• 미생물학회지
• /
• 제55권3호
• /
• pp.199-205
• /
• 2019

Yeast two-hybrid는 특정 단백질에 대한 상호작용 파트너 단백질의 선별을 위한 방법으로 개발되었다. 하지만 대규모 단백질 상호작용체 분석을 수행하기에 요구되는 노동과 대량의 한천배지 사용에 따른 문제에 의해 널리 사용되지 못하고 있다. 따라서 본 연구에서는 새로운 리포터 시스템을 yeast two-hybrid 방법에 도입하여 fluorescence-activated cell sorting (FACS) 또는 magnetic-activated cell sorting (MACS)를 이용하여 상호작용 파트너 단백질을 포함하는 효모 클론을 손쉽게 선별할 수 있도록 하였다. 새로운 리포터 시스템은 c-myc 항원 결정기가 총 10번 반복되는 형태로 효모 표면에 발현되도록 하였으며, p53과 SV40 T항원을 이용한 실험을 통하여 리포터 단백질의 정상적인 발현을 flow cytometry 분석을 통하여 확인하였다. 따라서, 새로운 리포터 시스템을 도입한 yeast two-hybrid 방법은 대규모 상호작용체 분석을 위해 필요한 노력을 현저히 줄일 수 있을 것으로 기대한다.

• Journal of Biosystems Engineering
• /
• 제41권2호
• /
• pp.138-144
• /
• 2016

Purpose: Phosphorus is an essential element for water quality control. Excessive amounts of phosphorus causes algal bloom in water, which leads to eutrophication and a decline in water quality. It is necessary to maintain the optimum amount of phosphorus present. During the last decades, various studies have been conducted to determine phosphorus content in water. In this study, we present a comprehensive overview of colorimetric, electrochemical, fluorescence, microfluidic, and remote sensing technologies for the measurement of phosphorus in water, along with their working principles and limitations. Results: The colorimetric techniques determine the concentration of phosphorus through the use of color-generating reagents. This is specific to a single chemical species and inexpensive to use. The electrochemical techniques operate by using a reaction of the analyte of interest to generate an electrical signal that is proportional to the sample analyte concentration. They show a good linear output, good repeatability, and a high detection capacity. The fluorescence technique is a kind of spectroscopic analysis method. The particles in the sample are excited by irradiation at a specific wavelength, emitting radiation of a different wavelength. It is possible to use this for quantitative and qualitative analysis of the target analyte. The microfluidic techniques incorporate several features to control chemical reactions in a micro device of low sample volume and reagent consumption. They are cheap and rapid methods for the detection of phosphorus in water. The remote sensing technique analyzes the sample for the target analyte using an optical technique, but without direct contact. It can cover a wider area than the other techniques mentioned in this review. Conclusion: It is concluded that the sensing technologies reviewed in this study are promising for rapid detection of phosphorus in water. The measurement range and sensitivity of the sensors have been greatly improved recently.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2002년도 하계학술발표회
• /
• pp.104-105
• /
• 2002

Hyper-Rayleigh scattering(HRS)방법을 이용하여 쌍극자와 새로이 합성된 팔중극자들의 1차 초분극율 $\beta$를 측정하였다. External reference 법을 이용하였고, reference 물질로는 잘 알려져 있는 쌍극자인 PNA를 이용하여 Disperse Red 1과 팔중극자들의 1차 초분극율 $\beta$의 값을 구하였다. 또한 HRS 의 세기뿐만 아니라 이들 물질의 two-photon induced fluorescence 스펙트럼을 측정하였다. 1차 초분극율 $\beta$값은, 먼저 시료로부터 scattering 된 신호를 파장변화에 따른 스펙트럼으로 측정하여 two-photon induced fluorescence를 뺀 순수한 HRS 신호만을 이용하고, 실험에 사용된 물질들은 532nm에서 흡수가 있어 second harmonic generation 신호가 시료에 의해 흡수가 되므로 흡수효과를 식 $I_{2{\omega}}$(obs)= $I_{2{\omega}}$(true) $e^{-{\sigma}lN}$ ---(1)를 이용하여 흡수에 의한 신호의 감소 효과를 보정하여 값을 구했다. (중략)

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제9권4호
• /
• pp.241-244
• /
• 2004

Protein A molecular thin film was fabricated as a platform of antibody-based biosensor. For the immobilization of the protein A thin film, a viologen multilayer was built up using the Langmuir-Blodgett (LB) technique, and then, protein A was adsorbed on the viologen LB film by an electrostatic interaction force, which was formed as a hetero-film structure. For the deposition of viologen, surface pressure area ($\pi$-A) isotherm was investigated. The fabricated protein A-viologen hetero LB film was investigated using atomic force microscopy (AFM). Using the developed molecular film, antibody immobilization and fluorescence measurement was carried out.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1225-1230
• /
• 2004

The effects of substrate material on the local heating performance of microheaters are studied by both numerical analysis and experiment. Transient conduction analysis shows that the substrate material with low thermal conductivity is critical to the local heating and fast response. A measurement technique for surface temperature field in microscale is newly proposed, which uses temperature sensitive fluorescent dye coated on the surface. The measured surface temperature fields on microheater arrays fabricated on different substrates are presented.

• 한국가시화정보학회지
• /
• 제11권1호
• /
• pp.16-21
• /
• 2013

In this study, diffusion coefficients of 20 kDa FITC-dextran in 2% agarose gel with different cell concentrations were measured using fiberoptic-based fluorescence recovery after photobleaching technique. As increasing cell concentration suspended in agarose gel, the diffusion coefficients were decreased. The diffusion coefficient of agarose gel which contains $10{\times}10^6$ cells/ml was decreased to 11% that of in agarose gel without cells. The distribution of fluorescence dye in 3D scaffold was also simulated. The simulation result shows that the diffusion coefficient is more significant factor than the scaffold structure.

• International Journal of Fluid Machinery and Systems
• /
• 제2권2호
• /
• pp.121-126
• /
• 2009

The internal flow field in a centrifugal pump working at the several flow conditions has been measured by using the particle image velocimetry (PIV) technique with the laser induced fluorescence (LIF) particles and the refractive index matched (RIM) facilities. The impeller of the centrifugal pump has an outlet diameter in 100mm, and consists of six two-dimensional curvature backward swept blades of constant thickness. Measured results give reliable flow patterns in the pump. It is obvious that application of LIF particle and RIM are the key methods to obtain the right PIV measured results in pump internal flow.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.486-491
• /
• 2008

The spray characteristics and drop size measurements have been experimentally studied in liquid jets injected into subsonic crossflow. With water as fuel injection velocity, injection angle and atomizer internal flows were varied to provide of jet operation conditions. The injector internal flow was classified as three modes such as a non-cavitation flow, cavitation, and hydraulic flip flows. Pulsed Shadowgraph Photography measurement was used to determine the spatial distribution of the spray droplet diameter in a subsonic crossflow of air. And this study also obtains the SMD(Sauter Mean Diameters) distribution by using PLLIF(Planar Liquid Laser Induced Fluorescence) technique. The objectives of this research are getting a droplet distribution and drop size measurement of each condition and compare with the other flows effect. As the result, This research have been showed the droplet size were spatially dependent on air-stream velocity, fuel injection velocity, injection angle effects and normalized distance from the injector exit length.(x/d, y/d)There are also different droplet size characteristics between cavitation, hydraulic flip and the non-cavitation flows.

• 한국자동차공학회논문집
• /
• 제2권4호
• /
• pp.91-99
• /
• 1994

Tunable KrF Excimer Laser is used here for measuring OH and $O_2$ density distribustion in an open $H_2$/air premixed flame and in a combustion bomb. Laser Rayleigh Scattering(LRS) and Planar Laser Induced Predissociative Fluorescence(PLIPF) methods are used to obtain two-dimensional images of total and specific densities. Laser Excitation wavelengths are calibrated via flame images and combustion bomb images show good qualitative a greement with theoretical calculation. Furthermore images in a combustion bomb can be developed to study real Spark-Ignition engine combustions. Our experimental images show that there are no more collisional quenching problem at high pressure environment(including atmospheric pressure) using predissociative fluorescence technique. Further development to obtain two-dimensional temperature dustribution is ready to use eventhough it is not reported in this paper.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2002년도 추계학술대회 논문집
• /
• pp.101-104
• /
• 2002

Simultaneous measurement of turbulent velocity and concentration field in a stirred mixer tank is carried out by using PIV/LIF technique. Instantaneous velocity fields are measured by a $1K\times1K$ CCD camera adopting the frame straddle method while the concentration fields are obtained by measuring the fluorescence intensity of Rhodamine B tracer excited by the second pulse of Nd:Yag laser light. Image distortion due to the camera view-angle is compensated by a mapping function. It is found that the general features of the mixing pattern are quite dependent on the local flow characteristics during the rapid decay of mean concentration. However, the small scale mixing seems to be independent on the local turbulent velocity fluctuation.