• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.6
• /
• pp.763-773
• /
• 2010

The removal efficiencies and a total oxygen transfer coefficient for food waste leachate(FWL) were estimated by using Jet Loop Reactor(JLR). Pure oxygen was used instead of air to improve oxygen concentration in the JLR for high total chemical oxygen demamd(TCOD) in FWL. In JLB, in order to examining the oxygen transfer characteristic, the circulation flowrate and oxygen flowrate were controlled with 7~10 L/min(1.5 L/min interval) and 0.2~0.5 L/min (0.1 L/min interval) and we experimented according to the each condition. As a result, Oxygen uptake rate(OUR) and oxygen transfer rate could be maximized than the oxygen flowrate to increase the circulation flowrate. In addition, it determined that JLR using the pure oxygen which can obtain the greatest oxygen transfer rate as it was the high-concentration organic wastewater like the food waste leachate through the continuous experiment was appropriate.

• Journal of Environmental Science International
• /
• v.21 no.10
• /
• pp.1255-1263
• /
• 2012

Batch cultivations were performed to evaluate the influences of the initial pH condition on mesophilic and thermophilic acidogenic fermentation with food waste recycling wastewater. In both conditions of mesophilic and thermophilic fermentation, TVFAs production rates were maximized at the initial pH 7 condition as 0.15 and 0.23 g TVFAs/L hr, respectively. And pH was also maintained stably between 6 and 7 during 72hr acidogenic cultivation at both conditions. However, predominant VFA components were different according to reaction temperature conditions. In mesophilic condition, propionic acid which has low conversion efficiency to methane was accumulated up to 1,348 mg/L while acetic and butyric acid were predominant in thermophilic condition. Therefore, thermophilic acidogenic fermentation was superior for the effective VFAs production than mesophilic condition. From the DGGE analysis, the band patterns were different according to the initial pH conditions but the correlations of the each band were increased in similar pH conditions. These results mean that microbial communities were certainly affected by the initial pH condition. Consequently, the adjustment of the initial pH to neutral region and thermophilic operation are needed to enhance acidogenic fermentation of food waste recycling wastewater.

• New & Renewable Energy
• /
• v.18 no.2
• /
• pp.9-17
• /
• 2022

In this study, we used the Flux Balance Analysis (FBA) program to examine the behavior of hydrogen and organic acids according to seasonal changes in food wastewater collected from D city. The results showed that average hydrogen conversion rates in spring, summer, autumn, and winter were 1.06, 0.71, 1.21, and 1.13 mol H₂/mol of hexose_added, respectively, indicating a significantly lower hydrogen conversion rate in summer than in other seasons. This phenomenon is believed to occur because the carbohydrate concentration of the incoming food wastewater is low. In addition, Lactobacillus, the lactic acid-producing bacterium, was 21.3% in spring, 27.2% in summer, 17.5% in autumn, and 22.6% in winter. The most distinctive feature of the microbial community in summer was that 15.3% of the Ilyobacter was analyzed. It was confirmed that Ilyobacter, which is involved in the production of acetic acid and propionic acid, is closely associated with the tendency of increasing acetic acid and propionic acid and thus contributes to organic acid change. Clostridium, a hydrogen-producing bacterium, was 76.2%, 50.8%, 78.3%, and 74%, in spring, summer, autumn, and winter, respectively. It was confirmed that Clostridium dominates the microbial community by approximately 70% or more in all seasons except summer.

• Journal of Korean Society on Water Environment
• /
• v.27 no.4
• /
• pp.461-466
• /
• 2011

The feasibility of utilizing food waste leachate as an external carbon source was tested to enhance biological nutrient removal from an industrial wastewater with an average flow rate of $164,800m^3/d$ and a low carbon/nitrogen ratio of 2.8. A considerable improvement in the removal of nitrogen and phosphorus was observed when a certain amount of the leachate, ranging from 70 to $142m^3/d$, was supplemented to the biological industrial wastewater treatment process. The addition of the leachate led to an increase in the BOD/N ratio (4.5) and the removal efficiency of nutritents from 29.7% to 71.7% for nitrogen and from 34.8% to 65.6% for phosphorus. However, an excessive dose of the leachate that significantly exceeded $120m^3/d$ caused serious operational problems, like oil-layer formation in the grit chamber and scum layer in the primary clarifier. Thus, an supplement of food waste leachate at a dose acceptable to an existing facilities can be a practical and effective means to enhance the nutrient removal from industrial wastewater and to dispose of the food waste leachate.

• Korean Membrane Journal
• /
• v.2 no.1
• /
• pp.1-8
• /
• 2000

In Kimchi (a salt-pickled and fermented food) manufacturing industry, the process of brining and rinsing the raw vegetable produces a vast amount of wastewater of high salinity. Instead of expensive and low-efficient conventional treatment system, brining wastewater reuse system was developed using hybrid chemical precipitation/microfiltration. In the microfiltration of chemically treated brining wastewater, comparison of flux, backwashing frequency and energy consumption was made between dead-end and crossflow filtration mode. The optimum location of neutralization step in this system was also discussed in connection with the microfiltration performance. The quality test of Kimchi prepared by the reuse system confirmed the new approach was successful in terms of water/raw material(salt) saving and wastewater reduction.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1999.04b
• /
• pp.1-12
• /
• 1999

In Kimchi (a salt-pickled and fermented food) manufacturing industry, the process of brining and rinsing the raw vegetable produces a vast amount of wastewater of high salinity. Instead of expensive and low-efficient conventional treatment system, brining wastewater reuse system was developed using hybrid chemical precipitation / microfiltration. In the microfiltration of chemically treated brining wastewater, comparison of flux, backwashing frequency and energy consumption was made between dead-end and crossflow filtration mode. The optimum location of neutralization step in this system was also discussed in connection with the micro filtration performance. The quality test of Kimchi prepared by the reuse system conformed the new approach was successful in terms of water/raw material (salt) savings and wastewater reduction.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.14 no.4
• /
• pp.113-120
• /
• 2006

Wastewater generated through the food waste recycling process have known high concentration, BOD 20,000~150,000 mg/L, which has to treat to the proper level because of a ban on reclamation. But it is impossible to treat less than 10 days by existing water treatment plant. Ecodays Ltd. is to treat this wastewater during 2~4 days by ER-1, which can simultaneously induce the modified PFR(Plug Flow Reactor) of the oxygen transfer rate, MLVSS concentration, and influent concentration to top from bottom of reactor. We tested the pilot test about low concentration food wastewater(BOD 16,500 mg/L) and high concentration food wastewater(64,431 mg/L) at the food waste recycling plant of H-Gun(20t/d). Hydraulic retention time(HRT) of ER-1 for low concentration food wastewater is 2.5day. In low concentration conditions, ER-1 treatment efficiency is to appear BOD 99%, COD 98%, TN 97%, and TP 96%. While ER-1 process for high concentration food wastewater treatment is composed 2 stages, which are to be HRT 2.5day for law wastewater and HRT 1.5 day for secondary treatment. In high concentration conditions, ER-1 treatment efficiency is to appear BOD 97%, COD 84%, TN 66%, and TP 95%. It is treated without temperature control about high temperature($50^{\circ}C$) to appear low treatment efficiency in high concentration conditions.

• Applied Biological Chemistry
• /
• v.45 no.1
• /
• pp.25-29
• /
• 2002

The kernel of wastewater treatment by activated sludge is elimination of organic substances and maintenance of well-flocculated sludge sedimentation. By the conventional activated sludge treatment, the optimum F/M ratio of soybean wastewater treatment was 0.24 (kg-BOD/kg-MLVSS day) and sludge bulking was generated at 0.48 (kg-BOD/kg-MLVSS day). To improve the treatment capacity and operation quality in higher loading of soybean wastewater, influent pH was constantly controlled by 9.0 using NaOH as a coagulant agent. In this process, higher loading up to 2.88 (kg-BOD/kg-MLVSS day) was possible and SVI was maintained under 150 without bulking. This was equivalent to 7.2 times higher than maximum permissible load of the conventional activated sludge process.

• Journal of the Korean Chemical Society
• /
• v.58 no.2
• /
• pp.198-204
• /
• 2014

In this present study, bagasse based pulp and paper industry wastewater was treated under different operating conditions such as initial pH (6-8), temperature ($25-35^{\circ}C$) and contact time (3-7 days) by using Bacillus subtilis. Response surface methodology (RSM) coupled with Box-Behnken response surface design (BBD) was employed to investigate the effect of process variables on the responses such as turbidity, biological oxygen demand (BOD) and chemical oxygen demand (COD) removal. The experimental data were analyzed by Pareto analysis of variance (ANOVA) and the second order polynomial models were developed. Interactive effects of the process variables on the responses were studied using plotting 3D response surface contour graph and the optimum process conditions were found to be: initial pH of 7, temperature of $30^{\circ}C$ and contact time of 5 days. Under these conditions, removal efficiencies of turbidity, BOD and COD were found to be 85%, 93% and 80% respectively which are close agreement with real experiments. These results indicate that the treatment of bagasse based pulp and paper industry wastewater using Bacillus subtilis is an effective and novel technique.

• Environmental Engineering Research
• /
• v.17 no.2
• /
• pp.59-63
• /
• 2012

This paper proposes a modified Ludzack-Ettinger (MLE) type membrane bioreactor (MBR) as a method of treatment for wastewater from food waste disposer. Micro-membrane filtration allows for an extremely low concentration of suspended solids in the effluent. The effluent of the reactor in question is characterized by a relatively high level of non-biodegradable organics, containing a substantial amount of soluble microbial products and biomass. Results obtained in this paper by measurement of membrane fouling are consistent with biomass concentration in the reactor, as opposed to chemical oxygen demand (COD). The MLE process is shown to be effective for the treatment of wastewater with a high COD/N ratio of 20, resulting in are markedly high total nitrogen removal efficiency. Denitrification could be improved at a higher internal recycle ratio. Despite the low concentration of influent phosphorus, the phosphorus concentration of the outflow is seen to be relatively high. This is because outflow phosphorous concentration is related to COD consumption, and the process operates at along solids retention time.