• The Journal of the Acoustical Society of Korea
• /
• v.20 no.2
• /
• pp.52-57
• /
• 2001

The passive ranging estimation techniques using a focused beamformer have been studied under the water. It is well known that the passive ranging estimation method using a focused beamformer is excellently evaluated. Among these, the passive ranging sonar is known to have a good performance under low signal-to-noise. ratio. However, its performance is degraded in multi-source environments. In this paper, we proposed the technique using dual focused beamformers to estimate the range. And when the sampling frequency is low, it is very difficult to steer the focused beam to the desired direction, as a result of this, the low performance occurs because of a distorted beam pattern. In this paper, we study the effect of sampling rate on passive ranging by using focused beamformer. And we verified the performance of the proposed method via computer simulation.

• Proceedings of the Safety Management and Science Conference
• /
• 2004.05a
• /
• pp.145-151
• /
• 2004

Reliability assurance problem is an important issue in advanced company with good R&D capacity. In Korea, long-term and large-scale project for reliability improvement and certification have been conducted from 2000, 4 years ago. Generally, assurance is composed of system assurance and lot assurance. For reliability lot assurance. it is prerequisite to development reliability sampling plan with time-saving and minimum cost. In this paper, we aim to investigate previous study on reliability lot assurance focused on reliability sampling plans and propose some suggestions for the future study.

• Journal of Soil and Groundwater Environment
• /
• v.25 no.2_spc
• /
• pp.28-54
• /
• 2020

Even though a systematic sampling approach is very crucial in both the general and detailed investigation phases to produce the best conceptual site model for contaminated sites, the concept is not yet established in South Korea. The U.S. Environmental Protection Agency (EPA) issued the 'Strategic Sampling Approaches Technical guide' in 2018 to help environmental professionals choose which sampling approaches may be needed and most effective for given site conditions. The EPA guide broadly defines strategic sampling as the application of focused data collection across targeted areas of the conceptual site model (CSM) to provide the appropriate amount and type of information needed for decision-making. These strategic sampling approaches can prevent the essential data from missing, minimize the uncertainty of projects and secure the data which are necessary for the important site-decisions. Furthermore, these provide collaborative data sets through the life cycle phases of projects, which can generate more positive proofs on the site-decisions. The strategic sampling approaches can be divided by site conditions. This technical guide categorized it into eight conditions; High-resolution site characterization in unconsolidated environments, High-resolution site characterization in fractured sedimentary rock environments, Incremental sampling, Contaminant source definition, Passive groundwater sampling, Passive sampling for surface water and sediment, Groundwater to surface water interaction, and Vapor intrusion. This commentary paper introduces specific sampling methods based on site conditions when the strategic sampling approaches are applied.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.4
• /
• pp.372-381
• /
• 2013

In the construction industry, a great deal of research has been focused on productivity improvement because a minor change in labor productivity can often make the difference between a profit and a loss. This study shows how productivity measurement methods can be applied in practice, step by step, to analyze and identify potential problems both in productivity and methods performance for masonry work. A work sampling technique was conducted to determine the nature and extent of an observable activity as an aid to measuring overall performance. Also, a method productivity delay model was used to identify non-productivity in individual cycle times. From the work sampling technique, it was found that the masonry crew had a Labor Utilization Factor of 47.1%, and from the videotape analysis, it was found that the material and dumpster location need to be adjusted to reduce the travelling distance. We have found that efforts to improve the productivity of masonry work should be focused almost exclusively on machine and labor delays, based on the result from the method productivity delay model.

• Journal of Construction Engineering and Project Management
• /
• v.5 no.1
• /
• pp.40-46
• /
• 2015

This study presents the results of our analysis and recommendations for process and productivity improvements. The project studied consists of a 5-story research building, with a structure of steel frames supporting concrete slabs. The observations focused on the analysis of the overall erection and framing process. The methods used for the analysis consisted in intensive visits on site, where construction processes were observed in term of resources, activities, durations, materials' handling procedures, and technology used. Back to the office, authors used the information captured to model the different trades' activities, using work sampling and 5-minute rating technique. The work sampling provides insight into the activity, hence allowing for process improvements. The productivity of various trades is strongly dependent on the organization of the work process and work site conditions. Improving the productivity of the entire project or company is not possible until everyone is committed to improvement.

• Journal of Korean Society for Atmospheric Environment
• /
• v.18 no.5
• /
• pp.355-362
• /
• 2002

There has been relatively a few studies that focused on evaluation of uncertainty for standard methods by which criteria pollutants are analyzed in ambient air. Especially, uncertainty evaluation has not been made yet for sampling and analysis of airborne NO$_2$. Ambient NO$_2$ has been thought to be a major criteria pollutant worldwide because of the potential of ozone formation as well as of its own toxicity. In this study, we tried to assess uncertainties associated with the every step of sampling and of analytical procedure of Griess-Saltzman method. Quality assurance (QA) and quality control (QC) were also emphasized with the uncertainty characterization. The use of Griess-Saltzman method for ambient NO$_2$ analysis showed very uniform daily concentration distribution with the mean of 10.8 ppb and the standard deviation of 1.08ppb during the sampling period. However, seven daily samples collected at the same sampling time and place exhibited highly different concentration distribution. Therefore, we evaluated uncertainties associated with sampling and analysis through the precise application of ISO Guide. Estimates of expanded uncertainties for a total of 62 samples fell in a relatively broad range of 5.17% to 11.85%. On the other hand. the expanded uncertainties were smaller for the high concentration range of greater than 15ppb.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.4
• /
• pp.1317-1325
• /
• 2014

The study focused on analyzing spatial sampling by minimizing autocorrelation of spatial based on spatial and geographical data. The study concluded two different ways of minimizing autocorrelation. First, it was important to use suitable spatial sampling method to alienate spatial autocorrelation from spatial or geographical data. The shear distribution rate of public transportation in Seoul resulted in high rate of autocorrelation. However, the study showed samples eliminated autocorrelation when samples were extracted with reasonable distance(above 400m) apart. Without spatial sampling the distortion of spatial data leads to false results; therefore, spatial sampling is indispensable. Second, factors which fluctuates shear distribution of public transportation spatial sampling changed before and after spatial sampling. This was caused by incapable of controling inherent spatial autocorrelation of the data.

• Journal of Korean Society of Forest Science
• /
• v.109 no.3
• /
• pp.291-299
• /
• 2020

The purpose of this study was to propose the most cost-effective sampling method, by analyzing the cost of forest resource investigation per sampling method for the planned harvesting area of in Chunyang-myeon, Byeonghwa-gun, Gyeongsangbuk-do, Korea. For this study, three sampling methods were selected: random sampling method, systematic sampling method, and line transect method. For each method, sample size, hourly wage, number of sample points, survey time, travel time, the sample error rate of the estimated average volume, and the desired sampling error rate were used to calculate the cost of forest resource inventories. Thus, 10 sampling points were extracted for each sampling method, and the factors required for cost analysis were calculated via a field survey. As a result, the field survey cost per ha using the random sampling method was found to be have the lowest cost, regardless of the desired sampling error rate, followed by the systematic sampling method, and the line transect method.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.6
• /
• pp.34-51
• /
• 2008

Today, the Internet is a part of our life. For that reason, we regard revealing characteristics of Internet traffic as an important research theme. However, Internet traffic cannot be easily manipulated because it usually occupy huge capacity. This problem is a serious obstacle to analyze Internet traffic. Many researchers use various sampling techniques to reduce capacity of Internet traffic. In this paper, we compare several famous sampling techniques, and propose efficient sampling scheme. We chose some sampling techniques such as Systematic Sampling, Simple Random Sampling and Stratified Sampling with some sampling intensities such as 1/10, 1/100 and 1/1000. Our observation focused on Traffic Volume, Entropy Analysis and Packet Size Analysis. Both the simple random sampling and the count-based systematic sampling is proper to general case. On the other hand, time-based systematic sampling exhibits relatively bad results. The stratified sampling on Transport Layer Protocols, e.g.. TCP, UDP and so on, shows superior results. Our analysis results suggest that efficient sampling techniques satisfactorily maintain variation of traffic stream according to time change. The entropy analysis endures various sampling techniques well and fits detecting anomalous traffic. We found that a traffic volume diminishment caused by bottleneck could induce wrong results on the entropy analysis. We discovered that Packet Size Distribution perfectly tolerate any packet sampling techniques and intensities.

• Journal of Korean Academy of Nursing
• /
• v.33 no.5
• /
• pp.538-543
• /
• 2003

Purpose: The purpose of this study was to identify the stress and the coping methodes in the cancer patients and their caregivers. Method: The stress method was measured by V AS(Visual Analogue Scale). The coping methodes was measured using the modified Ways of Coping Questionnaire. The phases of patient illness consisted of Ist(initial) stage, and 2nd(recurred) stage and 3rd(terminal) stage based on Lewandowski & Jones(1988) method. The data were collected by a survey of convenience sampling of 257 cancer patients and 196 of their caregivers from two hospitals in Seoul. The data were analyzed using paired t-test, unpaired t-test. Result: The stress level of cancer patients was lower than their caregivers. The cancer patients used emotion-focused coping mode than problem-focused coping mode. The caregivers problem-focused coping mode over emotion-focused coping mode. In the problem-focused coping mode, the caregivers significantly used two coping strategies that were ‘positve cope’, ‘information seeking’ more than patients. In emotion-focused coping mode, the caregivers significantly used one coping strategies that was ‘wish’ more than patients. The patients tended to used two coping strategies that were ‘blame’ and ‘emotion expression’ more than the caregivers. Conclusion: Further study needs to be done to positively identify these coping methods and develop interventions to assist patients and their caregivers.