• Journal of Chest Surgery
• /
• v.31 no.2
• /
• pp.95-101
• /
• 1998

Ischemic preconditioning is known to have protective effect on myocardial function at prolonged ischemic insult but the mechanism of the effect is not clearly known. The effect of the preconditioning on the global ischemia using cardioplegic solution is not well known. To evaluate the effect of global myocardial preconditioning on the functional recovery after cardioplegic arrest and two hours of hypothermic storage, we used the isolated rat heart and two hours cardioplegic arrest time at $0^{\circ}C$. In the experimental group(n=10), after baseline functional data was obtained, ischemic preconditioning was induced with 1 min of global normothermic ischemia for three times before the arrest period. In the control group(n=10), hearts underwent no ischemic precondi- tioning. After 2 hrs of cardioplegic arrest and storage in the $0^{\circ}C$ cardioplegic solution reperfusion was done and hemodynamic data were collected at post-reperfusion 20 min. Heart with ischemic preconditioning showed improved functional recovery at post reperfusion 20 min in peak developed pressure and dP/dT. In percent change of the peak pressure, preconditioning group showed 93.20$\pm$15.7% recovery rate compared to baseline data, and control group showed 67.3$\pm$15.6% recovery rate. In percent change of the dP/dT, control group showed 54.7$\pm$18.2% recovery rate and preconditioning group showed 78.1$\pm$15.1% recovery rate. Percent changes in heart rate and coronary flow showed no significant difference between two groups and there was no significant differences in amount of cardioplegic delivery between groups. Our data suggest ischemic preconditioning may have protective effect on recovery state after cardioplegic arrest and 2 hr ischemic storage of isolated rat heart and its mechanism is not related to the amount of the cardioplegic delivery amount.

• Journal of Food Hygiene and Safety
• /
• v.13 no.4
• /
• pp.319-331
• /
• 1998

The purposes of this study were to develop Hazard Analysis Critical Control Point plan applicable to cook/chilled Pork Bulkogi (broiled sliced pork with sauces) in school foodservice operations and to establish reasonable shelf-life limits by assessing food quality during chilled storage period of 5 days. During the product flow, time-temperature profile was recorded and microbiological analyses including mesophilic and psychrotrophic total plate counts, coliform, and fecal coliform and qualitative analyses of Salmonella and Listeria monocytogenes were done. Chemical analyses (pH, acid value, total volatile basic nitrogen), sensory evaluation, and quantitative analysis of thiamin were conducted for 5 days of chilled storage. The number of mesophiles in raw pork ($4.26{\pm}0.11\;Log\;CFU/g$), seasoning mixture ($5.97{\pm}O.04\;Log\;CFU/g$) and marinated pork ($5.56{\pm}0.21\;Log\;CFU/g$) were below the microbial standards for "requires further cooking" food items. Listeria monocytogenes was detected in seasoning mixture. After heating, the number of mesophiles ($5.17{\pm}0.04\;Log\;CFU/g$) were slightly reduced but it did not meet the microbial guidelines of $5\;Log\;CFU/g$ for "ready-to-eat" foods. No other microbes including pathogens were detected. By reheating the menu item after chilled storage, the number of mesophiles were reduced in every phase of 1st day ($4.62{\pm}0.22\;Log\;CFU/g$), 3rd day ($4.55{\pm}0.20\;Log\;CFU/g$) and 5th day ($4.25{\pm}0.16\;Log\;CFU/g$) of chilled storage, and the number of microbes was below the standard limits for "ready-to-eat" foods. At the fifth day of chilled storage, pH (p<0.05), acid value (p<0.01) and TVBN (p<0.05) showed significant increases. Sensory evaluation results did not show any significant change for 5 days of chilled storage. Thiamin content showed a decrease for 5 days of chilled storage. Consequently, the ideal shelflife recommended for Pork Bulkogi was within 3 days of chilled storage. CCPs for Pork Bulkogi were purchasing and receiving of raw meat and some seasoning ingredients, heating, chilling, chilled storage, reheating, and distribution.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.7
• /
• pp.7-14
• /
• 2009

In this paper, the effects of annealing conditions on the structural ((002) intensity, FWHM, d-spacing, grain size, (002) peak position), optical (UV peak, UV peak position) and electrical properties (carrier concentrations, resistivity, mobility) of ZnO films were investigated. ZnO films were deposited onto SiO$_2$/si substrates by RF magnetron sputtering from a ZnO target. The substrate was not heated during deposition. ZnO films were annealed in temperature ranges of $500\sim650^{\circ}C$ in the O$_2$ flow for 5$\sim$20 min. The film average thicknesses were in the range of 291 nm. The surface morphologies and structures of the samples were characterize by SEM and XRD, respectively. The optical properties were evaluated by photoluminescence (PL) measurement at room temperature (RT) using a He-Cd 325 nm laser. As the annealing temperature and time vary, the following relations were also observed: (1) proportional relationships among UV intensity (002) intensity, and grain size exist, (2) UV intensity is inversely proportional to FWHM, (3) there is no special relationship between UV intensity and electron carrier concentrations, (4) d-spacing is inversely proportional to (002) peak position, (5) UV peak position in the range of 3.20$\sim$3.24 eV means that ZnO films have a n-type conductivity which was consistent with that obtained from the electrical property, (6) the optimal conditions for the best optical and structural characteristics were found to be oxygen fraction, (O$_2$/(O$_2$+Ar)) of 0.2, RF power of 240W, substrate temperature of RT, annealing condition of 600$^{\circ}C$ for 20 min, and sputtering pressure of 20 mTorr.

• Journal of Intelligence and Information Systems
• /
• v.17 no.2
• /
• pp.39-60
• /
• 2011

Since the introduction of web 2.0 technology, social network service has been recognized as the foundation of an important future information technology. The advent of web 2.0 has led to the change of content creators. In the existing web, content creators are service providers, whereas they have changed into service users in the recent web. Users share experiences with other users improving contents quality, thereby it has increased the importance of social network. As a result, diverse forms of social network service have been emerged from relations and experiences of users. Social network is a network to construct and express social relations among people who share interests and activities. Today's social network service has not merely confined itself to showing user interactions, but it has also developed into a level in which content generation and evaluation are interacting with each other. As the volume of contents generated from social network service and the number of connections between users have drastically increased, the social network extraction method becomes more complicated. Consequently the following problems for the social network extraction arise. First problem lies in insufficiency of representational power of object in the social network. Second problem is incapability of expressional power in the diverse connections among users. Third problem is the difficulty of creating dynamic change in the social network due to change in user interests. And lastly, lack of method capable of integrating and processing data efficiently in the heterogeneous distributed computing environment. The first and last problems can be solved by using FOAF, a tool for describing ontology-based user profiles for construction of social network. However, solving second and third problems require a novel technology to reflect dynamic change of user interests and relations. In this paper, we propose a novel method to overcome the above problems of existing social network extraction method by applying FOAF (a tool for describing user profiles) and RSS (a literary web work publishing mechanism) to OLAP system in order to dynamically innovate and manage FOAF. We employed data interoperability which is an important characteristic of FOAF in this paper. Next we used RSS to reflect such changes as time flow and user interests. RSS, a tool for literary web work, provides standard vocabulary for distribution at web sites and contents in the form of RDF/XML. In this paper, we collect personal information and relations of users by utilizing FOAF. We also collect user contents by utilizing RSS. Finally, collected data is inserted into the database by star schema. The system we proposed in this paper generates OLAP cube using data in the database. 'Dynamic FOAF Management Algorithm' processes generated OLAP cube. Dynamic FOAF Management Algorithm consists of two functions: one is find_id_interest() and the other is find_relation (). Find_id_interest() is used to extract user interests during the input period, and find-relation() extracts users matching user interests. Finally, the proposed system reconstructs FOAF by reflecting extracted relationships and interests of users. For the justification of the suggested idea, we showed the implemented result together with its analysis. We used C# language and MS-SQL database, and input FOAF and RSS as data collected from livejournal.com. The implemented result shows that foaf : interest of users has reached an average of 19 percent increase for four weeks. In proportion to the increased foaf : interest change, the number of foaf : knows of users has grown an average of 9 percent for four weeks. As we use FOAF and RSS as basic data which have a wide support in web 2.0 and social network service, we have a definite advantage in utilizing user data distributed in the diverse web sites and services regardless of language and types of computer. By using suggested method in this paper, we can provide better services coping with the rapid change of user interests with the automatic application of FOAF.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.3 no.2
• /
• pp.129-136
• /
• 1970

As an attempt to determine if the morphological differences between the southern and western oysters are due simply to the local ecological factors or are based on their fundamental genetic nature, oyster seeds produced in 1968 at Tong-Young, Ye-Chun, and Ko-Hung on the south coast and at Kan-Wol-Do on the west coast were cross-transplanted during May of 1969 to compare their growth. The spats were placed in plastic baskets which permitted free water flow through and the baskets hung from a wooden rack located at a tidal zone of less than I hour exposure at a depth chosen to keep the baskets submerged in water at all times. Twice a month the growth of the spats were measured along with the air and water temperature and salinity. The early summer spats, which were $17-240\%$ larger, in size, than the late summer spats at the time of cross-transplantation, grew more slowly than the late summer spats when exposed to identical environmental conditions, shortening the initial gap to a $5-20\%$ level as the first year of the growth phase came to an end in December. The growth of the Kan-Wol-Do spats lagged considerably behind the southern spats at all localities tested, whereas there were no significant differences among the latter groups. This suggests that the morphological differences between southern and western Pacific oysters in Korea are a manifestation of genetic variety and that Pacific oysters cultured along the south coast are of an identical variety as they are commonly believed to be. The seasonal changes in temperature and salinity even during rainy season in both the southern and western coastal areas are well within the range suitable for successful spawning, and spat fall. However, since the results were based on twice-a-month measurements with no data covering the critical period before and after spawning, they can only serve to indicate at best the general pattern of changes in the environmental conditions of each growing area.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.14 no.4
• /
• pp.113-120
• /
• 2006

Wastewater generated through the food waste recycling process have known high concentration, BOD 20,000~150,000 mg/L, which has to treat to the proper level because of a ban on reclamation. But it is impossible to treat less than 10 days by existing water treatment plant. Ecodays Ltd. is to treat this wastewater during 2~4 days by ER-1, which can simultaneously induce the modified PFR(Plug Flow Reactor) of the oxygen transfer rate, MLVSS concentration, and influent concentration to top from bottom of reactor. We tested the pilot test about low concentration food wastewater(BOD 16,500 mg/L) and high concentration food wastewater(64,431 mg/L) at the food waste recycling plant of H-Gun(20t/d). Hydraulic retention time(HRT) of ER-1 for low concentration food wastewater is 2.5day. In low concentration conditions, ER-1 treatment efficiency is to appear BOD 99%, COD 98%, TN 97%, and TP 96%. While ER-1 process for high concentration food wastewater treatment is composed 2 stages, which are to be HRT 2.5day for law wastewater and HRT 1.5 day for secondary treatment. In high concentration conditions, ER-1 treatment efficiency is to appear BOD 97%, COD 84%, TN 66%, and TP 95%. It is treated without temperature control about high temperature($50^{\circ}C$) to appear low treatment efficiency in high concentration conditions.

• Journal of Korean Medical classics
• /
• v.7
• /
• pp.198-231
• /
• 1994

Up to now, after I had examined the relation between the origin of Fung(風) and Gi(氣) and the mean of Fung in medical science, I obtained the conclusion being as follows. The first, Fung(風) means a flux of Gi(氣) and Gi shows the process by virtue of the form of Fung, namely, Fung means motion of Gi. In other words, it is flow of power. Accordingly, the process of all power can give a name Fung. The second, Samul(事物) ceaselessly interchange with the external world to sustain the existence and life of themselves. And they make a adequate confrontation against the pressure of the outside. This the motive power of life action(生命活動) is Gi and shows its the process on the strength of Fung. The third, Samul(事物) incessantly releases power which it has to the outside. Power released to the outside forms the territory of the established power in the environment of them and keep up their substance(實體) in the space time(時空). It can be name Fung because the field(場) of this power incessantly flows. The fourth, man operates life on the ground of the creation of his own vigor(生氣) for himself as the life body(生命體) of the independence and self-support. The occurence of this vigor and the adjustment process(調節作用) is supervised by Gan(肝). That is to say, Gan plays a role to regulate and manage the process of Fung or the action of vigor with Fung-Zang(風臟). The fifth, because the Gi-Gi adjustment process(氣機調節作用) of Gan is the same as the process of Fung, Fung that operates the cause of a disease is attributed to the disharmony of the process of the human body Gi-Gi. Therefore, the generating pathological change is attributed to the extraordinary of the function by the incongruity of Gi-Gi(氣機) or the disorder of the direct motion of Gi-Hyul(氣血). Because the incongruity of this Gi-Gi of the human body gives rise to the abnormal of Zung-Gi(正氣) in the human body properly cannot cope with the invasion of 'Oi-Sa(外邪). Furthermore, Fung serves as the mediation body of the invasion of other Sa-Gi(邪氣) because of its dynamics, By virtue of this reason, Fung is named the head of all disease. And because the incongruity of the Gi-Gi has each other form according to Zang-Bu(臟腑), Kyung-Lak(經絡), and a region, the symptoms of a disease appear differently in line with them as well. The sixth, Fung-byung(風病) is approximately separated Zung-Fung(中風) and Fung-byung(猍義의 風病). Zung-fung and Fung-byung is to be attributed to the major invasion of each Jung-gi and Fung-sa(正氣와 風邪). But these two kinds stir up the problem to the direct motion of Gi-hyul(氣血) and the harmony of Gi-Gi in the human body. When one cures it, therefore, Zung-fung has to rectify Gi-Gi and the circulation of Gi-hyul on the basis of the supplement of Jung-gi(正氣) and Fung-byung must make the harmony of Gi-Gi with the Gu-fung(驅風). -Go-gi(調氣), Sun-Gi(順氣). Hang-Gi(行氣) - All existing living things as well as man maintain life on the ground of the pertinent harmony between the soul(精神) and the body(肉體). As soon as the harmony falls down, simultaneously life disappears as well. And Fung which means the outside process between Gi(氣) and Gi(氣) makes the action of their life cooperative and unified, Accordingy, the understanding of Fung, first, has to start wi th the whole thought that not only all Samul(事物) but also the soul and the body are one.

• Journal of Nutrition and Health
• /
• v.47 no.1
• /
• pp.1-11
• /
• 2014

Purpose: Several studies have proven that EGCG, the primary green tea catechin, and glucosamine-6-phosphate (PGlc) reduce triglyceride contents in 3T3-L1 adipocytes. The objective of this study is to evaluate the combination effect of EGCG and PGlc on decline of accumulated fat in differentiated 3T3-L1 adipocytes. Methods: EGCG and PGlc were administered for 6 day for differentiation of 3T3-L1 adipocytes. Cell viability was measured using the CCK assay kit. In addition, TG accumulation in culture 3T3-L1 adipocytes was investigated by Oil Red O staining. We examined the expres-sion level of several genes and proteins associated with adipogenesis and lipolysis using real-time RT-PCR and Western blot analysis. A flow cytometer Calibar was used to assess the effect of EGCG and PGluco on cell-cycle progression of differentiating 3T3-L1 cells. Results: Intracelluar lipid accumulation was significantly decreased by combination treatment with EGCG $60{\mu}M$ and PGlc $200{\mu}g/m$ compared with control and EGCG treatment alone. In addition, use of combination treatment resulted in directly decreased expression of $PPAR{\gamma}$, $C/EBP{\alpha}$, and SREBP1. In addition, it inhibited adipocyte differentiation and adipogenesis through downstream regulation of adipogenic target genes such as FAS, ACSL1, and LPL, and the inhibitory action of EGCG and PGlc was found to inhibit the mitotic clonal expansion (MCE) process as evidenced by impaired cell cycle entry into S phase and the S to G2/M phase transition of confluent cells and levels of cell cycle regulating proteins such as cyclin A and CDK2. Conclusion: Combination treatment of EGCG and PGlc inhibited adipocyte differentiation through decreased expression of genes related to adipogenesis and adipogenic and cell cycle arrest in early stage of adipocyte differentiation.

• Journal of Korea Water Resources Association
• /
• v.53 no.10
• /
• pp.845-859
• /
• 2020

Climate change and recent heat waves have drawn public attention toward other environmental issues, such as water pollution in the form of algal blooms, chemical leaks, and oil spills. Water pollution by the leakage of chemicals may severely affect human health as well as contaminate the air, water, and soil and cause discoloration or death of crops that come in contact with these chemicals. Chemicals that may spill into water streams are often colorless and water-soluble, which makes it difficult to determine whether the water is polluted using the naked eye. When a chemical spill occurs, it is usually detected through a simple contact detection device by installing sensors at locations where leakage is likely to occur. The drawback with the approach using contact detection sensors is that it relies heavily on the skill of field workers. Moreover, these sensors are installed at a limited number of locations, so spill detection is not possible in areas where they are not installed. Recently hyperspectral images have been used to identify land cover and vegetation and to determine water quality by analyzing the inherent spectral characteristics of these materials. While hyperspectral sensors can potentially be used to detect chemical substances, there is currently a lack of research on the detection of chemicals in water streams using hyperspectral sensors. Therefore, this study utilized remote sensing techniques and the latest sensor technology to overcome the limitations of contact detection technology in detecting the leakage of hazardous chemical into aquatic systems. In this study, we aimed to determine whether 18 types of hazardous chemicals could be individually classified using hyperspectral image. To this end, we obtained hyperspectral images of each chemical to establish a spectral library. We expect that future studies will expand the spectral library database for hazardous chemicals and that verification of its application in water streams will be conducted so that it can be applied to real-time monitoring to facilitate rapid detection and response when a chemical spill has occurred.

• Environmental and Resource Economics Review
• /
• v.18 no.2
• /
• pp.279-309
• /
• 2009

Greenhouse gas emissions should be precisely forecast to reduce the emissions from industrial production processes. This study calculated the direct and indirect $CO_2$ emission intensities of 401 industries using the Input-Output tables 2003 and statistical data on the amount of energy use. This study had some limitations in drawing study findings because overseas data were used given the lack of domestic data. Other limiting factors included the oil distribution problems in the oil refinery sector, re-review of carbon neutral, and insufficient consideration of waste treatment. Nonetheless, this study is very meaningful since the direct and indirect $CO_2$ emission intensities of 401 industries were calculated. Specifically, this study considered from the zero-waste perspective the effects of waste, which attract interest worldwide since coke gas and gas from the steel industry are obtained as byproducts for the first time in Korea. According to the results of the analysis of $CO_2$ emission intensity per industry, typical industries whose indirect $CO_2$ emission intensity is high include crude steel making, Remicon, steel wire rods & track rail, cast iron, and iron reinforcing rods & bar steel. These industries produce products using the raw materials produced in the industrial sector whose $CO_2$ emission intensity is high. The representative industries whose direct $CO_2$ emission intensity is high include cement, pig iron, lime & plaster products, andcoal-based compounds. These industries extract raw ore from nature and refine them into raw materials that are useful in other industries. The findings in this study can be effectively used for the following case: estimation of target $CO_2$ emission reduction level reflecting each industrial sector's characteristics, calculation of potential emission reduction of each policy to reduce $CO_2$ emissions, identification of a firm's $CO_2$ emission level, and setting of the target level of emission reduction. Moreover, the findings in this study can be utilized widely in fields such as System of integrated Environmental and Economic Accounting(SEEA) and Material Flow Analysis(MFA) as the current topic of research in Korea.