• 한국해양공학회지
• /
• 제30권5호
• /
• pp.374-380
• /
• 2016

The large drift and angle of attack motion of an ROV (Remotely operated vehicle) cannot be modeled using the typical hydrodynamic coefficients of conventional straight running AUVs and specific slender bodies. In this paper, the ROV hull is divided into several simple-shaped components to model the hydrodynamic force and moment. The hydrodynamic force and moment acting on each component are modeled as the components of added mass force and drag using the known values for simple shapes such as a cylinder and flat plate. Since an ROV is operated under the water, the only environmental force considered is the current effect. The target ROV dealt with in this paper has six thrusters, and it is assumed that its maneuvering motion is determined using a thrust allocation algorithm. Tracking simulations are carried out on the ship’s surface near the stern, bow, and midship sections based on the modeling of the hydrodynamic force and current effect.

• Korean Journal of Chemical Engineering
• /
• 제35권12호
• /
• pp.2355-2364
• /
• 2018

We evaluated the effect of particle size and associated dynamics on a hydrocyclone separation process in order to understand the movement of the particle trajectories inside the hydrocyclone via numerical analysis, with particles of acid hydrolysis residues discharged in $TiO_2$ production via the sulfate method as a case study. The values obtained from the numerical simulation were successfully compared with those from experimental tests in the literature, allowing a description of the dynamics of the particles, their acting forces, and their relevant properties together with separation efficiency. The results showed that particle motion is jointly controlled by the drag force, the pressure gradient force and the centrifugal force. With increasing particle size, the influence of the drag force is weakened, whereas that of the centrifugal force and pressure gradient is strengthened. Factors including particle density, slurry viscosity, and inlet slurry flow rate also contribute to a clear and useful understanding of particle motion behavior in the hydrocyclone as a method for improving the separation efficiency.

• 디지털산업정보학회논문지
• /
• 제5권2호
• /
• pp.29-37
• /
• 2009

Recently, the structure of simulation environment is important issue in all fields. In case of the training for operating the machines which are costly such as airplanes or spaceships, simulators could be helpful for decreasing the costs and training effects by simulating real situation. When we get the driving license, too many peoples are waiting for their turns because of limited cars and testing spaces in Korea. To solve this problem, we've designed and developed the basic design for the simulators. We suggested the Computer 3D Simulation Model for practice of a drives's license. The concept of this simulator was from a 3D Racing-game which suit for driving exercise. We provide users with handle-controlled simulation setting in order that users feel reality as if they drive really through this simulator. We also use 'force-feedback' system which give handle vibration in case users collide against obstacles or exceed the line since users can absorb the simulation program and feel the sense for the real. This paper is the study about modeling the driving exercise model made use of 'computer 3D simulation', and producing and utilizing the simulator through this modeling.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2004년도 춘계학술대회 논문집
• /
• pp.131-135
• /
• 2004

강착장치에 의한 지면반력은 착륙과 이륙시 지면과의 상호작용을 나타내며 고도를 감지하여 지면에 접촉하였을 때 지면의 반력을 헬리콥터에 전달해주는 역할을 한다. 비행시뮬레이션에 있어서 강착장치는 비행 중 비행특성에 미치는 영향이 없기 때문에 비행특성 분석용 또는 비행제어용 비행시뮬레이션 프로그램에서는 강착장치를 생략하여 시뮬레이션 하는 경우가 많다. 하지만 훈련의 목적으로 사용하는 경우 착륙과 이륙은 큰 비중을 차지하며 무인기의 함상 착륙과 같은 시뮬레이션에서는 필수적인 요소로 대두되고 있다. 본 논문에서 강착장치는 1자유도의 mass, spring, damper의 간단한 진동시스템을 택하였고, 강착장치의 접촉점인 지면은 고도 0인 평탄한 지면으로 가정하였다. 추후 지면을 6자유도를 가지는 움직이는 평면으로 쉽게 대체할 수 있도록 벡터형식으로 된 모델을 선택하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.411-415
• /
• 2002

In this paper, a mechanical probe for CMM (Coordinate Measuring Machine) with a three-axis force-sensing unit is proposed, which is capable of measuring an actual contact position without the lobbing effect and the pre-travel error. The force-sensing unit detects the external force, which is act on the stylus of CMM during the measuring process. Thus, the contact point of the stylus of CMM can be estimated ken the direction of measured force components. Based on the structural analysis of the proposed CMM probe, the transformation matrix is derived and calibrated so that it shows linear relationships between the estimated force components from the output voltages and the real input forces. And, the relationships are verified through the computer simulation. The results show that the proposed mechanical probe is very useful fur detecting the contacting force components on measuring process of CMM.

• Journal of Magnetics
• /
• 제16권1호
• /
• pp.6-9
• /
• 2011

Spin-motive force has drawn attention because it contains a fundamental physical property. Spin-motive force creates effective electric and magnetic fields in moving magnetization; a vortex is a plausible system for observing the spin-motive force because of the abrupt profile of magnetization. However, the time-averaged value of a spin-motive force becomes zero when a vortex core undergoes gyroscopic motion. By means of micromagnetic simulation, we demonstrates that a non-zero time-averaged electric field induced by spin-motive force under certain conditions. We propose an experimental method of detecting spin-motive force that provides a better understanding of spin transport in ferromagnetic system.

• 항공산업연구
• /
• 통권49호
• /
• pp.56-63
• /
• 1999

• 한국공간정보시스템학회 논문지
• /
• 제12권1호
• /
• pp.76-84
• /
• 2010

실내 공간과 같이 마이크로한 스케일에서의 분석을 위해 다양한 보행시뮬레이션 모델들이 연구 되어 왔으며, 이 중에는 social force 모델과 floor field 모델이 주목을 받는다. 이 중 연산이 복잡한 social force 모델보다는 CA 기반의 floor field 모델이 컴퓨터 시뮬레이션에 더 적합한 모델이라고 할 수 있다. 그러나 Kirchner 등이 제안한 floor field 모델에서는 dynamic field의 연산 시 자신의 dynamic 값에도 영향을 받을 수 밖에 없는 단점을 가지고 있으며, 본 연구에서는 이를 개선한 알고리즘을 제안한다. 본 연구에서는 dynamic field의 데이터 구조를 변경함으로써 자신의 dynamic 값은 배제한 다른 에이젼트의 영향만을 받도록 하였으며, dynamic 값의 초기값을 할당하는 문제도 현실적으로 변경하였다. 본 연구에서 제시된 알고리즘을 테스트하는 데에는 공간 DBMS에 저장된 실제 3차원 건물모델을 사용하여 추후 실내 센서를 이용한 실시간 대피 시스템에 적용할 수 있는 기반이 되도록 하였다.

• 드라이브 ㆍ 컨트롤
• /
• 제21권3호
• /
• pp.46-55
• /
• 2024

In the agricultural machinery field, load analysis is mostly done through field tests. However, field tests are time-consuming and costly. There are also limitations in test conditions due to weather conditions. To overcome these environmental limitations, research on load analysis through simulation in a virtual environment is actively being conducted. This study aimed to select the most appropriate soil particle size for modeling by analyzing the effect of soil particle size on the prediction of draft force of the implement using simulation and soil particle modeling in a virtual environment with the discrete element method (DEM) software. The accuracy was verified by simulating the draft force for the same moving speed by soil particle size. For soil particle modeling, DEM soil modeling was performed by designing soil property measurement procedure. Soil particle correction was performed with a virtual vane shear test. Average DEM simulation results showed an error of 27.39% (19.43~40.66%) compared to actual measured data. The possibility of improvement was confirmed through additional research. Results of this study provide useful information for selecting soil particle size in soil modeling using DEM from the perspective of agricultural machinery research.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.185-186
• /
• 2006

Numerical Simulation of powder die pressing is conducted on Case Study geometry. Influence of fill density distribution and punch kinematics upon green density distribution and punch loading are studied and discussed. Deviations in punch kinematics due to punch deflection influence the most the results in term of density and force.