• 대한기계학회논문집
• /
• 제12권6호
• /
• pp.1438-1449
• /
• 1988

본 연구에서는 입자유동을 연속유체(continuous fluid)라 간주하는 2유체모델 을 적용하였고(Fig.2 참조), 실제 유동으로 2상난류제트유동, 관유동에 개발된 모델을 적용하여 모델의 타당성을 검토하였다.

• Nuclear Engineering and Technology
• /
• 제56권2호
• /
• pp.359-374
• /
• 2024

A high-fidelity numerical analysis methodology was proposed for evaluating the fuel rod cladding integrity of a Prototype Gen IV Sodium Fast Reactor (PGSFR) during normal operation and Design basis events (DBEs). The MARS-LMR code, system transient safety analysis code, was applied to analyze the DBEs. The results of the MARS-LMR code were used as boundary condition for a 3D computational fluid dynamics (CFD) analysis. The peak temperatures considering HCFs satisfied the cladding temperature limit. The temperature and pressure distributions were calculated by ANSYS CFX code, and applied to structural analysis. Structural analysis was performed using ANSYS Mechanical code. The seismic reactivity insertion SSE accident among DBEs had the highest peak cladding temperature and the maximum stress, as the value of 87 MPa. The fuel cladding had over 40 % safety margin, and the strain was below the strain limit. Deformation behavior was elucidated for providing relative coordinate data on each active fuel rod center. Bending deformation resulted in a flower shape, and bowing bundle did not interact with the duct of fuel assemblies. Fuel rod maximum expansion was generated with highest stress. Therefore, it was concluded that the fuel rod cladding of the PGSFR has sufficient structural safety margin during DBEs.

• Korean Chemical Engineering Research
• /
• 제56권1호
• /
• pp.133-138
• /
• 2018

2000년대 이후 대두된 안전, 환경 이슈들로 인해 안전 관리는 더욱 더 중요해졌다. 하지만 안전 관리는 많은 경험적 데이터들을 요구하므로 한계점들이 많다. 안전 분야 중 하나인 배관 안전의 경우 현재 배관을 관리하는 시뮬레이션 프로그램들이 존재하지만, 배관 내부 침식에 대해서는 데이터를 얻기 힘들어 시뮬레이션에 반영이 잘 되어있지 않은 상태이다. 이러한 문제점에서 착안해 본 연구에서는 전산유체역학(CFD)을 이용하여 배관 내부의 곡면에 일어나는 침식을 모사하였고, 계산한 침식 속도를 바탕으로 한계상태함수를 이용하여 배관의 실패 주기를 분석하였다. CFD 대상 배관의 경우 여수 산업 단지에 실제로 운영되고 있는 표본을 사용하였다. DPM (Discrete Phase Model)과 부식 모델을 이용하여 CFD 결과로 $3.093mm{\cdot}yr^{-1}$ 수치의 침식 속도를 얻을 수 있었고, 이 결과를 한계상태함수에 적용한 결과 배관에 누출(leak)을 유발하는데 14.2년, 파열(burst)를 유발하는데 28.2년이라는 실패 주기를 얻어낼 수 있었다. 이러한 과정들을 통해 배관 곡면 침식이 배관 안전 진단에 유효한 실패 모드임을 도출할 수 있었다. 본 연구는 실패 연도를 구할 수 있는 방법론들을 제시하여 데이터의 한계점을 극복하고, 배관 안전 진단에 좀 더 정밀하고 발전된 방법을 제시한 것에 대해 의의를 가진다.

• 한국연소학회지
• /
• 제7권1호
• /
• pp.23-30
• /
• 2002

Instability of oblique detonation waves (ODW) at off-attaching condition was investigated through a series of numerical simulations. Two-dimensional wedge of finite length was considered in $H_2/O_2/N_2$ mixtures at superdetonative condition. Numerical simulation was carried out with a compressible fluid dynamics code and a detailed hydrogen-oxygen combustion mechanism. Present result reveals that there is a chemical kinetic limit of the ODW detachment, in addition to the theoretical limit predicted by Rankine-Hugoniot theory with equilibrium chemistry. Result also presents that ODW still attaches at a wedge as an oblique shock-induced flame showing periodically unstable motion, if the Rankine-Hugoniot limit of detachment is satisfied but the chemical kinetic limit is not. Mechanism of the periodic instability is considered as interactions of shock and reaction waves coupled with chemical kinetic effects. From the investigation of characteristic chemical time, condition of the periodic instability is identified as follows; at the detaching condition of the Rankine-Hugoniot theory, (1) flow residence time is smaller than the chemical characteristic time, behind the detached shock wave with heat addition, (2) flow residence time should be greater than the chemical characteristic time, behind an oblique shock wave without heat addition.

• 대한간호학회지
• /
• 제26권3호
• /
• pp.688-696
• /
• 1996

The purpose of this study was to investigate the fluid balance of the patients who were either on soft fluid diet or total parenteral nutrition. We studied 19 patients with neurologic disorders and 22 patients with oromaxillary surgery who were admitted to either D university hospital in Choognam or S general hospital in Seoul between May and November 1995. The mean age for the patients who had oromaxillary surgery was 24 years and their average hospital stay was 9 days. The mean age of the patients with neurologic disorders was 54 years and they were bedridden for average of 71 days. For the maxillary bone surgery patients we did not limit the range of their activities in the ward during data collection period. The patients with neurological disorders were bedridden and did not move around the ward. They were all either on soft fluid diet, or total parenteral nutrition. The findings of this study are as follows ; 1) The difference of the triceps skinfold thickness between the baseline and the final measurement was 0.4cm for neurologic patient group and 0.5cm for oromaxillary surgery patient group. The difference was not statistically significant in each group. 2) In the oromaxillary surgery patient group, the daily intake of fluid in the form of pure water, other beverages, fluid diet as well as IV fluid was 4581m1 while urine output was 2979ml. The difference between fluid intake and output was statistically significant, indicating that fluid intake was far more than urine output. In neurologic patient group, the daily intake of fluid including water from fluid diet and IV fluid was 2701m1 whereas urine output was 2253m1 and they were statistically significant. 3) For a more accurate assessment we adjusted the fluid balance based on weight changes during data collection period. In the oromaxillary surgery patient group. the difference between fluid intake and output was 1238m1 after weight changes being adjusted. The difference was statistically significant, suggesting fluid overload in this patient group. In neurologic patient group, the difference between fluid intake and output considering weight changes was 124ml. The difference was not statistically significant, suggesting that the fluid intake and output was well balanced in this patient group.

• Journal of Periodontal and Implant Science
• /
• 제26권1호
• /
• pp.161-175
• /
• 1996

There were many reports that elevations in the levels of active and latent collagenase in gingival crevicular fluid(GCF) have been correlated positively with periodontal disease activity. To provide a simple diagnostic approach for testing GCF collagenolytic activity, the detection limit of enzyme activity was compared using radiofibril assay(Sodek et.al.1981) and spectrophotometric collagenolytic assay(Nethery et al. 1986). The detection limits of both assay for standard bacterial enzyme were similar and the radiofibril assay showed a little (1/2) lower detection limit for tad pole collagenase. To evaluate the relationship between periodontal tissue destruction and the collagenolytic activity, GCF was collected, and latent and active enzyme activities were measured by a spectrophotometric collagenolytic assay. Twelve subjects showing progressive lesions were selected according to the presence of immediate tissue destruction, frequent abscess formation, and increasing need for tooth extraction, and the absence of underlying systemic disease and previous antibiotic medication history within 6 months. Comparisons were made between sites with either: 1) inflammation with a previous history of progressive loss of periodontal tissue and bone support(2l progressive sites): 2) previous history of bone loss and periodontal destruction but now clinically stable(12 comparably stable sites); or 3) no loss of periodontal tissue and bone support(11 control sites including 5 gingivitis sites and 6 healthy sites). Active collagenase activity was the highest in the progressive sites and decreased in the order of the gingivitis sites, the stable sites, and the healthy sites. The total enzyme activity was $2{\sim}3$ fold higher in the progressive sites and the gingivitis sites, compared to the stable and the healthy sites. The ratio of active to total collagenolytic activity was twice in the progressive sites. Analysis of active collagenase level(5mU) and the ratio of active to total collagenolytic activity(0.8) as a diagnositic test indicates that these measurements have the sensitivity of 0.81 and 0.86, the specificity of 0.70 and 0.65, and the overall agreement of 0.75 and 0.73, respectively. Thus, this method has significant merits as a diagnostic tool to determine wherher the site is in a state of remission or progression.

• 한국항공우주학회지
• /
• 제34권1호
• /
• pp.24-31
• /
• 2006

본 연구에서는 완전 내재적 기법을 이용한 2계 자유도 모델에 대한 플러터 해석을 수행하였다. 유동해석을 위하여 2차원 Navier-Stokes 지배방정식을 ε-SST 난류모델과 DP-SGS 병렬화 기법을 이용해 구성하였다. 구조해석을 위하여 피치 와 플런지의 2계 자유도를 갖는 모델을 구성하였으며 시간영역에서의 해석을 위하여 유동해석과 마찬가지로 이중 시간 전진 기법을 이용하였다. 가상 시간 전진에서 유체-구조 결합을 통해서 강성결합을 구현하였으며 이를 천음속 플러터 예측에 적용하였다. 플러터 해석의 전형적인 응답인 감쇠응답, 중립응답, 발산응답 및 limit cycle oscillation (LCO) 등을 계산하였으며, 더불어 플러터 속도 경계곡선을 작성하였다. 천음속 플러터 해석은 난류모델 뿐만 아니라 유체-구조 결합 방법에 따라 다른 특성을 보임을 확인하였다.

• 한국태양에너지학회 논문집
• /
• 제37권1호
• /
• pp.15-23
• /
• 2017

Critical heat flux refers to the sudden decrease in boiling heat transfer coefficient between a heated surface and fluid, which occurs when the phase of the fluid near the heated surface changes from liquid to vapor. For this reason, critical heat flux is an important factor for determining the maximum limit and safety of a boiling heat transfer. Recently, it is reported that the nanofluid is used as a working fluid for the critical heat flux enhancement. However, it could be occurred nano-flouling phenomena on the heat transfer surface due to nanoparticles deposition, when the nanofluid is applied in a heat transfer system. In this study, we experimentally carried out the effects of the nano-fouling phenomena in oxidized multi-wall carbon nanotube and oxidized graphene nanofluid systems. It was found that the boiling heat flux decreased by hourly 0.04 and $0.03kW/m^2$, also the boiling heat transfer coefficient decreased by hourly 11.56 and $10.72W/m^2{\cdot}K$, respectively, in the thermal fluid system using oxidized multi-wall carbon nanotube or oxidized graphene nanofluid.

• 한국추진공학회지
• /
• 제8권2호
• /
• pp.25-31
• /
• 2004

본 연구에서는 유연 외팔 구조물의 내부에 유체를 흐르게 함으로써 구조물의 진동을 억제시키는 방법을 제안한다. 안정성 해석과 동적 응답은 유한 요소법에 기초를 두었다. 근 궤적 선도에 있어서 플러터 한계와 최적 안정화 유속을 결정하였다. 진동의 감쇠를 관찰하기 위하여 모드 중첩법이 사용되었다. 시스템의 내부 흐름에 의한 안정화 효과는 구조물의 내부 감쇠를 무시한 경우와 포함한 경우의 임펄스 응답을 통하여 분석하였다. 내부 흐름은 기체의 경우보다도 액체의 경우가 더 큰 안정화 효과가 있다는 결론을 얻어냈다.

• 한국유체기계학회 논문집
• /
• 제13권5호
• /
• pp.35-42
• /
• 2010

This paper deals with the development of analytical model of a turbocharger and its detail rotordynamic analysis. Two analytical models, which are verified by experimental modal testing, are proposed and the analytical model including rotor shaft extended to compressor and turbine wheel end side is chosen. A rotordynamic analysis includes the critical map, Campbell diagram, stability, and unbalance response, especially nonlinear transient response considering nonlinear fluid film force at bearings. Although the linearized analysis accurately predicts the critical speeds, stability limit, and stability threshold speed, the predicted vibration results are not valid for speeds above the stability threshold speed since the rotor vibrates with a subsynchronous component much larger than the one synchronous with rotor speed. Hence, for operating speed above the stability threshold, a nonlinear transient analysis considering nonlinear fluid film force must be performed in order to accurately predict vibration responses of rotor and guarantee results of analysis.