• Journal of Korean Society of Water and Wastewater
• /
• v.11 no.1
• /
• pp.21-32
• /
• 1997

Optimum design of water distribution network(WDN) in many times means just reducing redundancy. Given only a few situations are taken into consideration for such design, WDN deprived of inherited redundancy may not work properly in some unconsidered cases. Quantifying redundancy and incorporating it into the optimal design process will be a way of overcoming just reduction of redundancy. Expected shortage is developed as a reliability surrogate in WDN. It is an indicator of the frequency, duration and severity of failure. Using this surrogate, Expected Shortage Optimization Model (ESOM) is developed. ESOM is tested with an example network and results are analyzed and compared with those from other reliability models. The analysis results indicate that expected shortage is a quantitative surrogate measure, especially, good in comparing different designs and obtaining tradeoff between cost and. reliability. In addition, compared other models, ESOM is also proved useful in optimizing WDN with reliability and powerful in controlling reliability directly in the optimization process, even if computational burden is high. Future studies are suggested which focus on how to increase applicability and flexibility of ESOM.

• Structural Engineering and Mechanics
• /
• v.56 no.4
• /
• pp.695-705
• /
• 2015

Distressed structures require necessary remedial measures in order to restore their original structural properties like strength and stiffness. Validating the effectiveness of the proposed qualitative remedial measure experimentally is of utmost importance as there is no well-established analytical method to verify the effectiveness of the same quantitatively. Prototype testing which would have been the best option for this purpose would not only prove costly but also be associated with numerous practical difficulties; hence model testing is resorted as the only option for the purpose. This paper presents one such typical experimental study on the structural behavior of a distressed bridge, mainly observed in the form of prominent tilt in the bearing plate in transverse and longitudinal direction on downstream side. The main focus of the proposed experimental investigation is to assess the structural behavior particularly the load carrying capacity. The extent of deformation of some models with specific structural arrangements and some models with specific need based remedial measures were also studied. This study also assessed the contribution of each remedial measure towards restoration individually and collectively.

• Journal of the Korean Society of Systems Engineering
• /
• v.6 no.1
• /
• pp.33-39
• /
• 2010

Anti-surface missiles have been the most dangerous threat to the surface ships, therefore analyzing the defense effectiveness of surface ships against diverse anti-surface missiles attack strategies is very important to evaluate and anticipate the naval combat ship's abilities in terms of AAW (Anti-Air Warfare). In this paper, we don't study on the defense effectiveness of a ship against a missile, but focus on the defense effectiveness for surface ships against multiple missiles specialized in strategies of anti-surface missiles; ripple fire attack and simultaneous time on target attack (STOT). So, we conduct a variety of monte-carlo simulations with high-fidelity simulators, analyze the measure of defense effectiveness for the key factors of strategies and evaluate the effects and possible interactions of several factors through the analysis of the design of experiment (DOE).

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.295-298
• /
• 2009

Bent ducts add loss and decrease efficiency. Many researchers have been conducted the performances of bent ducts, but their shapes of inlet and outlet are same. However, in this investigation, the focus is on a bent duct which is annular at the inlet and circular at the outlet. The bent duct of these complex shapes has not been investigated, but has been used in many fields. The performance of such bent duct is investigated under inlet speed 54 m/s and Re = 238,000. Wall static pressure tappings are located surface of the bent duct to measure the static pressure and a probe is traversed at the inlet and outlet of the bent duct to measure the total pressure. As a result, it presents static pressure distribution on the bent duct surface, streamwise velocity profile at inlet and outlet of the bent duct and total pressure loss profile at outlet. In this investigation, the total pressure loss coefficient is 0.243.

• Journal of Families and Better Life
• /
• v.9 no.1 s.17
• /
• pp.241-257
• /
• 1991

The objectives of this study are : to measure the level of rent burden. to examine the independent influences of the variables related to rent burden. to measure the level of family economic problem perception. to examine the differences in the level of family economic problem perception due to rent burden, household characteristics, housing characteristics and rent incresing. For these purpose, a survey is conducted using questionaires. The data used in this study included 369 renters living in Seoul. Statistics uses for data analysis were Frequency Distribution. Percentile, men, Pearson's Correlation, Partial Correlation, One-way ANOVA, Breakdown and Multiple Regression Analysis. Major findings are as follows : The average score of rent burden was 35.87, Therefore rent burden of large cities, rental households is very heavy. Family income, housing facility quality, rent type, and rent incresing have independent influences on rent burden. The average of family economic problem perception is above the mid-point of the scale. The level of family economic problem perception differs due to rent burden, family income, family life cycle, family size, occupation of household head, education leval of household head and homemaker, rent type, housing type, housing size, housing facility quality and rent increases. If the level of rent burden is below 25, family economic problem perception is adequate.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.8
• /
• pp.645-651
• /
• 2020

The concept of social entrepreneurship (SE) is gaining attention in developing economies for the purpose of greater societal welfare maximization. Still, findings in the field of SE studies have been riddled with conflicting results and counterstatement. Also, the determinants of developing SE are not robustly investigated in developing economies like Bangladesh. This context has mobilized the authors of this current study to focus on determining student's intention to pursue SE as their career choice. Hence, the study aims to examine the predictive determinants of social entrepreneurial intentions (SEI) among Bangladeshi students. The study has investigated the influence of entrepreneurial self-efficacy, social support, prior experience, and educational support on SEI. The survey was conducted from a public university of Bangladesh, and 231 students participated in the study. Questionnaire items under each construct variable have been adopted from pre-tested research studies. Five-point Likert scale questionnaire was applied to measure the variables. SPSS version 23.0 has been used for statistical analysis through which correlation and multiple regression analysis were conducted to measure the impact of the independent variables on SEI. Results exhibited that self-efficacy, social support, and educational support positively and significantly predicted SEI, while prior experience does not influence SEI.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.252-257
• /
• 2004

Nanometer-sized structures are being applied to many devices including micro/nano electronics, optoelectronics, quantum devices, MEMS/NEMS, biosensors, etc. Especially, the thin film with submicron thickness is a basic structure for fabricating these devices, but its mechanical behaviors are not well understood. The mechanical properties of the thin film are different from those of the bulk structure and are difficult to measure because of its handling inconvenience. Several techniques have been applied to mechanical characterization of the thin film, such as nanoindentation test, micro/nano tensile test, strip bending test, etc. In this study, we focus on the strip bending test because of its high accuracy and moderate specimen preparation efforts, and measure Au thin film, which is a very popular material in micro/nano electronic devices. Au film is deposited on Si substrate by evaporation process, of which thickness is 100nm. Using the strip bending test, we obtain elastic modulus, yield and ultimate tensile strength, and residual stress of Au thin film.

• Journal of Digital Convergence
• /
• v.8 no.4
• /
• pp.205-213
• /
• 2010

In this days, information resources are very important in the organization. So, Many public institutions as well as private companies eager to IRM(information resource management). Especially, one of core elements in this IRM is server's performance. Determinating server's performance is a big issue of an acquired organization. In this paper, we examine the key performance issue of server purchase and then we proposed the three measurement method of sever's performance that is considered environment of public sector.

• 전자공학회논문지 IE
• /
• v.47 no.1
• /
• pp.48-55
• /
• 2010

The goal of this paper is to determine optimal hardware platform for specific applications. In order to develop an understanding of how select the optimal platform, we focus upon the real-time embedded vehicle system for processing forward image and sound. In this paper we propose to measure parameters such as instructions, execution cycle, required memory size for program and data by using ARMulator. We have measured three types of processor cores: ARM7, ARM9 and ARM10. The results of the study indicated that the proposed methods could measure the minimal requirements of hardware platform for specific applications. By defining lower limit of hardware specifications in embedded systems, we can minimize expenses with suitable system performance without implementing the system.

• Journal of information and communication convergence engineering
• /
• v.11 no.2
• /
• pp.124-131
• /
• 2013

Extraction and representation of postures and/or gestures from human activities in videos have been a focus of research in this area of action recognition. With various applications cropping up from different fields, this paper seeks to improve the performance of these action recognition machines by proposing a shape-based silhouette-edge descriptor for the human body. Information entropy, a method to measure the randomness of a sequence of symbols, is used to aid the selection of vital key postures from video frames. Morphological operations are applied to extract and stack edges to uniquely represent different actions shape-wise. To classify an action from a new input video, a Hausdorff distance measure is applied between the gallery representations and the query images formed from the proposed procedure. The method is tested on known public databases for its validation. An effective method of human action annotation and description has been effectively achieved.