• 자원환경지질
• /
• 제53권5호
• /
• pp.543-552
• /
• 2020

본 연구는 플로리다 주 Silver Springs 유역 내 카르스트 대수층의 지하수 플럭스를 측정하기 위해 플럭스미터(passive flux meter)와 단공희석시험(borehole dilution test)을 수행하였다. 또한 카르스트 대수층 내 분포하는 두 영역인 암반 매질(matrix)과 균열암반 매질(non-matrix)에 따른 플럭스미터의 성능도 함께 평가하였다. 그 결과 유속이 낮은 암반 매질 영역에서는 플럭스미터의 측정값(5.96 ± 1.75 cm/day)이 단공희석시험의 측정값(4.68 ± 2.99 cm/day)과 유사하게 나타났다. 반면, 유속이 빠른 균열암반 매질 영역에서는 플럭스미터의 측정값(9.94 ± 0.90 cm/day)과 단공희석시험의 측정값(1817.37 ± 1795.50 cm/day)이 큰 차이를 보였다. 이와 같은 결과는 지하수가 플럭스미터 내부 흡착제를 완전히 통과한다고 가정하였으나, 빠른 지하수 플럭스(>11 cm/day)를 가진 균열암반 매질 영역의 경우 지하수가 플럭스미터의 활성탄 담체를 통과하지 못하고 플럭스미터와 관측공 사이의 공간으로 우회하여 흐르기 때문으로 판단된다. 따라서 기존의 플럭스미터는 11 cm/day 이하의 지하수 플럭스 측정에 적합하며, 지하수 플럭스가 11 cm/day 이상인 대수층에서 사용할 수 있는 새로운 플럭스미터의 개발이 필요할 것으로 생각된다.

• Journal of Welding and Joining
• /
• 제18권6호
• /
• pp.68-73
• /
• 2000

In case of overalyered wrapping roll, beadmark shape appear at wrapping roll surface due to irregular wear between weld bead. Irregular wear of this is caused by difference of hardness between weld bead. This study aims at investigating which matrix is good for removing of beadmark at wrapping roll surface. So, we make specimen with martensitic matrix and austenitic matrix. The overlayered alloys were deposited 4 times on a SS41 steel plate using self-shielding flux cored arc welding method. Difference of hardness between weld bead of specimen with matrix of martensite was higher than specimen with matrix of austenite both as-welded and after heat treatment. Therefore, austenitic matrix is between than martensitic matrix for removing of beadmark of wrapping roll surface.

• Carbon letters
• /
• 제2권3_4호
• /
• pp.192-201
• /
• 2001

The Carbon/Carbon composite was prepared from 3D carbon fiber preform and coal tar pitch as matrix precursor. In order to evaluate of ablative characteristics of the composite, liquid rocket system was employed Kerosene and liquid oxygen was used as propellants, operating at a nominal chamber pressure of 330 psi and a nominal mixture ratio (O/F) of 2.0. The results of an experimental evaluation were that high density composite exhibited high, while low density composites showed low erosion resistance. The erosion rate against heat flux was highly depended on the density of the materials. The morphology of eroded fiber showed differently according to collision angle with heat flux on the composite. The granular matrix which derived from carbonization pressure of 900 bar was more resistance to heat flux than well-developed flow type matrix.

• International Journal of Control, Automation, and Systems
• /
• 제5권6호
• /
• pp.652-662
• /
• 2007

This paper presents a new and simple method for sensorless operation of matrix converter drives using a constant air-gap flux and the imaginary power flowing to the motor. To improve low-speed sensorless performance, the non-linearities of a matrix converter drive such as commutation delays, turn-on and turn-off times of switching devices, and on-state switching device voltage drop are modeled using PQR transformation and compensated using a reference current control scheme. The proposed compensation method is applied for high performance induction motor drives using a 3 kW matrix converter system. Experimental results are shown to illustrate the feasibility of the proposed strategy.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1999년도 추계 학술대회논문집
• /
• pp.48-58
• /
• 1999

The Characteristic Flux Difference Splitting (CFDS) scheme designed to adapt the characteristic boundary conditions at the wall and inflow/outflow boundary planes satisfies Roe's property U, although the CFDS Jacobian matrix is decomposed by a product of elaborate transformation matrices and explicit eigenvalue matrix. When the CFDS algorithm, thus a variant of Roe's scheme, is applied straightforwardly to hypersonic flows over a blunt body, the strong bow shock gradually breaks down near the stagnation point. This numerical instability is widely observed by many researchers employing flux-difference method, known in the literature as the carbuncle phenomenon. Many remedies have been proposed and resulted in partial cures. When the idea of Sanders et al. which identifies the minimum eigenvalues near the discontinuity present is applied to CFDS method, it is shown that the instability problem can be controlled successfully. A few flux splitting methods have also been tested and results are compared against the Nakamori's Mach 8 blunt body flow.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(1)
• /
• pp.282-287
• /
• 1996

We. develop in this study a wavelet transform method to apply to the flux reconstruction problem in reactor analysis. When we reconstruct pinwise heterogeneous flux by iterative methods, a difficulty arises due to the near singularity of the matrix as the mesh size becomes finer. Here we suggest a wavelet transform to tower the spectral radius of the near singular matrix and thus to converge by a standard iterative scheme. We find that the spectral radios becomes smatter than one after the wavelet transform is performed on sample problems.

• Journal of Electrical Engineering and Technology
• /
• 제13권4호
• /
• pp.1596-1603
• /
• 2018

This paper presents the new design and validation process of the linear transverse flux machine of the stelzer machine for hybrid vehicle application. A linear transverse flux machine is a novel electric machine that has higher force density and power than conventional electric machine. The process concentrates on 2-dimensional and 3-dimensional analysis using equivalent magnetic circuit method considering leakage elements and it is verified by finite element analysis. Besides the force characteristics of all axis of each direction are analyzed. The study is considered by dividing the transverse flux electric excited type and the transverse flux permanent magnet excited type. Additionally three-dimensional analysis in this machine is accomplished due to asymmetric structure with another three axes. Finally, it suggests the new design and validation process of linear transverse flux machine for stelzer machine.

• Journal of Radiation Protection and Research
• /
• 제11권1호
• /
• pp.3-14
• /
• 1986

$3'{\times}3'$ 원통형 NaI(T1) 검출기와 다중파고분석기(多重波高分析器)를 사용하여 측정한 $0.05{\sim}2.0MeV$ 구간의 ${\gamma}$선 spectrum에서 실(實)spctrum을 구하기 위하여 조사선량율(照射線量率)산출에 편리한 response matrix 방법을 사용하였다. Response mateix 구성에는, 위의 에네지 구간을 0.1 MeV의 등간격으로 나눈 $20{\times}20$ matrix로 한것과 검출기의 분해능이 입사 ${\gamma}$선 에너지의 평방근(平方根)에 의존한다는 가정하에 $0.1(MeV)^{1/2}$구간으로 나누어 $14{\times}14$ matrix로 구성한, 두가지 방법을 사용하였으며 그 역(逆)matrix들은 P-E 82/32 콤퓨터로 계산하였다. 이 방법으로 얻은 조사선량율은 에너지와 flux가 알려진 ${\gamma}$선량(陽)에 대하여 흔히 사용되는 계산방법으로 구한값과 10% 이내에서 일치하고 있으며, 선량측정학적(線量測定學的) 견지에서는 $E^{1/2}$ 구간으로 형성된 matrix가 등에너지간격으로 구성된 것보다 현실적인 것으로 판단되었다.

• Journal of Pharmaceutical Investigation
• /
• 제41권1호
• /
• pp.1-7
• /
• 2011

The effects of different formulation variables including pressure sensitive adhesive (PSA), permeation enhancer, thickness of the matrix and loading amount of drug on the transdermal absorption of galantamine were investigated across the hairless mouse skin. The permeation profile of galantamine was different depending on the types of PSA, loading amount of drug, thickness of the matrix and type of enhancer used. Highest flux of galantamine was obtained from acrylic PSA but crystals were formed in the patch within 72 h. Among the PSAs screened, crystal formation was not observed only in the patches formulated in Styrene Butadiene Styrene (SBS) matrix. Permeation rate increased linearly as the concentration of galantamine in SBS matrix increased from 2.5 to 15% w/w. Among the enhancers screened, Brij$^{(R)}$ 30 provided highest flux of galantamine. Matrix thickness of 80 ${\mu}m$ was optimum for maintaining adhesiveness as well as consistently delivering galantamine for longer period of time.

• Membrane and Water Treatment
• /
• 제14권4호
• /
• pp.175-180
• /
• 2023

Mixed matrix membranes (MMMs) can be a promising alternative for the solution of dye removal from coloured effluents. Polymeric membranes are widely used due to their good film-forming ability, flexibility, separation properties, and cost. However, they have low mechanical, chemical, and thermal resistances. Moreover, the fouling of polymeric membranes is high because of their hydrophobic nature. Hence, there is an increasing interest in organic-inorganic hybrid membranes as a new-generation membrane material. It has been shown that carbon nanotubes have the potential to increase the material properties of polymers with their low density, high strength, hardness, and exceptional aspect ratio. In this work, carbon nanotubes blended MMMs were prepared and methyl orange removal efficiency of them was investigated. Compared to the bare membranes, MMMs showed not only increased hydrophilicity, water content, and pure water flux but also increased methyl orange rejection and flux recovery