• 제목/요약/키워드: Fluosilicate salt

검색결과 8건 처리시간 0.022초

수밀 콘크리트용 규불화염계 무기 조성물을 첨가한 콘크리트 수밀성 및 균열저감 특성 (Watertightness and Crack Reduction Property of Concrete added Fluosilicate Salt Based Inorganic Compound for Watertight Concrete)

  • 김도수;길배수;최세진;박민용;이성연;여병철
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2004년도 학술대회지
    • /
    • pp.33-38
    • /
    • 2004
  • This study was performed to know watertightness and reduction effect and crack occurred by hydration heat, restraint of multiplication of hydration heat, through mechanical test, strength test and crack control test using fluosilicate salt based inorganic compound made from by-product during phosphoric acid manufacturing process. Mix proportions for experiment were modulated at 0.45 of water to cement ratio and $0.5-2.0\%$ of adding ratio of fluosilicate salt based inorganic compound. Evaluation for watertightness of concrete was carried out permeability, absorption test and porosity analysis. Effect of crack reduction was evaluated by length, drying shrinkage as well as stress change of hardened concrete at unrestraint/restraint state and also elucidated crack pattern on the concrete surface. It is ascertained that characteristics of crack resistance and watertightness for concrete was improved by an adequate addition of fluosilicate salt based inorganic compound.

  • PDF

규불화염계 혼화제를 사용한 콘크리트의 특성 및 현장적용성 평가 (The Properties of Concrete(BlueCon) using Fluosilicate Salt Based Admixtures and Estimation of Field Application)

  • 최세진;조재형;김도수;오주열;이성용;이성연
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
    • /
    • pp.359-362
    • /
    • 2005
  • This study was performed to know the properties and estimation of field application of concrete(Bluecon) using fluosilicate salt based admixture made from by-product during phosphoric acid manufacturing process. Mix proportions for experiment were modulated at 0.45 of water-binder ratio and $0.5-2.0\%$ of adding ratio of fluosilicate salt based inorganic compound. Evaluation for Field application of concrete was carried out batch plant test at remicon factory and building construction. According to results. it was found that slump of concrete(Bluecon) using fluosilicate salt based admixture is higher about 10 to 20 mm than plain concrete, and air content is similar to each other. And the water permeability and crack of bluecon is lower than that of plain concrete.

  • PDF

규불화염계 균열저감제를 이용한 콘크리트의 균열제어특성 (Fundamental Characteristics of Crack Control for Concrete Used in Fluosilicate Salt Based Anti-crack Agent)

  • 강성웅;양일승;한병찬;김도수;길배수;윤현도
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
    • /
    • pp.289-292
    • /
    • 2004
  • This study was performed to know effective control of crack occurred by hydration heat, restraint of multiplication of hydration heat, through mechanical test, strength test and crack control test using fluosilicate salt based anti-crack agent made from by-product during phosphoric acid manufacturing process. Mix proportions for experiment were modulated at 0.495 of water to cement ratio and addition amount of fluosilicate salt based anti-crack agent to $1.0\%$. Condensation time was late and compressive strength of hardened concrete cured at several days was executed to evaluate characteristics of crack control for concrete. It is ascertained that characteristics of crack control for concrete could be improved by an adequate addition of fluosilicate salt based anti-crack agent.

  • PDF

규불화염계 복합 조성물을 혼입한 콘크리트의 균열제어 및 내구성 (Durability and Crack Control of Concrete Using Fluosilicates Based Composite)

  • 윤현도;양일승;김도수;길배수;한승구
    • 콘크리트학회논문집
    • /
    • 제18권1호
    • /
    • pp.57-64
    • /
    • 2006
  • 콘크리트에 균열이 발생하면 구조물의 구조적인 결함, 내구성 저하, 외관손상 등을 유발하여 치명적인 손실을 초래하기 때문에 균열제어를 통한 내구성능의 증대가 필수적이다. 국내 콘크리트 구조물의 동향을 살펴보면 LCC개념에 비추어 구조물의 신축비용이 25%에 불과하고, 다양한 형태의 균열보수, 개수, 유지관리 및 폐기처분에 대한 비용이 75%를 차지함에 따라 구조물의 시공시 콘크리트의 균열발생과 시공 후 콘크리트 내 철근부식을 억제하는 기술이 요구된다고 할 수 있다. 본 연구에서는 1990년대 후반부터 인산(H3PO4) 및 불산(HF)을 제조하는 공정 중에 액상형태의 부산물로 회수되는 불화규산(H2SiF6)을 활용하여 안정한 액상형태로 제조되는 규불화염계 화합물에 의한 균열저감 특성과 내구성에 대한 검토를 수행한 결과, 규불화염계 무기 조성물의 첨가로 수밀성이 증진되어 치밀한 경화조직을 형성함으로써 경화 후 급격한 수분의 손실에 따른 경화수축이 억제되어 건조수축을 저감시키는 특성을 발휘하였다. 또한 수화온도 및 수축 저감에 의해 조기에 균열발생을 억제하고, 수밀성을 증진시킴으로써 중성화, 동결융해저항성 및 염소이온침투깊이에 있어서 무첨가 콘크리트에 비해 상당히 개선되는 효과를 확인하였다. 마지막으로, 콘크리트 변형이 크게 발생되는 복합열화 환경 하에서도 SWP-2에 의한 내구성 향상 효과가 확인되었다.

규불화염계 혼화제를 사용한 콘크리트의 수밀성 및 경화특성에 관한 실험적 연구 (Experimental study on the watertightness and hardening properties of concrete using fluosilicate salt based chemical admixture)

  • 이정열;김재온;한승구;강용식;길배수;남재현
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
    • /
    • pp.36-39
    • /
    • 2004
  • In this study, effects of fluosilicate salt based chemical admixture(MZ) on the watertightness and hardening properties of concrete were investigated. Mix proportions for experiment were modulated at 0.55 of water to cement ratio and addition amount of MZ to $2.0\%$ at intervals $0.5\%$. Compressive strength, porosity and microstructure of hardened concrete cured at several days were executed to evaluate watertightness and hardening properties. It is ascertained that watertightness and hardening properties of concrete could be improved by an adequate addition of fluosilicate salt based chemical admixture.

  • PDF

규불화염계 수화열 저감제가 첨가된 시멘트 모르타르의 수화열 변화 및 균열저감 특성 (Hydration Heat and Crack-Reducing Properties of Cement Mortar Added Fluosilicate Salt Based Hydration Heat Reducer)

  • 김진용;이효송;이영우;김도수;이병기;길배수;한승구
    • 한국세라믹학회지
    • /
    • 제42권3호
    • /
    • pp.198-204
    • /
    • 2005
  • 본 연구에서는 규불화염, 가용성 실리카, 방향족계 고분자 축합물 그리고 잠열특성을 지닌 질산염계 무기화합물로 구성된 규불화염계 수화열 저감제를 시멘트 모르타르의 수화열 및 건조수축에 미치는 영향을 조사하였다. 규불화염계 수화열 저감제의 첨가로 시멘트 모르타르의 단열상승온도 및 건조수축에 의한 길이변화가 저감되는 특성을 나타내었다. 또한, 규불화염계 수화열 저감제가 첨가된 판상형 시멘트 모르타르 시험체의 균열 패턴을 측정한 결과, 수화열 저감과 건조수축에 의해 길이변화가 저감되는 복합적 효과를 통해 시멘트 모르타르의 균열저감성이 개선되는 것을 확인하였다.

2성분 규불화염계 혼화제가 첨가된 시멘트의 수화반응 및 수밀성 변화 (Changes in Hydration and Watertightness of Cement Containing Two-Component Fluosilicate Salt Based Chemical Admixture)

  • 김재온;남재현;김도수;길배수;이병기
    • 한국세라믹학회지
    • /
    • 제41권10호
    • /
    • pp.749-755
    • /
    • 2004
  • 불화규산($H_2SiF_6$)은 인산 혹은 불산 제조공정에서 발생되는 사불화규소($SiF_4$)의 흡수공정에 의해 수용액 상태로 회수된다. 불화규산과 금속염의 반응에 의해 생성된 규불화염을 시멘트에 첨가하면 시멘트와의 특이 수화반응에 의해 독특한 물성을 발휘된다. 본 연구에서는 상기 공정에 의해 회수된 불화규산(농도 : $25\pm2\%$)과 금속염을 반응시켜 3가지 농도($4\%,\;6\%,\;8\%$)의 2성분 규불화염계 혼화제(MZ)를 제조하고, 시멘트 중량의 동일 첨가량($C\times1.0\%$)에서 시멘트 수화반응 및 수밀성에 대해 MZ의 농도변화에 따른 효과를 관찰하였다. MZ가 첨가된 시멘트 수화과정중 $CaF_2$와 같은 난용성 금속불화물과 가수분해에 의한 가용성 실리카가 새로이 생성되었다. MZ가 첨가된 경화시멘트의 총 공극율은 난용성 금속불화물의 충전작용과 가용성 실리카의 포졸란 작용에 의해 감소되었다. 궁극적으로 시멘트와 MZ간의 특이 수화반응에 의해 MZ가 첨가된 시멘트 경화체의 수밀성이 개선되는 것으로 나타났다.

규불화염계 복합 조성물을 사용한 콘크리트의 수밀특성에 관한 실험적 연구 (Experimental Study on Watertightness Properties of Concrete Using Fluosilicates Based Composite)

  • 정원섭;박동수;권기주;김정우;김도수
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
    • /
    • pp.429-432
    • /
    • 2008
  • Large area members such as foundation concrete of underground structures in power plants have an effect on structural stability and durability of the structure due to danger of crack occurrence and shrinkage crack that occur owing to the difference of temperature by heat of hydration between inside and outside of the members at initial age. And a construction for waterproofness is performed additionally to protect marine structures from osmosis of seawater because the structures adjoin below the surface of sea. So, if a rise of the heat of hydration, crack, and corrosion of bars are controled effectively using a composite such as fluosilicate salt in concrete production process of a initial construction, expenses are cut down and construction hours are reduced by securing durability through improvement of watertightness. The property tests of adiabatic temperature by hydration are carried out at initial age about standard concrete and test concrete using a fluosilicate salt composite to evaluate an effect on improvement of watertightness for concrete structures in this study. And the experiments such as a permeability test of hardened concrete, a water absorption test, a compression strength test and a elongation test are carried out and the results from these are described.

  • PDF