• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2014년도 추계학술대회 논문집
• /
• pp.101-102
• /
• 2014

수소제조용 SMR(steam methane reforming) 공정에 사용될 수 있는 FeCrAl 다공체의 지지체-촉매의 결합력을 향상시키기 위하여 PEO(plasma electrolytic oxidation)법을 이용하여 FeCrAl 표면에 산화물을 형성시켰다. 열처리, 저전압, 고전압, 전해질 농도 등의 공정 조건에 따른 산화막의 형성 거동 및 형성된 산화물의 상분석 등을 진행하였다. PEO 공정을 이용하여 형성된 산화막은 다른 공정에 의하여 형성된 산화막과 비교할 때 치밀한 특징을 보였다. 따라서 본 연구를 통하여 향후 SMR 공정에 사용될 수 있는 FeCrAl 다공체의 내구성 및 수명 향상에 도움을 줄 것으로 기대되었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.174-179
• /
• 2004

The growth of the critical size bubble by diffusion process in viscoelastic medium was treated by an integral method for the concentration boundary layer adjacent to the bubble wall. In this study, we obtained a set of the first order time dependent equations to obtain bubble radius and gas pressure inside the bubble simultaneously. The calculated final cell sizes depending on the initial saturation pressure are in close agreement with the observed ones. The governing equations developed in this study may be used in polymer processing of microcellular foams.

• 대한예방한의학회지
• /
• 제5권1호
• /
• pp.134-143
• /
• 2001

The oxidative modification of low density lipoprotein(LDL) has been implicated in the development of atherosclerosis. Oxidized LDL are found in macrophage foam cell, and it can induce an macrophage proliferation in atherosclerotic plaque. In this study, we investigated the hypothesis that gamisoyosan(GS) may reduce atherosclerosis by lowering the oxidiazability of LDL, To achive this goal, we examined the effect of GS on LDL oxidation, nitric oxide production in mouse macrophage cell line, RAW264.7, and the effect of GS on cupuric sulfate-induced cytotoxicity, LDH release, and macrophage activity. GS inhibited the generation of oxidized LDL from native LDL in RAW264.7 cell culture, and decreased the release of LDH from cupric sulfate-stimulated RAW264.7 cell. In other experiments, GS activated RAW264.7 cell, and prolonged the survival time, and increased nitric oxide production in Raw 264.7 cells.

• Design & Manufacturing
• /
• 제17권1호
• /
• pp.64-69
• /
• 2023

This paper explores the impact of gate shape changes on the size and density of foamed cells in microcellular foam injection molding. Five different gate shapes were examined while varying the amount of nitrogen gas(N2) injected for foaming. Analysis of the results showed that while average values did not change significantly, deviation values decreased by approximately 65% for cell size and 56% for density when 3.5wt% of nitrogen gas was injected in the film gate. Further analysis was conducted to verify this phenomenon, revealing that the contact area between the gate and product had the greatest impact. Our findings indicate that to ensure uniform generation of foamed cells in microcellular foaming product design, a gate with a wide contact area should be secured.

• 한국산업보건학회지
• /
• 제24권3호
• /
• pp.281-292
• /
• 2014

Objectives: The aim of this case study is to verify the chemical exposure reductions for various chemicals by substituting the ingredients of raw materials in a polyurethane(PU) foaming industry. The PU foaming process was making various passenger car seats from chemicals such as toluene diisocinate(TDI), methylene bisphenyl isocyanate(MDI) and polyols. Methods: Basic process data and workers' health effects could be gathered by interviewing managers and reviewing previous exposure monitoring data. Amine, aldehyde and isocyanate chemicals were analyzed following the NIOSH-NMAM. Area sampling methods rather than personal sampling were introduced for this field investigation. Results: Two amines, triethylene diamine(TEDA) and N,N,N',N'-Tetramethyl-1,6- hexanediamine(TMHDA) were identified in raw polyol, cured PU foam and air. The average concentrations of TEDA and TMHDA showd less than 1 ppm by area sampling; however, that caused halovision among workers in PU-PAD process. Aldehydes and isocyanates were detected in the air while the concentrations were relatively low compare to occupational exposure limits. Successful raw material substitution from nonreactive amine to reactive amine could reduces air-borne amine and aldehyde levels by about 70%. Halovision had been disappeared successfully in the process. Conclusions: Several amines caused halovision among workers in PU-PAD process, especially during summer season in spite of relatively low levels. Combination of reactive amines into urethane foam could reduced vapor generation into air, which resulted in the elimination of eye troubles in the process.

• 한국축산시설환경학회지
• /
• 제9권1호
• /
• pp.45-56
• /
• 2003

$TAO^{TM}$ System is an auto-heated thermophilic aerated digestion process using a proprietary microbe called as a Phototropic Bacteria (PTB). High metabolic activity results in heat generation, which enables to produce a pathogen-free and digested liquid fertilizer at short retention times. TAO$^{TM}$ system has been developed to reduce a manure volume and convert into the liquid fertilizer using swine manure since 1992. About 100 units have been installed and operated in Korean swine farms so far. TAO$^{TM}$ system consists of a reactor vessel and ejector-type aeration pumps and foam removers. The swine slurry manure enters into vessel with PTB and is mixed and aerated. The process is operated at detention times from 2 to 4 days and temperature of 55 to $65^{\circ}C$. Foams are occurred and broken down by foam removers to evaporate water contents. Generally, at least 30% of water content is evaporated, 99% of volatile fatty acids caused an odor are removed and pathogen destruction is excellent with fecal coliform, rotavirus and salmonella below detection limits. The effluent from TAO$^{TM}$ system, called as the "TAO EFFLUX", is screened and has superb properties as a fertilizer. Normally N-P-K contents of screened TAO Efflux are 4.7 g/L, 0.375 g/L and 2.8 g/L respectively. The fertilizer effect of TAO EFFLUX compared to chemical fertilizer has been demonstrated and studied with various crops such as rice, potato, cabbage, pumpkin, green pepper, parsley, cucumber and apple. Generally it has better fertilizer effects and excellent soil fertility improvement effects. Moreover, the TAO EFFLUX is concentrated through membrane technology without fouling problems for a cost saving of long distance transportation and a commercialization (crop nutrient commodity) to a gardening market, for example.

• Preventive Nutrition and Food Science
• /
• 제1권1호
• /
• pp.134-142
• /
• 1996

Diabetes carries an increased risk of atherosclerotic disease that is not fully explained by known car-diovascular risk factors. There is accumulating evidence that advanced glycation of structural proteins, and oxidation and glycation of circulating lipoproteins, are implicated in the pathogenesis of diabetic ather-osclerosis. Reactions involving glycation and oxidation of proteins and lipids are believed to contribute to atherogenesis. Glycation, the nonenzymatic binding of glucose to protein molecules, can increase the ather-ogenic potential of certain plasma constituents, including low density lipoptotein(LDL). Glycation of LDL is significant increased in diabetic patients compared with normal subjects, even in the presence of good glycemic control. Metabolic abnormalities associated with glycation of LDL include diminished recognition of LDL by the classic LDL receptor; increased covalent binding of LDL in vessel walls ; enhanced uptake of LDL by the macrophages, thus stimulating foam cell formation ; increased platelet aggregation; formation of LDL-immune complexes ; and generation of oxygen free radicals, resulting on oxidative damage to both the lipid and protein components of LDL and to any nearby macromolecules. Oxidized lipoproteins are characterzied by cytotoxicity, potent stimulation of foam cell formation by macrophages, and procoagulant effects. Combined glycation and oxidation, "glycoxidation" occurs when oxidative reactions affect the initial products of glycation, and results in irreversible structural alterations of proteins. Glycoxidation is of greatest significance in long lived proteins such as collagen. In these proteins, glycoxidation products, believed to be atherogenic, accumulate with advancing age : in diabetes, their rate of accumulate is accelerated. Inhibition of glycation, oxidation and glycoxidation may form the basis of future antiaterogenic strategies in both diabetic and nondiabetic individuals.dividuals.

• Composites Research
• /
• 제19권5호
• /
• pp.12-19
• /
• 2006

본 논문에서 한국해양연구원에서 개발 중인 20인승급 소형 위그선의 주익 구조 설계 및 해석에 관한 연구를 수행하였다. 경량화를 위해 탄소/에폭시 복합재료를 적용하였으며, 구조 형태는 스킨 스파 폼 샌드위치 구조를 사용하였다. 개념 설계에는 복합재 설계 개념을 반영하였고, 상세 설계 및 경량화 구조 설계에는 상용 유한 요소 코드인 NASTRAN을 이용하여 구조 설계를 수행하였다. 여러 단계의 구조 설계 변경을 통해 최종 구조 설계 결과는 설계 요구 조건을 만족하는 결과임을 확인하였다. 또한 주익을 동체에 고정하기 위해 8개의 고강도 볼트를 이용한 삽입 볼트형 구조가 용이한 장탈과 20넌 이상의 피로 수명의 고려를 통해 채택되었다.

• 대한기계학회논문집A
• /
• 제28권12호
• /
• pp.1958-1967
• /
• 2004

This paper describes the method to rapidly fabricate the large-sized physical model with the envelope model size of more than 600 mm${\times}$ 600 mm${\times}$ 600 mm using two type semi-automatic VLM-ST processes in connection with the reverse engineering technology. The fabrication procedure of the large-sized solid shape is as follows: (1) Generation of STL data from 3D scan data using 3D scanner, (2) generation of shell-type STL data by Boolean operation, (3) division of shell-type STL data into several pieces by solid splitting, (4) generation of USL data for each piece with VLM-Slicer, (5) fabrication of each piece by cutting and stacking according to USL data using VLM-ST apparatus, (6) completion of a shell-type prototype by zigzag stacking and assembly for each piece, (7) completion of a 3D solid shape by foam backing, (8) surface finish of a completed 3D solid shape by coating and sanding. In order to examine the applicability of the proposed method, the miniature of the Mount Rushmore Memorial has been fabricated. The envelope model size of the miniature of the Mount Rushmore Memorial is 1,453 mm${\times}$ 760 mm${\times}$ 853 mm in size. From the result of the fabricated miniature of the Mount Rushmore Memorial, it has been shown that the method to fabricate the large object using two type semi-automatic VLM-ST processes in connection with the reverse engineering technology are very fast and efficient.

• 한국해안·해양공학회논문집
• /
• 제31권4호
• /
• pp.199-208
• /
• 2019

2차원 조파수조에서 완전반사 조건의 규칙파 조파 실험을 수행하고, 세 가지 서로 다른 CFD 모델의 성능을 검증하였다. 사용된 CFD 모델은 CADMAS-SURF, olaFlow 및 KIOSTFOAM이었다. 쇄파가 발생하지 않는 조건, 중복파의 쇄파가 발생하는 조건, 입사파의 쇄파가 발생하는 조건에서 실험 및 모델링을 수행하였다. 그 결과 세 모델 중 KIOSTFOAM이 실험결과를 가장 잘 재현하는 것으로 나타났다. CADMAS-SURF는 KIOSTFOAM에 비해 계산 시간은 줄어들지만 계산 정확도가 상대적으로 더 낮았다. olaFlow는 계산은 가장 빠르지만 조파 경계에서 반사파 흡수가 만족스럽지 않고 쇄파 발생 시 파랑에너지를 과도하게 소산시키는 것으로 나타났다.