• Journal of Korean Society for Atmospheric Environment
• /
• 제21권E3호
• /
• pp.75-85
• /
• 2005

A mathematical sensitivity analysis of the flow-through dynamic flux chamber technique, which has been utilized usually for various trace gas flux measurement from soil and water surface, was performed in an effort to provide physical and mathematical understandings of parameters essential for the NO flux calculation. The mass balance equation including chemical reactions was analytically solved for the soil NO flux under the steady state condition. The equilibrium concentration inside the chamber, $C_{eq}$, was found to be determined mainly by the balance between the soil flux and dilution of the gas concentration inside the chamber by introducing the ambient air. Surface deposition NO occurs inside the chamber when the $C_{eq}$ is greater than the ambient NO concentration ($C_{0}$) introducing to the chamber; NO emission from the soil occurs when the $C_{eq}$ is less than the ambient NO concentration. A sensitivity analysis of the significance of the chemical reactions of NO with the reactive species (i.e. $HO_{2},/CH_{3}O_{2},/O_{3}$) on the NO flux from soils was performed. The result of the analysis suggests that the NO flux calculated in the absence of chemical reactions and wall loss could be in error ranges from 40 to $85\%$ to the total flux.

• 한국항공우주학회지
• /
• 제31권4호
• /
• pp.76-81
• /
• 2003

Kerosene/LOX를 추진제로 사용하는 액체로켓의 추력실에서 발생하는 열유속을 측정하기 위하여 calorimetric combustion chamber를 제작하여 연소실험을 수행하였다. 본 실험에 사용된 calorimetric combustion chamber는 연소실 및 노즐 부분이 각각 하나의 구역으로 제작되었으며, 각각의 구역에서 발생하는 열유속을 측정하기 위하여 냉각제의 출구에 열전대를 설치하였다. 실험은 O/F ratio 2.0에서 연소압 100psi에서 300psi까지 수행하였다. 본 실험에서 연소실에서 복사 열전달은 고려하지 않았다. 측정된 열유속은 연소압에 다라 거의 선형적인 변화를 보였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권2호
• /
• pp.395-402
• /
• 2001

The gasoline engine tends to high performance, fuel economy, small-sized. Therefore, it is necessary to solve the problems on thermal load, abnormal combustion, etc, in the engine, Thine film instantaneous temperature measurement probe was made. And the manufactural method of probe was established. The instantaneous surface temperatures in the constant volume combustion chamber were measured by this probe and the heat flux was obtained by Fourier analysis. The authors measured the wall temperature of combustion chamber and computed the heat flux through the cylinder wall in order to understand the combustion characteristics depending on height of probe. For achieving this goal, the thin film instantaneous temperature probe was developed for analyzing the instantaneous surface wall temperature and unsteady heat flux on the constant volume combustion chamber.

• 한국산업융합학회 논문집
• /
• 제6권3호
• /
• pp.193-200
• /
• 2003

In the production of internal combustion engines, there has been a move towards the development of high performance engines with improved fuel efficiency, lighter weight and smaller sizes. These trends help to answer problems in engines related to thermal load and abnormal combustion. In order to investigate these problems, a thin film-type probe for instantaneously measuring temperatures has been suggested. A method for manufacturing such a probe was established in this study. The instantaneous surface temperature of a constant volume combustion chamber was measured by this probe and the heat flux was obtained through Fourier analysis. In order to thoroughly understand the characteristics of combustion, the authors measured the wall temperature of the combustion chamber and computed heat flux through a cylinder wall while varying the protrusion height of the probe. For achieving the above goals, a instantaneous temperature probe was developed, thereby making possible the analysis of the instantaneous temperature of wall surface and the detection of unsteady heat flux in the constant volume combustion chamber.

• 한국항공우주학회지
• /
• 제31권3호
• /
• pp.65-71
• /
• 2003

일반적으로 액체로켓 엔진의 추력실에서 연소중 어느 정도의 열 유속을 발생하는가를 아는 것은 추력실을 냉각하기 위한 가장 중요한 사항 중에 하나이다. 이에 본 연구에서는 Kerosen/LOx를 추진제로 사용하는 소형 액체로켓 엔진의 추력실에서 발생하는 heat flux를 측정하기 위하여 thin wall chamber를 제작하였다. wall thickness는 1mm로 하였으며 추력실 외벽에 총 9개의 열전쌍을 부착하여 연소시험을 수행함으로써 연소중 변화하는 추력실의 외벽온도를 측저하였다. System을 1차원 비정상상태로 가정하고 측정된 추력실의 외벽온도로부터 one-dimensional the transient energy equation을 이용하여 추력실에서 발생하는 열유속 및 열전달계수를 예측하였다. 혼합비 2,0의 조건에서 실험변수로서 연소압에 변화를 주었으며 실험결과 열전달계수가 연소압에 0.88승에 비례하는 관계식을 얻어낼 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권7호
• /
• pp.1055-1062
• /
• 2004

As for the Production of internal combustion engines there has been further movement toward development of high Performance engines with improved fuel efficiency as well as a lightweight and a small size. These tendencies help to solve the problems in engines for example, such as thermal load. abnormal combustion and so on. In order to investigate these Problems, a thin film-type probe for measuring instantaneous temperature has been suggested. A method for manufacturing such a probe was established in this study The instantaneous surface temperature of a constant volume combustion chamber was measured by using this probe and the heat flux was obtained through Fourier analysis In order to thoroughly understand the characteristics of combustion. authors measured wall temperature of combustion chamber and calculated heat flux through a cylinder wall while varying the protrusion height of probe. For these Purposes, the instantaneous surface temperature probe was developed. thereby making possible the analysis of instantaneous temperature of wall surface and the detection of unsteady heat flux in the constant volume combustion chamber.

• 한국환경보건학회지
• /
• 제36권1호
• /
• pp.33-43
• /
• 2010

Atmospheric ammonia is a very important constituent of the environment because it is the dominant alkaline gaseous species present in the atmosphere. Ammonia is known to affect ecosystems at relatively low concentration. In this study flux profiles of ammonia emitted from the cattle housing were evaluated using a dynamic flux chamber (DFC). We have developed the emission factor of $NH_3$ from the cattle housing. Analysis of ammonia flux variation was made with respect to such variables as manure surface temperature, pH, and ammonium concentration. Ammonia flux has been measured up to summer in 2007 at calf and cattle housing. In the fall, average ammonia flux from calf and cattle housing was estimated as 1.406 (${\pm}0.947$) and 1.534 ((${\pm}0.956$) $mg\;m^2\;min^1$, respectively. In the winter, average ammonia flux was estimated 1.060 ((${\pm}0.569$) from the calf housing and 1.216 ((${\pm}0.655$) $mg\;m^2\;min^1$ from the cattle housing. The correlation coefficient (R=0.732) between ammonia flux and manure surface ammonium concentration exhibited stronger relationship than manure surface pH and temperature. In the fall, ammonia emission factor from calf and cattle housing was estimated as 3.94 ((${\pm}2.66$) and 11.41 ((${\pm}5.86$) kg-$NH_3$ animal$^1\;yr^1$, respectively. In the winter, ammonia average flux was estimated as 2.89 ((${\pm}1.59$) from the calf housing and 6.51 ((${\pm}3.67$) kg-$NH_3$ animal$^1\;yr^1$ from the cattle housing.

• 한국자동차공학회논문집
• /
• 제12권3호
• /
• pp.75-82
• /
• 2004

The allowable exhaust standard has been intensified as a part of the countermeasure to decrease air pollution in the world. As the cars with an alternative fuel starts to get into the spotlight, the cars with low emission has been introduced and exhaust gas regulation forced in this country. These days, LPG vehicles, which infrastructure of fuel was already built up, and CNG vehicles are recognized for alternative fuel cars in this country. In this study, the constant volume combustion chamber was manufactured and used for experiments to obtain the ignition characteristics of LPG fuel and the optimal ignition energy. The experiment measured the combustion characteristics, in regard to the change of combustion variable, and the change of ignition energy. During the combustion of fuel, the maximum temperature inside the combustion chamber is higher when the initial pressure is higher. The burning velocity also seems to have the same characteristic as the temperature. However, the heat flux did not change much with the theoretical correct mixture but the various initial temperature of the combustion chamber. The heat flux got faster and ignition energy bigger as the dwell time of the ignition system expanded. When the dwell time get longer, the ignition energy also increased then fixed. The ignition energy increased as the initial pressure inside the combustion chamber higher. The heat flux got faster as the dwell time expanded.

• 환경영향평가
• /
• 제14권5호
• /
• pp.263-273
• /
• 2005

In this study, the major emission procedures and emission characteristics were identified at the site of sewage treatment plant which is one of the major sources of ammonia. At the same time the emission factors and emission rates were estimated. In order to calculate the emission flux, we used a Dynamic Flux Chamber(DFC), which is found to be a proper sampling devise for area sources such as sewage treatment plant. It was found that the most stable sampling condition was when the stirrer's speed of DFC was 120RPM, and it would be the best time to take a sample 60 minutes later after setting the chamber. The relatively higher flux was shown in Autumn compared to summer and winter. Annual ammonia emission rates procedures were calculated as $906.32{\mu}g/activity-ton$, $1,114.72{\mu}g/activity-ton$ and $437.53{\mu}g/activity-ton$ each at the primary settling basin, aeration basin and the final settling basin, respectively. The ammonia emission rate the highest at in the aeration basin according to this test. This results was due to that the surface of aeration basin or the final settling basin is relatively wider than the primary settling basin.

• 한국추진공학회지
• /
• 제8권1호
• /
• pp.81-84
• /
• 2004

KSR-III 축소형 연소기를 원형으로 하는 8채널 형태의 물냉각 칼로리미터를 설계/제작하였다. 설계는 1차원 경험식을 이용하였으며 시험전에 3차원 전산유동해석을 수행하여 연소시험을 위한 냉각 조건의 안전성을 확인하였다. 탄소침착물의 단열효과를 고려할 경우 노즐목 부근에서 예측한 열유속이 정확성을 가지는 것으로 확인되었으며 연소실 부근에서는 상대적으로 큰 오차를 보였다.