• 제어로봇시스템학회논문지
• /
• 제17권6호
• /
• pp.513-520
• /
• 2011

This paper presents the motion planning of robotic vehicles for the path tracking and the obstacle avoidance. To follow the given path, the vehicle moves through the turning radius obtained through the pure pursuit method, which is a geometric path tracking method. In this paper, we assume that the vehicle is equipped with a 2D laser scanner, allowing it to avoid obstacles within its sensing range. The turning radius for avoiding the obstacle, which is inversely proportional to the virtual force, is then calculated. Therefore, these two kinds of the turning radius are used to generate the steering angle for the front wheel of the vehicle. And the vehicle reduces the velocity when it meets the obstacle or the large steering angle using the potentials of obstacle points and the steering angle. Thus the motion planning of the vehicle is done by planning the steering angle for the front wheels and the velocity. Finally, the performance of the proposed method is tested through simulation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.852-857
• /
• 2004

In this paper, an angular self-sensing algorithm is proposed and implemented to a Lorentz force type integrated motor-bearing system. It is based on the principle that the flux linkages of stator windings, calculated from the voltage and torque control current, are the functions of the rotor angle. The tracking angular position error is proven to vanish using the Lyapunov stability method, and the experimental results show that the initial error decays within about 5 seconds. It is found that the resolution of the algorithm remains about 1º over the speed range of 100 to 1000 rpm.

• 제어로봇시스템학회논문지
• /
• 제22권11호
• /
• pp.960-966
• /
• 2016

This paper proposes a new concept of a soft and wearable upper-limb exoskeleton. A novel actuation principle, called the twisted string actuation principle, is implemented to make it lightweight, soft, and therefore easily wearable. Its power transmission mechanism and harness are designed to be soft and wearable, yet have enough control accuracy for rehabilitation. In addition to force transmission optimization, a speed enlargement mechanism is newly introduced in order to increase the contraction speed of the twisted string actuation mechanism by sacrificing the unnecessarily large gear reduction ratio of the twisted string mechanism. A prototype has been tested for mirroring therapy, and the feasibility of the proposed mechanism has been shown through a sufficiently accurate tracking performance.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 추계학술대회 논문집(제1권)
• /
• pp.405-413
• /
• 2006

본 논문에서는 비선형 동적 마찰 성분을 효과적으로 보상하고 적응적으로 제어함으로써 차세대 항만 자동화 이송시스템으로 주목받고 있는 LMTT(linear motor-based transfer technology)의 위치 정밀도를 향상시키는 것을 목적으로 하고 있다. 셔틀카(shuttle car)와 컨테이너들의 다양한 중량과, 이로 인해 발생하는 동적 마찰 특성 파라미터들을 정확하게 추정할 수 있는 관측기를 설계하였다. 적응 backstepping 제어 기법을 적용하여 시스템이 안정하게 제어될 수 있도록 하는 제어기를 설계하였다. 시스템은 변화하는 환경에 대하여 높은 적응성을 가질 수 있어 여러 종류의 부하는 물론 마찰 특성의 변화에도 양호한 제어 특성을 유지할 수 있었다. 제안한 제어시스템의 타당성을 보여주기 위해 축소된 형태의 LMTT 시뮬레이터를 제작하여, 이에 대해 시뮬레이션과 실험만을 수행하여 제안하는 방법의 타당성과 실현성을 입증하고자 하였다.

• 한국항해항만학회지
• /
• 제31권1호
• /
• pp.55-64
• /
• 2007

일반적으로 서보 제어 시스템에서 비선형 동적 특성을 갖는 마찰력은 제어기 성능에 악영향을 미친다. 특히, 선형으로 고려된 시스템에 제어기 이득을 잘 설계한다 하더라도 마찰 현상에 포함된 동적으로 변화하는 dead zone에 의한 정상상태 오차 및 리미트 사이클(limit Cycle) 등을 야기한다. 따라서, 본 논문에서는 비선형 동적 마찰 성분을 효과적으로 보상하고 적응적으로 제어함으로써 차세대 항만 자동화 이송시스템으로 주목받고 있는 LMTT(linear motor-based transfer technology) 시스템의 위치 정밀도를 향상시키는 것을 목적으로 하고 있다. 본 제어대상은 셔틀카(shuttle car)와 컨테이너들의 다양한 중량과, 이로 인해 발생하는 동적 마찰 특성 파라미터들의 변화가 발생하므로 마찰력 내부 파라미터들의 추정이 요구된다. 제안하는 방법은 적응 backstepping 제어 기법으로 시스템이 안정하게 제어될 수 있는 조건으로 내부 파라미터 추정기를 설계하여 비선형 동적 마찰력을 보상하도록 하였다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.359-362
• /
• 2006

This study develops an automatic berthing control algorithm for ships with a bow thruster and a stern thruster as well as a rudder. A nonlinear mathematical model for low speed maneuvering of ships is used to develop a MIMO(multi-input multi-output) nonlinear control algorithm. The algorithm consists of two parts, which are forward velocity control and heading angle control. The control algorithm is designed based on the longitudinal and yaw dynamic models of ships. The desired heading angle is obtained by the so called "Line of Sight" method. An optimal control force allocation method of the rudder and the thrusters is suggested. The nonlinear control algorithms are tested by numerical simulations using MATLAB, and shows good tracking performances.

• 한국자동차공학회논문집
• /
• 제24권6호
• /
• pp.730-736
• /
• 2016

Recent research suggests the various applications of Model Predictive Control on vehicle systems. In numerous cases, nonlinear tire models such as the Magic Formula, which are highly complex and are more detailed than necessary, are used. This paper presents a nonlinear tire model that excludes the region of negative slope but expresses the nonlinear properties of tire well enough for tracking the lane of a racing course. The proposed inverse tire model can also be used to calculate the slip angle from the tire force. Thus, the model can be utilized to design the Model Predictive Controller.

• Transactions on Control, Automation and Systems Engineering
• /
• 제3권2호
• /
• pp.117-123
• /
• 2001

To improve control performance of a non-linear system, many other reserches have used the sliding model control algorithm. The sliding mode controller is known to be robust against nonlinear and unmodeled dynamic terms. However, this algorithm raises the inherent chattering caused by excessive switching inputs around the sliding surface. Therefore, in order to solve the chattering problem and improve control performance, this study has developed the sliding mode controller with a perturbation estimator using the observer-based fuzzy adaptive network. The perturbation estimator based on the fuzzy adaptive network generates the control input of compensating unmodeled dynamics terms and disturbance. And the weighting parameters of the fuzzy adaptive network are updated on-line by adaptive law in order to force the estimation errors converge to zero. Therefore, the combination of sliding mode control and fuzzy adaptive network gives rise to the robust and intelligent routine. For evaluation control performance of the proposed approach, tracking control simulation is carried is carried out for the hydraulic motion simulator which is a 6-degree of freedom parallel manipulator.

• Smart Structures and Systems
• /
• 제26권3호
• /
• pp.373-390
• /
• 2020

Hybrid simulation (HS) is a versatile tool for structural performance evaluation under dynamic loads. Although real structural responses are often multiple-directional owing to an eccentric mass/stiffness of the structure and/or excitations not along structural major axes, few HS in this field takes into account structural responses in multiple directions. Multi-directional loading is more challenging than uni-directional loading as there is a nonlinear transformation between actuator and specimen coordinate systems, increasing the difficulty of suppressing loading error. Moreover, redundant actuators may exist in multi-directional hybrid simulations of large-scale structures, which requires the loading strategy to contain ineffective loading of multiple actuators. To address these issues, lately a new strategy was conceived for accurate reproduction of desired displacements in bi-directional hybrid simulations (BHS), which is characterized in two features, i.e., iterative displacement command updating based on the Jacobian matrix considering nonlinear geometric relationships, and force-based control for compensating ineffective forces of redundant actuators. This paper performs performance validation and application of this new mixed loading strategy. In particular, virtual BHS considering linear and nonlinear specimen models, and the diversity of actuator properties were carried out. A validation test was implemented with a steel frame specimen. A real application of this strategy to BHS on a full-scale 2-story frame specimen was performed. Studies showed that this strategy exhibited excellent tracking performance for the measured displacements of the control point and remarkable compensation for ineffective forces of the redundant actuator. This strategy was demonstrated to be capable of accurately and effectively reproducing the desired displacements in large-scale BHS.

• Structural Engineering and Mechanics
• /
• 제30권6호
• /
• pp.679-698
• /
• 2008

On marine vessels, delicate instruments such as navigation radars are normally mounted on ship masts. However the vibrations at the top of mast where the radar is mounted often cause serious deterioration in radar-tracking resolution. The most serious problem is caused by the rotational vibrations at the top of mast that may be due to wind loading, inertial loading from ship rolling and base excitations induced by the running propeller. This paper presents a method of semi-active vibration control using magneto-rheological (MR) dampers to reduce the rotational vibration of the mast. In the study, the classical optimal control algorithm, the independent modal space control algorithm and the double input - single output fuzzy control algorithm are employed for the vibration control. As the phenomenological model of an MR damper is highly nonlinear, which is difficult to analyse, a back- propagation neural network is trained to emulate the inverse dynamic characteristics of the MR damper in the analysis. The trained neural network gives the required voltage for each MR damper based on the displacement, velocity and control force of the MR damper quickly. Numerical simulations show that the proposed control methods can effectively suppress the rotational vibrations at the top of mast.