• Journal of Korea Foresty Energy
• /
• v.20 no.2
• /
• pp.9-19
• /
• 2001

This study was carried out to investigate natural insectifuge materials from tree extractives in order to substitute for organic synthetic insecticides for food wrapping corrugated board. Tree samples were collected, extracted, fractionated with hexane, $CH_2Cl_2$, ethylacetate(EtOAc) and $H_2O$, and then freezed dried for further study. EtOAc or $H_2O$ fractions were chromatographed on a Sephadex LH-20 column for isolation and purification, and the isolated compounds were characterized by spectroscopic tools such as NMR and MS. Crude extractives of EtOAc and $H_2O$ fractions were added to the printing ink for corrugated board with the concentration of 2% or 3% based on the weight of the ink, then the prepared ink was printed on the corrugated board to be used for evasion test using larva of indian meal moth(Plodia interpunctella(Hubner)). Robtin, dihydrorobinetin and leucorobinetinidin were isolated from the wood extractives of black locust(Robinia pseudoacacia) and the bark of poplar(Populus alba $\times$ glandulosa) contained many kinds of compounds such as (+)-catechin, naringenin, aromadendrin, eriodictyol, sakuranetin and its glycoside, taxifolin, neosaturanin, salireposide, p-coumaric acid and aesculin. Much of (+)-catechin was isolated from the bark extractives of willow(Salix koreensis) in addition to (+)-gallocatechin and p-coumaric acid and the bark of weeping willow(Salix babylonica) also contained (+)-catechin, (+)-gallocatechin, dihydromyricetin and myricetin.

• Journal of the Korean Institute of Gas
• /
• v.11 no.1 s.34
• /
• pp.29-33
• /
• 2007

This study investigates the use of $TiO_{2},\;Pd,\;Pt$, and In which greatly improves a sensitivity to trimethylamine gas. The metal-$SnO_{2}$ thick films were prepared by screen-printing method onto $Al_{2}O_{3}$ substrates with platinum electrode. The sensing characteristics were investigated by measuring the electrical resistance of each sensor in a test box as a function of detecting gas concentration. This was then used to detect trimethylamine, dimethylamine, and ammonia vapours within the concentration range of 100-1000ppm. The gas sensing properties of metal-$SnO_{2}$ mixed thick films depended on the content and variety of metal. It was found that sensitivity and selectivity of the films dopped with 1 wt% Pd and 10 wt% $TiO_{2}$ for trimethylamin gas showed the best result at $250^{\circ}C$.

• The Journal of the Korea Contents Association
• /
• v.17 no.7
• /
• pp.67-78
• /
• 2017

This study aims to analyze the status for the improvement of rehabilitation facilities of the products manufactured by severely disabled. So, This study analyze rehabilitation facilities of 289. The results of this study were as follows. First, sheltered workshop rate is 57.1%, Welfare group of disabled is 29.8%, Work program is 13.1%. And Total worker is 8,358 people(average 28.92 people), worker with disabled is 6,119 people(average 21.17 people). Second, Most of the certificated item is printing/advertising(18.6%) and food(14.3%), office/stationary(12.8%) and so on. Third, Total sales is 17.8 million won and sale cost is 15.7 million won and net income is 2.1 million won. Also, The longer the certificated period, the higher the sales. Forth, It is supported to purchasing improve sales, improve employment of the disabled, improve wage of the disabled, improve working condition. Fifth, it is necessary to successful of extension of priority purchasing ratio, additional purchasing point, support system of market. Base on this results, the implications for improvement on rehabilitation facilities wer discussed.

• Journal of Sensor Science and Technology
• /
• v.11 no.1
• /
• pp.18-27
• /
• 2002

$LaFeO_3$-based thick films with 2wt.%, 5wt.% and 10wt.% $Al_2O_3$ additives were fabricated by screen printing method on $Al_2O_3$ substrates. Structural, electrical and ammonia gas sensing characteristics of the thick films with different heat treatment temperatures were examined. From XRD results, the compound of $LaFeO_3$ and $Al_2O_3$ was not found until the heat treatment at $1200^{\circ}C$. SEM microphotograph showed similar grain growth despite the amount of $Al_2O_3$ additives with the heat treatment. Thick films with high activation energy and low resistance in the electrical properties showed high sensitivity for gases. Thick films with 2wt % $Al_2O_3$ additives heat-treated at $1200^{\circ}C$ showed the sensitivities of 210% for 100 ppm $NH_3$ gas at the working temperature of $350^{\circ}C$. The thick films showed food selectivity to $NH_3$ gas.

• Polymer(Korea)
• /
• v.38 no.6
• /
• pp.815-819
• /
• 2014

Scaffolds of tissue engineering should be biocompatible and biodegradable for cell attachment, proliferation and differentiation. In the various scaffold fabrication, 3D printing technique can make the three dimensional scaffold with interconnected pores for cell ingrowth. Polycaprolactone (PCL) is biodegradable polyester with a low melting temperature and has been approved by the Food and Drug Administration (FDA). In this study, PCL scaffold was fabricated by 3D bioprinting system and surface modification of PCL scaffold was controlled by NaOH treatment. Morphological change and wetability of NaOH-treated scaffold were observed by SEM and contact angle measurement system. The remnant of PCL treated with NaOH was measured by ATR-FTIR. In vitro study of scaffolds was evaluated with WST-1 and ALP activity assay. NaOH treatment of PCL scaffolds increased surface roughness, hydrophilicity, cell proliferation and osteogenic differentiation. These results indicate that NaOH-treated PCL scaffold made by 3D bioprinting has tissue engineered potential for the development of biocompatible material.

• Journal of vocational education research
• /
• v.36 no.1
• /
• pp.47-75
• /
• 2017

The purpose of this study was to provide basic data for policy making for secondary vocational education in each region and transformation in vocational high schools. To achieve this, the regional strategic industries in Daejeon and Jeonnam were selected, new demand for vocational high school graduates was forecasted in each industry and occupation. The results of the study are as follows. First, locational quotient analysis and regional shift-share analysis revealed that Daejon and Jeonnam have different strategic industries. Daejon, unlike Jeonnam strategically develops 'manufacturing food, beverage and tobacco', 'manufacturing timber and paper, printing and copying', 'public service and administration of national defense and social security' and 'manufacturing electrical devices, electronics and precision devices'. Jeonnam has specialized industries distinguished from Daejon's, which are 'manufacturing of machinery transportation equipments and etc', 'manufacturing of non-metallic minerals and metal products', 'electric, gas, steam and water supply systems/industries', 'manufacturing coal and chemical products, refining petroleum', 'mining' and 'agriculture, forestry and fishery'. Second, new demand for vocational high school graduates by occupations and industries showed regional differences(in Daejon and Jeonnam). According the forecast, Daejon will have many workforce demands based on manufacturing industries, on the other hand Jeonnam's focused on service industries. Analysis by occupations was also different, Daejon showed high demands on professional and related workers, while Jeonnam requested many new office and service workers. Third, new workforce demand by occupations in regional strategic industries is big part of overall new workforce demand both in Daejon and Jeonnam. Forth, according to the results of analyzing the new demand for vocational high school graduates in Daejeon and Jeonnam in terms of industry location quotient and change effect, there was high demand in industries with positive total change effects. In terms of location quotient, Daejeon and Jeonnam showed different results.