• Korean Journal of Poultry Science
• /
• v.17 no.2
• /
• pp.101-107
• /
• 1990

Apparent and true metabolizable energy (AME and TME) contents and true amino acid availability (TAAA) values of full-fat seed, oil meal and oil of canola were assayed employing mature Single Comb white Leghorn roosters. For AME, test diets containing 30% level of canola full-fat seed, oil meal, oil meal plus oil or 10% level of oil were fed for a 3-day adaptation period, followed by a 4-day fecal collection period. For TME and TAAA, 30g test diets were force-fed and total excreta were collected for 48 hours, following a 24 hour fasting period. Metabolizable energy values were corrected to zero nitrogen balance(AMEn and TMEn), Canola contained 4,485, 1,984,8,275 and 5,655kcal/kg of AMEn and 4,577, 2,103, 8,487 and 5,630kcal/kg of TMEn for full-fat seed, oil meal, oil and mixture of meal plus oil, respectirely. The mixtures of oil meal plus oil had significantly higher available energy contents than the full-fat seeds (p＜0.01) . In general, TAAA values of full-fat seed were higher than those of oil meal.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.642-648
• /
• 2019

This paper presents a fast back-type transfer device for snack food processing that uses the inertia of transferred material. A conventional conveying system is a drive system that uses a belt conveyor and mechanical crank, which generate noise and vibration and cause environmental pollution. Vibration and noise are reduced in the proposed fast back feeding device by using a counterweight. The crank drive unit was replaced with a linear servomotor, and an equilibrium device was designed to balance the force due to acceleration. This makes it is possible to adjust the forward and backward speed and acceleration through PLC control. A vibration damper device offsets the vibration force of the periodic shock form. The main cause of the vibration was identified through vibration analysis, and reduction measures were established. We verified the effectiveness of the vibration by making a prototype and performing about 10 vibration tests. Because no mechanical transducer is needed, energy loss, noise, and vibration do not occur, and the operating speed is not limited.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.2
• /
• pp.160-178
• /
• 2023

Diagnosis and analysis of occlusal relationships are important factors in prosthetic treatment. A thorough occlusion analysis and evaluation should be performed before treatment to restore a stable interocclusal relationship. Analysis and evaluation are essential during the treatment process and at regular follow-ups. Recently, with the development of dental equipment and digital processing methods, new quantitative analysis methods that can record the patient's occlusal relationship have been introduced. Among them, the T-Scan Novus (Tekscan Inc., S. Boston, MA, USA) displays the strength of the initial contact point and the occlusal contact point of the teeth using a pressure sensor. With this, occlusal contact time of the teeth, anteroposterior and left-right balance of occlusal force can be compared. The Dental prescale II (GC Co., Tokyo, Japan) scans the occlusal contact point using a pressure-sensing film and analyzes the density of the contact point. It can measure the distribution and strength of the occlusal force of the teeth in the most natural occlusion state. Based on this, appropriate prosthetic treatment (four-unit fixed partial denture, removable partial denture, complete denture, and complete oral restoration cases) was performed according to the area and extent of the patient's tooth loss. The patient's occlusion at the first visit, treatment stage, right after treatment, and regular follow-up were compared and evaluated using a quantitative method for appropriate occlusion analysis using T-Scan Novus and Dental prescale II. This report enhances the understanding of occlusion analysis during prosthetic restoration. The results satisfied both the clinician and patients in terms of function and aesthetics.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.17 no.1
• /
• pp.37-43
• /
• 2003

Dam-eum(痰飮) is peculiar pathological product which is caused by functional difficulty in human fluid replacement and that principally originated functional difficulty between Lung(肺), Spleen(脾), Kidney(腎) and Sam-Cho(三焦). Dam-eum(痰飮) comes into force to disorder about ascending, decending, in and out of human energy circulation and frequently raises functional difficulty in human fluid replacement. As a result of that, it has much effect on action of Spirit(神志). After literatual study on the effect of Dam-eum(痰飮) on Spirit(神志), the result were obtained as follows : Dam-eum is not affecting to Spirit by itself. When Dam-eum is Positive Symptom(實證), Yang Symptom(陽證), mainly it affects to Spirit with Pung(風), Hwa(火), Kyung(驚), Youl(熱). And when it is Negative Symptom(虛症), it mostly affects with 脾胃虛寒, 心血不足. Dam-eum is a factor of causing disharmony between Heart & Kidney(心腎), Heart & Liver(心肝), Stomach & Gall Bladder Line(胃膽經) by 痰迷心竅, 痰火擾心. So it brings out troubles of fluid replacement. These are the main circumstances of affecting Spirit. To cure Disease of Spirit(神志病), which is caused by Dam-eum, there are not only uses the treatment of 理痰氣, 豁痰開竅. There are two treatments to use together. The first treatment is 淸熱, 定驚, 息風, 淸心 that removes fitted toxin. And the other treatment is that keeps the balance of Internal Organs.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.2
• /
• pp.654-670
• /
• 2020

Workers at construction sites are easily exposed to many dangers and accidents involving falls, tripping, and missteps on stairs. However, researches on construction site monitoring system to prevent work-related injuries are still insufficient. The purpose of this study was to develop a wearable textile pressure insole sensor and examine its effectiveness in managing the real-time safety of construction workers. The sensor was designed based on the principles of parallel capacitance measurement using conductive textile and the monitoring system was developed by C# language. Three separate experiments were carried out for performance evaluation of the proposed sensor: (1) varying the distance between two capacitance plates to examine changes in capacitance charges, (2) repeatedly applying 1 N of pressure for 5,000 times to evaluate consistency, and (3) gradually increasing force by 1 N (from 1 N to 46 N) to test the linearity of the sensor value. Five subjects participated in our pilot test, which examined whether ascending and descending the stairs can be distinguished by our sensor and by weka assessment tool using k-NN algorithm. The 10-fold cross-validation method was used for analysis and the results of accuracy in identifying stair ascending and descending were 87.2% and 90.9%, respectively. By applying our sensor, the type of activity, weight-shifting patterns for balance control, and plantar pressure distribution for postural changes of the construction workers can be detected. The results of this study can be the basis for future sensor-based monitoring device development studies and fall prediction researches for construction workers.

• Physical Therapy Korea
• /
• v.27 no.2
• /
• pp.126-132
• /
• 2020

Background: Augmented somatosensory feedback stimulates the mechanoreceptor to deliver information on bodily position, improving the postural control. The various types of such feedback include ankle-foot orthoses (AFOs) and vibration. The optimal feedback to mitigate postural sway remains unclear, as does the effect of augmented somatosensory feedback on muscle co-contraction. Objects: We compared postural sway and ankle muscle co-contraction without feedback (control) and with either of two forms of somatosensory feedback (AFOs and vibration). Methods: We recruited 15 healthy subjects and tested them under three feedback conditions (control, AFOs, vibration) with two sensory conditions (eyes open, or eyes closed and the head tilted back), in random order. Postural sway was measured using a force platform; the mean sway area of the 95% confidence ellipse (AREA) and the mean velocity of the center-of-pressure displacement (VEL) were assessed. Co-contraction of the tibialis anterior and gastrocnemius muscles was measured using electromyography and converted into a co-contraction index (CI). Results: We found significant main effects of the three feedback states on postural sway (AREA, VEL) and the CI. The two sensory conditions exerted significant main effects on postural sway (AREA and VEL). AFOs reduced postural sway to a level significantly lower than that of the control (p = 0.014, p < 0.001) or that afforded by vibration (p = 0.024, p < 0.001). In terms of CI amelioration, the AFOs condition was significantly better than the control (p = 0.004). Vibration did not significantly improve either postural sway or the CI compared to the control condition. There was no significant interaction effect between the three feedback conditions and the two sensory conditions. Conclusion: Lower-extremity devices such as AFOs enhance somatosensory perception, improving postural control and decreasing the CI during static standing.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.4
• /
• pp.72-79
• /
• 1997

A study is a experiment which is figure out to optimum discharge cutting condition of the surface roughness, electronic discharging speed and electrode wear ration with Ton , Toff and V(voltage) as an input condition according to the current(Ip) in an electric spark machine : 1) Electrode is utilized Cu and Graphite. 2) Work piece is used the material of carbon steel. The condition of experiment is : 1) Current is varied 0.7(A) to 50(A) and the time of electric discharging to work piece in each time is 30(min) to 60(min). 2) After the upper side of work piece was measured in radius(5$\mu$m) of stylus analyzed the surface roughness to ade the table and graph of Rmax by yielding data. 3) Electro wear ratio is : \circled1Cooper was measured ex-machining and post-machining by the electronic balance. \circled2The ex-machining of graphite measured by it, the post-machining was found the data from volume $\times$specific gravity and analyzed to made its table and graph on ground the data. 4) In order to keep the accuracy of voltage affected to the work piece was equipped with the A.V. R and the memory scope was sticked to the electric spark machine. 5) In order to preserve the precision of current, to get rid of the noise occured by internal resistance of electric spark machine and to force injecting for the discharge fluid , it made the fixed table for a work piece to minimize the work error by means of one's failure during the electric discharging.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.4
• /
• pp.130-137
• /
• 1997

The demand for wire-cut EDM is increasing rapidly in the die and tool making industry. In this study machining characteristics such as machining rate, surface roughness, hand drum form and hardness of machined material are investigated experimentally under the conditions varing pulse on time, pulse off time, peak voltage, wire tension after fixing other conditions in SKD 11 and brass and brass workpiece. It was found that various operating conditions had significant influences on machining characteristics. But the hardness of workpiece was uneffected by operating conditions. Also it was obtained experimentally that brass workpeice had better machinability than SKD 11 one.dition according to the current(Ip) in an electric spark machine : 1) Electrode is utilized Cu and Graphite. 2) Work piece is used the material of carbon steel. The condition of experiment is : 1) Current is varied 0.7(A) to 50(A) and the time of electric discharging to work piece in each time is 30(min) to 60(min). 2) After the upper side of work piece was measured in radius(5$\mu$m) of stylus analyzed the surface roughness to ade the table and graph of Rmax by yielding data. 3) Electro wear ratio is : \circled1Cooper was measured ex-machining and post-machining by the electronic balance. \circled2The ex-machining of graphite measured by it, the post-machining was found the data from volume $\times$specific gravity and analyzed to made its table and graph on ground the data. 4) In order to keep the accuracy of voltage affected to the work piece was equipped with the A.V. R and the memory scope was sticked to the electric spark machine. 5) In order to preserve the precision of current, to get rid of the noise occured by internal resistance of electric spark machine and to force injecting for the discharge fluid , it made the fixed table for a work piece to minimize the work error by means of one's failure during the electric discharging.

• Korean Journal of Organic Agriculture
• /
• v.24 no.4
• /
• pp.869-879
• /
• 2016

The present study was conducted to evaluate the effects of dietary formulated feed additive on growth performance and carcass traits of Hanwoo steers. A formulated feed additive reported to reduce heat load in the rumen in our previous research was used (Cho et al., 2014). Total 32 herds of Hanwoo steers were assigned into two groups of control and treatment. Total mixed ration was provided as basal diet for cattle and 100 g of additive was supplemented on diet for treatment. Feeding trial was performed during 120 days before slaughter. For growth performance, 3 periods (0~90 days; 90~120 days; 0~120 days) were allotted and average daily gain, feed requirement and final body weight were determined. Loin meat between $12^{th}$ and $13^{th}$ rib was used for meat quality analysis after slaughtering. Only $1^{st}$ period showed significantly improved growth performance of treatment (P<0.05) and there were no significant difference in other periods. At $3^{rd}$ periods (overall), a trend of increased average daily gain was found at treatment (P=0.075). Carcass performance and quality did not show significant differences between treatment and control (P>0.05). In meat quality, treatment showed significant increment in all measured meat colors (P<0.05) and significantly less sharing force compared to the control (P<0.05). Although no significant difference in growth performance and carcass yield were found, remarkably improved economic status was detected in treatment group. In conclusion, it could be suggested that application of a formulated feed additive specialized in reduction of heat load in the rumen was able to increase economical balance through enhancing heat stress condition of ruminant and growth.

• Korea and Global Affairs
• /
• v.1 no.1
• /
• pp.97-114
• /
• 2017

This article aims for searching the clue of North Korea nuke-problem by understanding it contextually. We must see this from the beginning as many trials in settling the problem have failed. North Korea nuke-problem is related to the change of international implication as well as the domestic process of its development. At first, it started from the regime survival, which evolved with the effect of learning. During the Cold War, its development had combined the principle of 'self-defense' because of Sino-Russia conflict. Particularly, its meaning varied dramatically due to the collapse of Cold War system plus the advent of post-Cold War system. North Korea nuclear program has became a global problem based on the deterioration of North Korea's security milieu and Bush administration's policy. Therefore, the area of common solution for NK nuke-problem must be found in the context of regime survival and the change of its meaning by continual convergence effort.