spurious cracking in numerical modeling of concrete fracture. Spurious cracks appear due to the approximate nature of numerical modeling. They overestimate the dissipated energy, leading to divergent results with mesh refinement. This paper is limited to quasi-static loading regime, homogeneous models, cracking as the only nonlinear mode of deformation and cracking only due to tensile loading. Under these conditions, some variables that can be related to spurious cracking are: mesh alignment, ductility, crack band width, structure size, mesh refinement and load increment size. Case studies illustrate the effect of each variable and convergence analyses demonstrate that, after all, load-increment size is the most important variable. Theoretically, a sufficiently small load increment is able to eliminate or at least alleviate the detrimental influence of the other variables. Such load-increment size might be prohibitively small, rendering the simulation unfeasible. Hence, this paper proposes two alternatives. First, it is proposed an algorithm that automatically find such small load increment size automatically, which not necessarily avoid large computations. Then, it is proposed a double simulation technique, in which the crack is forced to propagate through the localization zone.

• Journal of The Korean Society of Integrative Medicine
• /
• v.5 no.1
• /
• pp.67-74
• /
• 2017

Purpose : Forward head posture is typical neck disorders occur in all people. And this attitude causes a shortening and weakening of the muscles in the body. It also causes excessive extension acts as a reward. This attitude has to change if the pain occurs around the neck and shoulders, and are subjected to unusual stress. Patients with chronic neck pain associated with forward head posture was found to be the more severe the fall of the respiratory, forward head posture poor quality of much breath. The purpose of this study was to compare the effect of changes in forward head posture and neutral head posture on respiratory. Method : Forty volunteers were participated in study and divided into two groups [forward head posture group (n=20) and neutral head posture group (n=20)]. We measured cervical alignment with global postural system to find out a forward head posture. Respiratory function was measured with a SPIROVIT SP-1 equipment and we found out a forced vital capacity (FVC), forced expiratory volume at one second (FEV1) and FEV1/FVC. A pared t-test was used to determine a statistical significance for the pulmonary function variation and a independent t-test was used to determine a statistical significance in the two groups. Results : In the experimental group, FVC and FEV1 were significantly higher in the artificial neutral head posture than in the forward head posture. In the control group, FVC and FEV1 were significantly higher in the neutral head posture than in the forward head posture. FVC, FEV1, and FEV1/ FVC were significantly higher in the neutral head posture of control group than the artificial neutral head posture of experimental group and higher in the artificial forward head posture of control group than the forward head posture of experimental group. Conclusion : In conclusion, neutral head posture is considered to be an important factor in correct posture and improvement of lung function and continuous study of posture correction program for posture imbalance will be needed.

• Journal of Periodontal and Implant Science
• /
• v.28 no.1
• /
• pp.177-185
• /
• 1998

Periodontal disease and/or loss of teeth brings pathologic tooth migration that can result in esthetic and occlusal problems. Diastema and general spacing of the teeth, particularly in the anterior segments of the dentition are frequently developed in individuals with advanced periodontal disease. Thus, the overall treatment plan for a patent with advanced periodontal disease often involves periodontal orthodontic combined therapy. Orthodontic treatment in adults with periodontal disease is restricted to tooth alignment with special caution. Indirect bonding can achieve accurate bracket placement. A 38 year old woman with adult periodontitis was treated by periodontal therapy. Subsequently, her diastema was orthodontically corrected by indirect bonding technique. It must be an appropriate case report of periodontal-orthodontic combined therapy.

• Korean Journal of Materials Research
• /
• v.23 no.1
• /
• pp.13-17
• /
• 2013

The alignments of polystyrene particles of $1{\mu}m$ and $5{\mu}m$ sizes in an aqueous colloidal system were observed by varying the electric field strength, the frequency and the water flow. Spherical mono-dispersed polystyrene particles dispersed in pure water were put into a perfusion chamber; an AC electric field was applied to the Au/Cr electrodes with a 4 mm gap on the glass substrate. The mixture of the $1{\mu}m$ and $5{\mu}m$ sized polystyrene particles at 0.5 vol% concentrations for each size was set in the dielectrophoresis conditions of 1 kHz and 150 V/cm. Large particles of $5{\mu}m$ size were aligned to form chains as the result of the dielectrophoresis force interaction. On the contrary, small particles of $1{\mu}m$ size did not form chains because the dielectrophoresis force was not sufficiently large. When the electric field increased to 250 V/cm, small particles were able to form chains. After the chains were formed from both large and small particles, they began to coalescence as time passed. Owing to the electroosmotic flow of water, wave patterns along the perpendicular direction of the applied electric field appeared at the conditions of 200 Hz and 50 V/cm, when the dielectrophoresis force was small. This wave pattern also appeared for small particles at 1 kHz and 150 V/cm conditions due to the flow of solvent when water was forced to circulate.

• Structural Monitoring and Maintenance
• /
• v.8 no.4
• /
• pp.309-328
• /
• 2021

The objective of this work was to develop a methodology for geodetic monitoring on onshore wind towers, to ascertain the existence of displacements from object points located in the tower and at the foundation's base. The geodesic auscultation was carried out in the Gravatá 01 and 02 wind towers of the Eólica Gravatá wind farm, located in the Brazilian municipality of Gravatá-PE, using a stable Measurement Reference System. To verify the existence of displacements, pins were implanted, with semi-spherical surfaces, at the bases of the towers being monitored, measured by means of high-precision geometric leveling and around the Gravatá 02 tower, concrete landmarks, iron rods and reflective sheets were implanted, observed using geodetic/topographic methods: GNSS survey, transverse with forced centering, three-dimensional irradiation, edge measurement method and trigonometric leveling of unilateral views. It was found that in the Gravatá 02 tower the average rays of the circular sections of the transverse welds (ST) were 1.8431 m ± 0.0005 m (ST01) and 1.6994 m ± 0.0268 m of ST22, where, 01 and 22 represent the serial number of the transverse welds along the tower. The average calculation of the deflection between the coordinates of the center of the circular section of the ST22 and the vertical reference alignment of the ST1 was 0°2'39.22" ± 2.83" in the Northwest direction and an average linear difference of 0.0878 m ± 0.0078 m. The top deflection angle was 0°8'44.88" and a linear difference of ± 0.2590 m, defined from a non-linear function adjusted by Least Squares Method (LSM).

• The KIPS Transactions:PartA
• /
• v.16A no.6
• /
• pp.453-462
• /
• 2009

Studies on software plagiarism detection, prevention and judgement have become widespread due to the growing of interest and importance for the protection and authentication of software intellectual property. Many previous studies focused on comparing all pairs of submitted codes by using attribute counting, token pattern, program parse tree, and similarity measuring algorithm. It is important to provide a clear-cut model for distinguishing plagiarism and collaboration. This paper proposes a source code clustering algorithm using a probability model on extreme value distribution. First, we propose an asymmetric distance measure pdist($P_a$, $P_b$) to measure the similarity of $P_a$ and $P_b$ Then, we construct the Plagiarism Direction Graph (PDG) for a given program set using pdist($P_a$, $P_b$) as edge weights. And, we transform the PDG into a Gumbel Distance Graph (GDG) model, since we found that the pdist($P_a$, $P_b$) score distribution is similar to a well-known Gumbel distribution. Second, we newly define pseudo-plagiarism which is a sort of virtual plagiarism forced by a very strong functional requirement in the specification. We conducted experiments with 18 groups of programs (more than 700 source codes) collected from the ICPC (International Collegiate Programming Contest) and KOI (Korean Olympiad for Informatics) programming contests. The experiments showed that most plagiarized codes could be detected with high sensitivity and that our algorithm successfully separated real plagiarism from pseudo plagiarism.

• Journal of the Korea Computer Graphics Society
• /
• v.26 no.3
• /
• pp.49-59
• /
• 2020

In this paper, we propose a speech animation synthesis specialized in Korean through a rule-based co-articulation model. Speech animation has been widely used in the cultural industry, such as movies, animations, and games that require natural and realistic motion. Because the technique for audio driven speech animation has been mainly developed for English, however, the animation results for domestic content are often visually very unnatural. For example, dubbing of a voice actor is played with no mouth motion at all or with an unsynchronized looping of simple mouth shapes at best. Although there are language-independent speech animation models, which are not specialized in Korean, they are yet to ensure the quality to be utilized in a domestic content production. Therefore, we propose a natural speech animation synthesis method that reflects the linguistic characteristics of Korean driven by an input audio and text. Reflecting the features that vowels mostly determine the mouth shape in Korean, a coarticulation model separating lips and the tongue has been defined to solve the previous problem of lip distortion and occasional missing of some phoneme characteristics. Our model also reflects the differences in prosodic features for improved dynamics in speech animation. Through user studies, we verify that the proposed model can synthesize natural speech animation.

• Proceedings of the KSPS conference
• /
• 1996.10a
• /
• pp.246-246
• /
• 1996

Purpose: Some of the properties of the prosodic phrasing and some acoustic and phonological effects of contrastive focus on the tonal pattern of Seoul Korean is explored based on a brief experiment of analyzing the fundamental frequency(=FO) contour of the speech of the author. Data Base and Analysis Procedures: The examples were chosen to contain mostly nasal and liquid consonants, since it is difficult to track down the formants in stops and fricatives during their corresponding consonantal intervals and stops may yield an effect of unwanted increase in the FO value due to their burst into the following vowel. All examples were recorded three times and the spectrum of the most stable repetition was generated, from which the FO contour of each sentence was obtained, the peaks with a value higher than 250Hz being interpreted as a high tone (=H). The result is then discussed within the prosodic hierarchy framework of Selkirk (1986) and compared with the tonal pattern of the Northern Kyungsang dialect of Korean reported in Kenstowicz & Sohn (1996). Prosodic Phrasing: In N.K. Korean, H never appears both on the object and on the verb in a neutral sentence, which indicates the object and the verb form a single Phonological Phrase ($={\phi}$), given that there is only one pitch peak for each $={\phi}$. However, Seoul Korean shows that both the object and the verb have H of their own, indicating that they are not contained in one $={\phi}$. This violates the Optimality constraint of Wrap-XP (=Enclose a lexical head and its arguments in one $={\phi}$), while N.K. Korean obeys the constraint by grouping a VP in a single $={\phi}$. This asymmetry can be resolved through a constraint that favors the separate grouping of each lexical category and is ranked higher than Wrap-XP in Seoul Korean but vice versa in N.K. Korean; $Align-x^{lex}$ (=Align the left edge of a lexical category with that of a $={\phi}$). (1) nuna-ka manll-ll mEk-nIn-ta ('sister-NOM garlic-ACC eat-PRES-DECL') a. (LLH) (LLH) (HLL) ----Seoul Korean b. (LLH) (LLL LHL) ----N.K. Korean Focus and Phrasing: Two major effects of contrastive focus on phonological phrasing are found in Seoul Korean: (a) the peak of an Intonatioanl Phrase (=IP) falls on the focused element; and (b) focus has the effect of deleting all the following prosodic structures. A focused element always attracts the peak of IP, showing an increase of approximately 30Hz compared with the peak of a non-focused IP. When a subject is focused, no H appears either on the object or on the verb and a focused object is never followed by a verb with H. The post-focus deletion of prosodic boundaries is forced through the interaction of StressFocus (=If F is a focus and DF is its semantic domain, the highest prominence in DF will be within F) and Rightmost-IP (=The peak of an IP projects from the rightmost $={\phi}$). First Stress-F requires the peak of IP to fall on the focused element. Then to avoid violating Rightmost-IP, all the boundaries after the focused element should delete, minimizing the number of $={\phi}$'s intervening from the right edge of IP. (2) (omitted) Conclusion: In general, there seems to be no direct alignment constraints between the syntactically focused element and the edge of $={\phi}$ determined in phonology; all the alignment effects come from a single requirement that the peak of IP projects from the rightmost $={\phi}$ as proposed in Truckenbrodt (1995).