• YAKHAK HOEJI
• /
• v.30 no.6
• /
• pp.323-328
• /
• 1986

This paper describes on the distribution of polynuclear aromatic hydrocarbons (PAHs) in various size of atmospheric particulate matter (A.P.M.). A.P.M. in Seoul city were collected on guartz fiber filter according to particle size using an Andersen high volume air sampler from Feb. 1983 to March 1984. And 7 PAHs [benzo(a)pyrene, benzo(k)fluoranthene, benzo(ghi)perylene, benzo(e) pyrene, perylene, chrysene, and pyrene] were analyzed by high performance liquid chromatography. The concentration of A.P.M. showed spring-winter maxima and summer-autumn minia. The A.P.M. was lowest in the concentration at the 1.1~3.3$\mu\textrm{m}$ particulates, and the concentration increased as the particle size increased or decreased. But the concentrations of PAHs increased with the decrease in the particle size, and were predominant in winter. The correlations among the PAHs were high. And there fore, benzo(a)pyrene concentration could be considered as the representive of PAHs.

• Proceedings of the Korea Society of Environmental Biology Conference
• /
• 2002.11a
• /
• pp.154-162
• /
• 2002

인간이나 환경에 해로운 영향을 주는 지속성 유기오염물질의 독성을 동물플랑크톤 중 요각류를 대상으로 실험하였다. 실험에 사용된 요각류는 장목만에서 주로 가을에 많은 출현을 보인 Acartia erythraea와 늦가을부터 그 다음해 봄까지 우점하는 A. omorli였다. 지속성 유기오염물에 대한 요각류의 독성을 평가하기 위해 3가지의 실험을 실시하였다. 광양만에서 주로 나타나는 5가지 PAHs에 대한 A. omorli 48h-LC50을 구하였고, 온도에 따른 Benzo(a)pyrene과 TBT의 독성의 변화를 Brine shrimp(Artemia)를 이용해 실험하였으며, PAHs 중에서 독성이 강한 Benso(a)Pyrene에 노출된 먹이를 섭취한 Acartia erythraea와 A. omorli의 egg Production, hatching rate, fecal Pellet의 변화를 측정하였다. A. omorli의 48h-LC50으로 조사된 결과 Fluoranthene과 Benzo(a)pyrene의 독성이 강하게 나타난다. 온도실험에서는 동일한 유해물질을 가지고 실험을 하더라도 온도의 변화에 따라 급격한 독성의 차이가 나타날 수 있고, 유해물질간에도 온도에 따라서 나타나는 독성에 대한 특성이 다르게 나타났다. Benzo(a)Pyrene에 노출된 먹이는 요각류의 egg Production, hatching rate, fecal Pellet에 영향을 미치고 있으며, 특히 농도와 실험시간에 따른 부정적 영향들을 보였다.

• Food Science and Industry
• /
• v.55 no.1
• /
• pp.45-57
• /
• 2022

This study was proceeded the analytical methods using various analytical instruments for polycyclic aromatic hydrocarbons (PAHs) in food products. Various analytical methods were developed to determine levels of PAHs including benzo[a]pyrene, benzo[a]anthracene, benzo[b]fluoranthene, and chrysene formed in various food products using gas chromatography-mass spectrometry (GC-MS), enzyme-linked immunosorbent assay (ELISA) and raman spectroscopy. Recently, the rapid on-site response for the detection of hazardous substances in food aims to develop an onsite rapid detection of a simplified technical analysis method to reduce the time and cost required for analysis of PAHs. Current PAHs detection methods have been reviewed along with new raman spectroscopy analytical method.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.8
• /
• pp.574-582
• /
• 2012

This study presents the concentrations of the polycyclic aromatic hydrocarbons (PAHs) listed as priority pollutants by United States Environmental Protection Agency (US EPA), in 98 sludges from 54 industrial wastewater treatment facilities of South Korea. The mean concentrations of ${\Sigma}_{16}PAHs$ were ranged from 32.5 ${\mu}g/kg-dw$ to 1189.3 ${\mu}g/kg-dw$ by industries, and the highest content was found in the petrochemical industry, followed by chemical, clothing manufacturing and dying, pulp and papermaking, secondary wastewater treatment, and food/beverage producing industries. Comparisons to the EU and Danish standards of ${\Sigma}_{16}PAHs$ in sewage sludge for land application showed only two samples (one from petrochemical, and the other from chemical industry) exceeded the limits. ANOVA test with PAH concentrations as variables revealed no statistically significant influences by industrial types and sampling time (i.e., seasonal variations). Pearson correlations between individual PAHs showed strong relationships (r>0.7) among 4-ring PAHs. Concentrations of acenaphthylene, anthracene, fluoranthene, benzo(a)anthracene, benzo(f)fluoranthene, benzo(k)fluoranthene, benzo(a)pyrene presented strong correlations to ${\Sigma}_{16}PAHs$. Principal component analysis discriminated entire samples into three groups by two principal components (PC1 and PC2) with 70% of data variations, in which industrial types were not of importance, but a dominance of certain PAHs. Samples in group-I, which is high PC1 and low PC2, were characterized by a dominance of 2-ring PAHs, and in group-II, PC1 and PC2 showed a linear relation, was dominant 4-ring PAHs. Group-III with low PC1 and high PC2 includes 17 samples showing a noticeably high contribution of 3-ring PAHs to ${\Sigma}_{16}PAHs$. This study provides concentrations of PAHs in industrial sludges collected from a wide variety of sources (six industrial types) and two seasons of sampling events, and the comparison of ${\Sigma}_{16}PAHs$ with other studies are also discussed.

• Korean Journal of Environmental Biology
• /
• v.22
• /
• pp.1-10
• /
• 2004

We conducted three experiments to estimate the toxicity of POPs (persistent organic pollutants) on two copepod species (Acartia erythraea and A. omorii) and Artemia sp.; (1) 48 h-LC$_{50}$ of A. omorii with the five PAHs [polycyelic aromatic hydrocarbons anthracene, benzo〔a〕pyrene, fluoranthene, phenanthrene, pyrene〕 which were often detected in the Gwangyang Bay, (2) toxicity of benzo〔a〕pyrene and TBT on Artemia in different temperatures (1$0^{\circ}C$, 15$^{\circ}C$, 2$0^{\circ}C$), (3) effects of benzo〔a〕pyrene and TBT on egg Production rate, hatching rate and fecal Pellet Production of two copepod species (A. erythraea and A. omorii) fed on Heterocapsa triquetra (dinoflagellate) exposed in benzo〔a〕pyrene. Toxic chemicals which were most effective to A. omorii were flueranthene (48 h-LC$_{50}$ 19.20 $\mu\textrm{g}$ L$^{-1}$ ) and benzo〔a〕pyrene (48 h-LC$_{50}$ 29.89 $\mu\textrm{g}$ L$^{-1}$ ). The toxi- city of chemicals to Artemia increased when temperature increased. The toxicity of TBT was about 100 times higher than that of benzo〔a〕pyrene at 15$^{\circ}C$. Food materials (Heterocapsa triquetra) exposed in benzo〔a〕pyrene, affected negatively the rate of egg production, hatching rate and the fecal pellet production of the copepods at the high concentration. It is suggested that an increase in the concentration of benzo〔a〕pyrene might offset the production of copepods in marine ecosystems. This study suggests that copepods may be used as n indicator for early warning of the risk of POPs in marine ecosystems.

• Journal of Korean Society for Atmospheric Environment
• /
• v.28 no.5
• /
• pp.538-555
• /
• 2012

The purpose of this study was to understand $PM_{2.5}$ chemical characteristics on the Suwon/Yongin area and further to quantitatively estimate $PM_{2.5}$ source contributions. The $PM_{2.5}$ sampling was carried out by a high-volume air sampler at the Kyung Hee University-Global Campus from November, 2010 to October, 2011. The 40 chemical species were then analyzed by using ICP-AES(Ag, Ba, Cr, Cu, Fe, Mn, Ni, Pb, Si, Ti, V and Zn), IC ($Na^+$, $K^+$, $NH_4{^+}$, $Mg^{2+}$, $Ca^{2+}$, $NO_3{^-}$, ${SO_4}^{2-}$ and $Cl^-$), DRI/OGC (OC1, OC2, OC3, OC4, OP, EC1, EC2 and EC3) and GC-FID (acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene, pyrene, benzo[a]anthracene, benzo[b]fluoranthene, benzo[a] pyrene, indeno[1,2,3-cd] pyrene, benzo[g,h,i]perylene and dibenzo[a,h,]anthracene). When applying PMF model after performing proper data treatment, a total of 10 sources was identified and their contributions were quantitatively estimated. The average contribution to $PM_{2.5}$ emitted from each source was determined as follows; 26.3% from secondary aerosol source, 15.5% from soil and road dust emission, 15.3% from vehicle emission, 15.3% from illegal biomass burning, 12.2% from incineration, 7.2% from oil combustion source, 4.9% from industrial related source, and finally 3.2% from coal combustion source. In this study we used the ratios of PAHs concentration as markers to double check whether the sources were reasonably classified or not. Finally we provided basic information on the major $PM_{2.5}$ sources in order to improve the air quality in the study area.

• Korean Journal of Microbiology
• /
• v.41 no.3
• /
• pp.201-207
• /
• 2005

A phenanthrene-degrading bacterium HS362, which is capable of using phenanthrene as a sole carbon and energy source, was isolated from oil contaminated soil. This strain is a gram negative, rod shaped organism that is most closely related to Sphingomonas paucimobilis based on biochemical tests, and belongs to the genus Sphingomonas based on fatty acids analysis. It exhibited more than $99.2{\%}$ nucleotide sequence similarity of 16S rDNA to that of Sphingomonas CF06. Thus, we named this strain as Sphingomonas sp. HS362. It degraded $98{\%}$ of phenanthrene after 10 days of incubation when phenanthrene was added at 500 ppm and $30{\%}$ even when phenanthrene was added at 3000 ppm. Sphingomonas sp. HS362 could also degrade low molecular weight PAHs(Polycyclic aromatic hydrocarbons) such as indole and naphthalene, but was unable to degrade high molecular weight PAHs such as pyrene and fluoranthene. The optimum temperature and pH for phenanthrene degradation were $30^{\circ}C$ and $4{\~}8$, respectively. Sphingomonas sp. HS362 could degrade phenanthrene effectively in the concentration range of NaCl of up to $1{\%}$. Its phenanhrene degrading ability was enhanced by preculture, suggesting the possibility of induction of phenanthrene degrading enzymes. Starch and surfactants such as SDS, Tween 85, and Triton X-100 were also able to enhance phenanthrene degradation by Sphingomonas sp. HS362. It carries five plasmids and one of them, plasmid p4, is considered to be involved in the degradation of phenanthrene according to the plasmid curing experiment by growing at $42^{\circ}C$.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.7
• /
• pp.735-742
• /
• 2008

In order to evaluate the levels and distribution patterns, the concentrations of PAHs and chlorophenols were investigated in sludge samples discharged from 6 WWTPs located along Nak-dong river and 7 STPs in Busan, Korea. Levels of 16 PAHs and 19 chlorophenols in sludge samples ranged from 1.28 to 44.9 mg/kg dry wt. and from 213 to 3,850 $\mu$g/kg dry wt., respectively. Levels of PAHs in sludge samples except I5 and S4 were detected lower than those of previous studies. The distribution patterns of PAHs and chlorophenols varied with industrial wastewater sludge samples because industrial wastewater sludge had different industrial input sources. However, the distribution patterns of PAHs and chlorophenols in sewage sludge were pretty similar. Phenanthrene, fluoranthene and pyrene were dominant and the fractions of these 3 PAHs relative to 16 PAHs in sewage sludge ranged from 30.8 to 50.7%. 2-chlorophenol is dominated in most sewage sludge samples and the fraction ranged from 36.0 to 66.8%.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.5
• /
• pp.515-525
• /
• 2007

In this study, various techniques for measurement and analysis of PAHs in the ambient air were verified in order to select a more reliable method. Sampling and analysis of PAHs were done by the EPA TO-13a method. QA/QC of the measurement was conducted to minimize errors in sampling and analyzing processes. The linearity of calibration curve of the PAH standards was good ($R^2{\geq}0.99$). Audit accuracy was evaluated using 5 internal standards of PAHs ($Naphthalene-d_8,\;Acenaphthene-d_{10},\;Phenanthrene-d_{10},\;Chrysene-d_{12},\;Perylene-d_{12}$). Relative standard deviations of the internal standard of the PAHs were ranged from 6.22% for $acenaphthene-d_{10}$ to 8.11% for $chrysene-d_{12}$. To evaluate the surrogate recoveries, two field surrogate standards of PAHs ($fluoranthene-d_{10},\;benzo(a)pyrene-d_{12}$) and two extract surrogate standards of the PAHs ($fluorene-d_{10},\;pyrene-d_{12}$) were spiked into all samples before field sampling and sample extraction, respectively. Recoveries of field the surrogate standards ranged from $80.4{\pm}12.2%$ for $fluoranthene-d_{10}$ to $66.2{\pm}12.8%$ for $benzo(a)pyrene-d_{12}$. Extraction recoveries of the surrogate standards ranged from $70.4{\pm}10.2%$ for $fluorene-d_{10}$ to $77.6{\pm}10.8%$ for $pyrene-d_{10}$. The detection limit of benzo(a)pyrene among 16 PAHs standards for quantitation was 20 pg.

• Korean Journal of Food Science and Technology
• /
• v.41 no.2
• /
• pp.157-161
• /
• 2009

This paper proposes an analytical method for determining amounts of polycyclic aromatic hydrocarbons (PAHs; benzo[a]anthracene, chrysene, benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, dibenzo[a,h]anthracene, benzo[g,h,i] perylene) in coffees beans. Soxhlet extraction and liquid/liquid extraction were tested for the quantification of seven PAHs. Soxhlet extraction was followed by cyclohexane extraction and used a silica cartridge. Liquid/liquid extraction was followed by n-hexane extraction and utilized a florisil cartridge. The extracts were analyzed by HPLC-fluorescence detection (FLD) with a Supelcosil LC-PAH column. The PAH recoveries ranged from 78.68 to 96.28% for the liquid/liquid extraction, and from 67.47 to 84.60% for the Soxhlet extraction.