• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.585-590
• /
• 1997

Conventional foaming process has defects such as lower mechanical properties than ur~foaming material due to non-uniform cell distribution and environmental pollution problem caused by chemical blowing agency. So, a new foaming process such as Microcelluar plastics has been introduced to use inactive gases as a foaming agency. In order to apply Microcellular plastics for mass production process system such as extrusion, injection molding and blow molding, it needs to predict the change in material properties of polymer according to the amount of meltingas. In Polymer molding applying Microcelluar plastics, the change of viscosity among several material properties is the most important factor. Therefore, this paper is aimed to establish the method which not only finds out but also predicts the change of viscosity of ABS(Acrylonitri1e Butadiene Styrene) resin according to inert gas amount in extrusion molding.

• 한국시뮬레이션학회논문지
• /
• 제28권2호
• /
• pp.81-88
• /
• 2019

능동배열안테나는 원전계에 있는 표적과 지형 등을 탐지/추적하기 때문에 개발 간 항공기 탑재 전 시험 수행을 위해 원전계 거리 조건을 만족하게 하는 수십 미터 이상의 지상 시험장이 필요하다. 따라서 빔 조향, 표적, 클러터 및 재밍 등의 시험 수행을 위해 지상에서 높은 곳에 실험실을 구축하는 야외 실험장을 구축하는 것이 일반적이다. 하지만 야외 실험장은 주변 지형, 날씨, 외부 신호등으로 인해 시험에 영향을 받으며, 시간/공간/비용적인 제약사항이 많다. 이러한 문제를 해결하기 위해 근전계에서 빔을 집속 시키는 이론적인 방안이 제시되었지만, 이를 실험실 환경으로 구축하기 위해서는 AESA 레이다 하드웨어의 변화를 초래한다. 본 논문에서는 관련 하드웨어와 소프트웨어의 변화 없이 AESA 레이다를 구성하는 안테나 송수신 모듈의 편차를 보정하기 위해 단일 LUT를 이용해 근전계의 빔 집속을 구현하는 기법을 제안한다. 제안한 기법은 원전계 실험 환경 및 다중 LUT를 이용한 근전계 빔 집속 구현 기법보다 실험 비용을 최소화하면서도 유사한 실험 결과를 도출할 수 있는 장점이 있다.

• 한국산업보건학회지
• /
• 제24권3호
• /
• pp.281-292
• /
• 2014

Objectives: The aim of this case study is to verify the chemical exposure reductions for various chemicals by substituting the ingredients of raw materials in a polyurethane(PU) foaming industry. The PU foaming process was making various passenger car seats from chemicals such as toluene diisocinate(TDI), methylene bisphenyl isocyanate(MDI) and polyols. Methods: Basic process data and workers' health effects could be gathered by interviewing managers and reviewing previous exposure monitoring data. Amine, aldehyde and isocyanate chemicals were analyzed following the NIOSH-NMAM. Area sampling methods rather than personal sampling were introduced for this field investigation. Results: Two amines, triethylene diamine(TEDA) and N,N,N',N'-Tetramethyl-1,6- hexanediamine(TMHDA) were identified in raw polyol, cured PU foam and air. The average concentrations of TEDA and TMHDA showd less than 1 ppm by area sampling; however, that caused halovision among workers in PU-PAD process. Aldehydes and isocyanates were detected in the air while the concentrations were relatively low compare to occupational exposure limits. Successful raw material substitution from nonreactive amine to reactive amine could reduces air-borne amine and aldehyde levels by about 70%. Halovision had been disappeared successfully in the process. Conclusions: Several amines caused halovision among workers in PU-PAD process, especially during summer season in spite of relatively low levels. Combination of reactive amines into urethane foam could reduced vapor generation into air, which resulted in the elimination of eye troubles in the process.

• 한국응용과학기술학회지
• /
• 제20권4호
• /
• pp.283-288
• /
• 2003

Alkaline powder cleaning agents (APCAs) were prepared by blending of $Na_2CO_3$ tetrasodium pyrophosphate (TSPP). sodium orthosilicate (Na-OSi), Na-dioctyl sulfosuccinate (303C), Demol C, and MJU-100A (100A). The physical properties of APCAs tested with steel specimen showed the following results. The cleaning powers of APCA-6 ($Na_2CO_3$ 250g/TSPP 70g/Na-OSi 40g/303C 60g/Demol C 50g/100A 30g mixture) for press-rust preventing oil was 97% and 98% degreasing at 2wt%, $70^{\circ}C$ and $90^{\circ}C$, respectively; for Quenching oil, the cleaning power of APCA-6 was 95% degreasing at 2wt% and $70^{\circ}C$. From the results, it was ascertained that APCA-6 exhibited a good cleaning power. Also low foaming power tests proved that the APCA-6 maintained good defoaming effect.