• Journal of Power System Engineering
• /
• v.20 no.2
• /
• pp.43-50
• /
• 2016

This research proposal is based on a novel non-contact technique of micro-sized bead injection process for fabrication of electronic paper display. This non-contact injection process is based on the principle of electrostatic force and uses micro-sized metal-coated beads dispersed in a solution. The dispersion retention times of three different solutions with viscosities of 10 cps, 100 cps, and 1000 cps were measured by optical equipment showing the retention times of 5 mins, 10 mins, and 30 mins respectively. The dispersion retention rate dropped as the time passed. The dispersion retention characteristic of 1000 cps solution was more stable as compared to those of 10 cps and 100 cps meaning that higher viscosity has better retention properties. The experimental results of bead injection at different viscosity levels of the solution were also measured and a stable injection result was achieved by using 1000 cps solution. This results show that stable injection is dependent on solution viscosity and dispersion.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2265-2267
• /
• 2003

In this paper, the virtual reality system is tried to developed, which controls not only the sense of sight and hearing but also the sense of touch, In order to develope the sense of touch in this study, the stable tactual transaction system, based on summing up the basic algorithm and theory is embodied. Especially, the graphic deformation algorithm is developed in realtime with using the deformed FEM. To apply the FEM, a deformed material model is produced and then the graphic deformation with this model is able to force. Finally, the graphic transaction algorithm is deduced by the realtime calculation and simplification because the purpose of this system is to transact in real time. The result of this study is that the proposed system is possible to deform the graphics and transact the haptic in real time in PC. The simulation program has been made to prove this result.

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.4
• /
• pp.49-52
• /
• 2007

As the minimum feature size decrease, control of contamination by nanoparticles is getting more attention in semiconductor process. Cleaning technology which removes nanoparticles is essential to increase yield. A reference wafer on which particles with known size and number are deposited is needed to evaluate the cleaning process. We simulated particle trajectories in the chamber by using FLUENT. Charged monodisperse particles are generated using SMPS (Scanning Mobility Particle Sizer) and deposited on the wafer by electrostatic force. The Experimental results agreed with the simulation results well. We calculate the particles loss in pipe flow theoretically and compare with the experimental results.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.3
• /
• pp.144-149
• /
• 2019

This paper describes the results of a study on the unmanned maintenance robot that simultaneously performs the cleaning and inspection of the photovoltaic panels. The robot has a special adsorptive device, an infrared sensor, a vacuum level sensor and a camera. The robot uses two SSC (Sliding Suction Cup) adsorptive devices to move up and down the slope. First, the forces generated when the robot moves up the slope are mechanically analyzed, and the required design and control of the adsorption system are suggested. The robot was designed and manufactured to operate stably by using the presented results. Next, the normal force between the panel and the wheel was measured to confirm that the robot was manufactured and operated as intended, and the robot motion was tested on the inclined panel. It has been proven that robots are well designed and built to clean and inspect sloped panels.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.41 no.6
• /
• pp.1-10
• /
• 2004

A haptic rendering system is proposed for a puncture task of a virtual vertebra model. To build a mesh model from medical images, Delaunay triangulation is applied and physical models are based on elasticity theory. Also, a redundant actuated 6 DOF parallel type haptic device is designed to display large force and to resolve the singularity problem of parallel type mechanisms. Haptic feeling of puncture task and the performance of the proposed haptic device are tested by two puncture task experiments.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.2
• /
• pp.64-71
• /
• 2023

If an impedance mismatch occurs between the source and load in a Radio Frequency transmission system, reflected power is generated. This results in incomplete power transmission and the generation of Reflected Power, which returns to the Radio Frequency generator. To minimize this Reflected Power, Impedance matching is performed. Fast and efficient Impedance matching, along with converging reflected power towards zero, is advantageous for achieving desired plasma characteristics in semiconductor processes. This paper explores Impedance matching by adjusting the Vacuum Variable Capacitor of an L-type Matching Module based on the trends observed in the voltage of the Phase Sensor and Electromotive Force voltage. After assessing the impedance matching characteristics, the findings are described.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.6 no.3
• /
• pp.85-91
• /
• 2007

This study was carried out to minimize the lifting force of a two hinge type stand mechanism. This unit is designed for the display devices in order to enhance the ergonomics for effective height adjustment and maintenance at any preferred position. The unit will be very useful for the mechanism fabricated with a coil spring and disc springs as a torque generator. The maximum and the minimum torque value should be calculated initially for the smooth lift. And the reasonable torque distribution is necessary to prevent any auto lift and auto dropping at any position because the torque generated by coil spring is more sensitive than disc spring in tilting the position. Therefore, the analysis of the coil spring is requisite to issue the specific torque value depending on the distorted angle with securing reliability of a long time storage condition. After the theoretical torque value was calculated, the evaluation was carried out by making a proto-type sample, then distorted angle was updated by experiment. The result of this study can readily be applied to various units for the optimization of the smooth lift.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.882-885
• /
• 2003

In this paper, we describe a haptic jacket and wheel as a haptic interface to enhance VR game realism. Building upon the VR game system using this devices, our haptic interface technique allows the user to intuitive interact on game contents, and then to sense the game event properties such as walking, attacking, driving and fire in a natural way. In addition, we extended the initial haptic model to support haptic decoration and dynamic interactions due to the added game event in a real time display. An application example presented here is a VR Dino-Attack game. This game supports interactions among dynamic and our intuitive haptic interface. Modeling physic interactions involves precise collision detection, real-time force computation, and high control-loop bandwidth.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.05a
• /
• pp.55-58
• /
• 1996

A new type CuN/Cu/CuN thin film electrode material with high adhesion to glass was developed by the dc reactive planar magnetron sputtering system for the PDP(Plasma Display Panel). The adhesive force of the CuxN thin film was in the range of 20∼40(N) under the conditions of the N$_2$ partial pressure of 15%, discharge current of 70mA, discharge voltage of 450v and substrate bias voltage of -100V. The adhesive force was depended on the N$_2$ partial Pressure, discharge current and substrate bias voltage.

• The Journal of Korean Physical Therapy
• /
• v.15 no.2
• /
• pp.85-99
• /
• 2003

Muscle tone is the force with which a muscle resists being lengthened. Muscle tone is often tested clinically by passively extending and flexing a relaxed patient's limbs and feeling the resistance offered by the muscle. Both nonneural and neural mechanism contribute to muscle tone. Muscle tone is the mechanisms that contribute to the generation of tone in individual muscles when a person is in a relaxed state. This background level of activity changes in a certain antigravity posture muscle when we stand upright, thus counteracting the force of gravity. This increased level of activity in antigravity muscles is known as postural tone. The evidence from experiments showing that lesions of the dorsal(sensory) roots of the spinal cord reduced muscle(postural) tone is influenced by inputs from the somatosensory system. Patients with neurological damage have several state of muscle(postural) tone, which display from flaccidity to rigidity. This review article deal with muscle tone and somatosensory system acting on this. The understanding about this contribute to a better therapeutic approach for the rehabilitation of patients to have an abnormal muscle(postural) tone due to neurological damage.