• 펄프종이기술
• /
• 제44권4호
• /
• pp.51-61
• /
• 2012

The new alkali pulping process combined with electron beam treatment was applied to utilize hemp bast tissues as a new valuable fibrous resource. Hemp bast tissues have some chemical properties with high lignin contents and holocellulose not to be defiberized by alkali pulping only, compared with the bast tissue of paper mulberry. To make up for the weakness of traditional alkali pulping process, electron beams were directly irradiated into the swelled bast tissue of hemp in NaOH solution and distilled water, and then facilitated the defiberization of hemp bast tissues. The papermaking from hemp bast fibers manufactured by the combination pulping process showed good apparent density, formation structure and air permeability, and had some mechanical properties with lower tensile, tear, burst strength and folding endurance. It is finally concluded that the combination pulping process with electron beam treatment could be suggested a new alternative for non-woody fibers.

• 펄프종이기술
• /
• 제41권3호
• /
• pp.66-70
• /
• 2009

Paper cultural heritages usually experienced the chemical and the physical deterioration because of various factors including preservation environment and the property of their materials. General restoration technology for paper cultural heritages is the lining. The application of the lining paper and the lining technology has varied depending on researcher's experiences. Therefore, each lining material and technology must be evaluated to develop a standard guide for preservation and restoration of paper cultural heritages. To date, various analysis techniques using lining paper, in terms of their materials, have been applied to analyses of causes and condition of damages, but it is difficult to develop a standard restoration treatment method of paper cultural heritages because it varies by their material. The Hanf, is made frrr the mulberry, is generally used for the lining in Korea.edt is required that the cr, in terms properties and general properties of Hanf, is used for lining papers, are evaluated to develop a standard guide for their restoration.ed this study, the general properties of several lining papers(Hanf), especially dimensave bility, were evaluated as part of the standardization of lining papers. The result have varied depending on the pulping chemical and the manufacturers. the basis weight, thickness and tensale strength of lining papers is bigger the paper treated by natural ash than the paper treated by sodium carbonate.ed case of formation, folding endurance, and dimensave bility, the paper treated by sodium carbonate showed better properties than those of the paper treated by natural ash.

• Journal of the Korean Wood Science and Technology
• /
• 제30권2호
• /
• pp.134-143
• /
• 2002

본 시험은 외발뜨기 한지와 쌍발뜨기 한지의 물리적 특성과 도침이 지질에 어떠한 영향을 미치고 있는지를 구명하고자 검증된 토착한지와 오늘날 전통식으로 제조한 한지, 그리고 개량 한지를 대상으로 했다. 외발뜨기 한지는 치우치지 않는 강도적 특성 때문에 실제 사용할 때, 강하고 질기며 잘 해어지지 않는 종이임을 알 수 있었다. 이처럼 질기다고 느껴지는 것은 좋은 원료와 토착식 제법으로 여러 장 겹쳐서 절대적인 강도를 향상 시켰기 때문이었다. 그러나 상대적 강도인 지수비교에서는 기타 한지와 큰 차이가 없었다. 도침은 내절도를 두드러지게 향상시키며 열단장과 파열지수를 높이는 역할을 했다. 특히 열단장(인장강도)의 향상을 가져왔다. 섬유 배향성을 고려하지 않고 초지한 외발뜨기 한지를 쌍발뜨기 한지와 비교해 보면 가로·세로의 강도 차이가 약간 적다는 것 외에 특별히 뛰어난 점이 없다는 것을 알 수 있었다.

• Journal of Forest and Environmental Science
• /
• 제26권2호
• /
• pp.83-94
• /
• 2010

Chinese fir (Latin name: Cunninghaimia lanceolata) is one of the major commercial coniferous trees. Most of Chinese fir forests are managed in successive rotation sites, which lead productivity to decline. Autotoxicity is the important reason for soil degradation of Chinese fir plantation, especially, phenolic acids are considered as the major allelopathic toxins which induce autotoxicity in Chinese fir rotation stands. We performed here proteomic approach to investigate the response of proteins in Chinese fir leaves to salicylic acid. The tube plantlets of Chinese fir clone were treated with 120 mg/L salicylic acid for 1, 3 and 5th day. 2-DE, coupled with MALDI-TOF-TOF/MS, was used to separate and identify the responsive proteins. We found 12, 7, and 12 candidate protein spots that were up- or down-regulated by at least 2.5 fold after 1, 3, and 5th day of the stress, respectively. Of these protein spots, 16 spots were identified successfully. According to the putative physiological functions, these proteins were categorized into five classes (1) the proteins involved in protein stability and folding, including 26S proteome, Grp78, Hsp70, Hsp90 and PPIase; (2) the protein involved in photosynthesis and respiration, including OEC 33 kDa subunit, GAPDH; (3) the protein related to cell endurance to acid, F-ATPase; (4) the protein related to cytoskeleton, tubulin; (5) the protein related to protein translation: prolyl-tRNA synthetase. These results give new insights into autotoxic substance stress response in Chinese fir leaves and provide preliminary footprints for further studies on the molecular signal mechanisms induced by the stress.

• Journal of the Korean Wood Science and Technology
• /
• 제27권1호
• /
• pp.88-104
• /
• 1999

본 시험은 외발 뜨기 한지와 쌍발 뜨기 한지를 구분하고 각각의 물성 차이 중 특히 4가지 강도에 대해 상대적 우위와 가로 세로 강도의 차이를 파악했다. 그 결과, 섬유 배향성을 특별히 고려하지 않은 외발 뜨기는 쌍발 뜨기와 비교해 가로, 세로 강도 차이가 다소 적다는 것 외에 특별히 뛰어난 점이 없다는 것을 알 수 있었다. 외발 뜨기 한지가 질기다고 느껴지는 것은 좋은 원료와 토착식 제법으로 여러 장(2~8장) 겹쳐서 절대적인 강도를 향상시켰기 때문이며 상대적인 강도인 지수비교에서는 큰 차이가 없었다. 또한 부가적으로 도침의 효과를 파악할 수 있었다. 도침은 내절도를 두드러지게 향상시켰으며 인열지수(인열강도)를 뺀 열단장과 파열지수(파열강도)를 높이는 역학을 했다. 특히 열단장(인장강도)의 향상을 가져왔다. 그리고 토착식 제법의 외발 뜨기는 여러 겹을 겹칠수록 인열지수가 증가(다른 강도에 비교해 상대적인 증가임)하는 경향을 보였다. 그러므로 도침과 토착식 한지는 서로 부족한 강도를 훌륭히 보완하는 역할을 했음을 알 수 있었다. 따라서 섬유 배향성을 고려하여 초지하고 도침을 실시해야 외발 뜨기 고유의 강도적 특징을 살릴 수가 있음을 알 수 있었다. 그리고 오늘날에 토착 외발 뜨기 방식으로 제조된 전통 한지들은 전체적인 강도면에서 토착 한지류와 비슷했으며 2겹지의 경우엔 가로 세로 강도차이도 토착한지 수준이었다. 그러나 강도들간의 우열 특성에서는 인열강도가 특히 낮았던 쌍발 뜨기 한지와 전체적으로 고른 강도를 보인 토착 외발 뜨기 한지의 중간에 위치하여 개선의 여지를 찾을 수 있었다.

• 한국포장학회지
• /
• 제26권1호
• /
• pp.33-39
• /
• 2020

본 연구에서는 닥섬유 함량에 따른 한지의 핸드드립용 커피필터로서의 적용가능성을 평가하기 위해 한지를 제조하고 실험을 실시하였다. 백색도 측정결과 목재펄프에 따른 기존 필터지와 한지간에 차이가 있었으며, 닥섬유 함량이 증가할수록 백색도가 감소하는 경향을 보였다. 닥섬유 함량이 증가할수록 닥섬유 내 장섬유에 의한 표면의 불균일성이 높아졌으며, 두께 값은 증가하고, 밀도는 감소하였다. 또한 닥섬유 함량이 증가할수록 인장강도와 습인장강도, 파열강도와 내절도는 모두 증가하였다. 특히 닥섬유 함량이 30%(w/w) 이상인 한지의 경우 기존 필터지보다 우수한 강도 값을 보여주었다. 화상분석장치를 이용한 한지필터 표면분석을 통하여 장섬유와 단섬유가 적절히 분포되어 공극을 메운 것을 확인할 수 있었다. 모든 한지필터는 식품용 기구 및 용기·포장재로서 적합 판정을 받았다. 닥섬유의 함량이 10%(w/w)인 한지 필터의 경우 기존 필터지보다 강도 값이 상대적으로 낮은 것으로 나타내어 커피 추출량 비교에서는 제외되었다. 동일한 드리퍼를 이용하여 같은 방법으로 추출한 커피의 추출수율은 유의적으로 차이가 없음을 확인하였다. 본 연구를 통해 닥섬유 함유량이 30%(w/w) 이상인 한지를 이용하여 커피를 추출했을 때, 시판 필터지와 유사한 강도와 추출속도를 가지는 것을 확인하였다. 추가적으로 한지필터를 이용하여 추출한 커피의 향미 평가를 통하여 닥섬유가 커피필터에 미치는 영향에 대한 연구가 필요할 것으로 보인다.

• 보존과학회지
• /
• 제25권2호
• /
• pp.161-169
• /
• 2009

본 연구에서는 한국산 시판 4종 한지의 강제적 열화 조건인 습 건열처리를 통하여 한지의 광학적 물리적 특성의 변화를 측정, 비교 검토하여 봄으로써, 현재 시판 한지의 안정성을 규명하고자 하였다. 인공 열화 전후의 비교에서 광학적 물리적 성질은 습열처리보다 건열처리의 경우에서 더욱 감소폭이 컸는데, 백색도, whiteness는 흑피로 제조된 순지에서 가장 크게 감소하였고 불투명도 역시 전체적으로 상승하는 경향 속에 흑피에서 가장 높게 상승하였다. 열단장은 백피의 경우가 최종적으로 가장 높은 강도를 나타냈으며, 인열강도는 흑피에서 급속히 감소하였다. 파열강도는 습열처리의 경우, 열화 후반부에서는 백피와 흑피의 값이 거의 비슷하였으나 내절도는 백피의 경우가 다른 펄프보다 월등히 높아 단순비교는 어려웠지만 열화처리에도 비교적 높은 내절도를 나타내었다. 따라서 흑피가 백피에 비해 열화에 약하다는 것을 알 수 있었다. 또한 이외 다른 펄프를 혼합한 경우는 강도면에서 크게 감소함을 알 수 있었다. 결론적으로 한지는 습도에 비해 온도에 더 민감한 것으로 나타났다. 그러나 가장 높은 관심을 가졌던 묵즙에 대한 농도 및 색상의 열화는 특별한 경향을 발견하지 못하였다.

• 펄프종이기술
• /
• 제39권1호
• /
• pp.38-47
• /
• 2007

This study was carried out to develop a new application field and obtain the basic data of citrus peel as waste in Jeju island and traditional Hanji for producing functional Hanji. The results measuring physical and optical properties, water vapor permeance and antibacterial activity are as follows. It was revealed that apparent density go as down but bulk raise up in the structural view of Hanji with increasing of the addition various Korean citrus peel (citrus unshiu, cheonggyun and hanrabong peel, and citrus unshiu peel powder) percentages, and that the density of Hanji added citrus unshiu peel was higher, but bulk was lower in compared with Hanji added other kinds of peel. Those Hanji added citrus unshiu peel, cheonggyun peel, hanrabong peel and citrus unshiu powder were very great not only in the strength (breaking length, burst index, tear index and folding endurance) but also in water vapor permeant rate in comparison with Hanji. The pHs of Hanji were neutrality (7 to 8). The brightness of the Hanji added various citrus peel percentages was low in compared to Hanji, and the 40% addition of hanrabong peel was the lowest. When 40% hanrabong peel was added to Hanji, it was very yellow in the color degree. When cheonggyun peel was added to Hanji manufacture, water vapor permeant rate was highly effective. It is known that vacant space of intrafiber was reduced by image analysis of Hanji and the additions of peel of citrus unshiu, cheonggyun and hanrabong were distributed equally in the interior of Hanji. The antibacterial activity of Hanji added citrus unshiu peel is more than 98%. After all, it would be able to increase utilization of Hanji, extensively. Namely, production of high quality Hanji added functional materials is expected for new valuable industry of citrus peel and Hanji.

• 펄프종이기술
• /
• 제42권5호
• /
• pp.37-46
• /
• 2010

This study was carried out to develop new application field and obtain the basic data of mixed paper with wood pulp and chitosan fiber for producing functional paper. Two types of wood pulp, such as SwBKP and HwBKP, were mixed with chitosan fiber. Physical and optical properties, water vapor absorption, air permeability, antibacterial activity and ash were measured. And the surface morphology of manufactured paper was observed using SEM. The results are as follows. It was revealed that density, breaking length, burst index, tear index, folding endurance and brightness were reduced but water vapor absorption and air permeability were on the rise in the structural view of SwBKP according to increasing the chitosan fiber ratio. Those HwBKP added chitosan fiber were great not only in the strength but also water vapor absorption and air permeability except for brightness. The water vapor absorption was lower and the air permeability was higher in the HwBKP added various chitosan fiber ratios than those with no chitosan fiber. It is estimated that these properties were related with various mixed rate of chitosan fiber. Particularly, air permeability was strongly dependent on the mixed rate of chitosan fiber. The chitosan fiber has superior antibacterial property, comparing with wood fiber. Adding chitosan fiber to the wood pulp was found to have an excellent antibacterial activity, more than 90%. The ashes were determined within 0.5%. Special bonds between chitosan fiber and wood pulp was observed by SEM and it means that the chitosan fiber were combined equally in the interior of wood pulp. In conclusion, mixing wood pulp with chitosan fiber can not only improves the quality of paper but also extend the usage of paper as a functional paper by using inherent property of chitosan. After all, production of functional paper added chitosan fiber is expected for new valuable industry of paper.